View
1
Download
0
Category
Preview:
Citation preview
MEGACONVEY DATA SHEET
Megadyne | www.megadynegroup.com | info@megadynegroup.com
BEST USED FOR
GENERAL CHARACTERISTICS
SPECIAL CHARACTERISTICSAntistatic High Conductive Abrasion Resistant Food Approved Flame Retardent Tear Resistant ATEX Certified Pyrolysis Resistant Hydrolysis Resistant Antimicrobial Protection Low Noise Oil & Fat Resistant
A
B
BELT CONSTRUCTION INFORMATION
Material Interply Material
Color Fabric Color
Thickness Plies Thickness
Hardness Weft Hardness
Surface Surface
TECHNICAL INFORMATION IMPERIAL METRIC
Max Production Width
Total Thickness
Mass
Pull Per 1%
Working Temp.
Flexion (A)
Counter Flexion (B)
TOP SIDE (Carrying) CARCASS BOTTOM SIDE (Pulley)
F61/10.05 PVCEXCON 2F/45 W46 V05/V10 FA KB2WH4601
94.49in 2400mm
0.18in 4.57mm
1.13lb/ft² 5.52kg/m²
257lbf/in 45N/mm
+14/+158Fº -10/+70Cº
10.24in 260mm
11.81in 300mm
2 ply white PVC double cover, smooth both
sides. FDA. Flexible weft.
NO NO NO
YES NO NO
NO NO NO
NO NO YES
PVC
White (W)
0.04in 1.02mm
72 Shore A
Smooth - Shiny (_)
PVC
Flexible (F)
2
Flexible (F)
PVC
White (W)
0.02in 0.5mm
72 Shore A
PVC Coated (V...)
MEGACONVEY DATA SHEET
www.megadynegroup.cominfo@megadynegroup.com
© Megadyne 2018
MECHANICAL JOINING METHOD
FRICTION COEFFICIENT (Bottom Side)
Recessed Lacing
Hidden Lacing
Staple Lacing
Plastic Spiral Lacing
Spiral Finger
APF Fasteners
Alligator
Clipper Lacing
Stainless Steel, BA (Brilliant Surface)
Stainless Steel, 2B (Half-Brilliant Surface)
Stainless Steel, 2D (Hot-Laminated Surface)
Rolled Steel Plate
Plastic Sheet Brilliant Surface)
4 Applicable 9 Limited Use 0 Not Applicable
Slider Bed
Flat Rollers
Slider Beds on Both Sides
Channel Trough
Conventional Trough
Incline Conveying
Incline Variation
Bucket Elevator
Conveyor with Accumulation
Slide Bed with Pressure
Bend Conveyor
Knife Edge Conveyor
F61/10.05 PVCEXCON 2F/45 W46 V05/V10 FA KB2WH4601
180 Cº356 Fº
29 PSI2 Bars
180 Cº356 Fº
7.3 PSI0.5 Bars
180 Cº356 Fº
29 PSI2 Bars
180 Cº356 Fº
7.3 PSI0.5 Bars
0 Min 3 Min
YES
YES
RS125
YES
NO
-
20
U2, 2, UA3, U3-2, 4-2
0.75
0.75
0.82
0.75
0.75
Recommended