View
8
Download
0
Category
Preview:
Citation preview
MatrixCOMBO Plating Set.Streamlined set for craniofacial andmandibular trauma and reconstruction.
Primary implantsand instrumentsfrom theMatrixMIDFACEandMatrixMANDIBLEPlating Systems
Organized storagesystem
Reduced inventory
MatrixCOMBO Plating Set. Streamlined set for craniofacial and mandibular trauma and reconstruction.
The aim of surgical fracture treatmentis to reconstruct the bony anatomy andrestore its function. According to theAO, internal fixation is distinguished by anatomical reconstruction, stablefixation, preservation of blood supply,and early, active mobilization.1 Plateand screw osteosynthesis has been established and clinically recognized for some time.
With the AO philosophy at its core, the Matrix plating platform for internalfixation of the craniomaxillofacial skeleton addresses neuro, craniofacial,mandibular, and orthognathic surgery.Matrix is a simple, yet comprehensive,system that offers flexibility and ease of use.
The MatrixCOMBO Plating Set isstreamlined and organized for thetreatment of craniofacial and mandibulartrauma and reconstruction. Key implants and instruments from the MatrixMIDFACE and MatrixMANDIBLEPlating Systems are combined in a singlegraphic case.
For specific product information seethe respective system technique guide.
Note: The MatrixCOMBO Plating Setincludes items shown.
Synthes MatrixCOMBO Plating Set
MatrixCOMBO Plating Set (01.503.400)
1. M.E. Müller, M. Allgöwer, R. Schneider, and H. Willenegger:Manual of Internal Fixation, 3rd Edition. Berlin; Springer-Verlag. 1991.
Mandible Instrument Tray
MatrixMIDFACE Trauma Module
MatrixMANDIBLE Trauma Module
Synthes 1
MatrixMANDIBLE Reconstruction Module
IMF Screw Module
Matrix General Instrument Tray
Lag Screw Instrument and Implant Module
Matrix System– All screws work with all plates
within each Matrix system– Reduced plate/screw profile
where applicable– Improved screw retention and
reduced cam-out* – Standardized instrumentation– Reduced inventory for hospitals
without compromising clinical solution
MatrixCOMBO– Facilitates treatment of
panfacial fractures – Eliminates need to pull separate sets
to treat mandible and midface cases– Modular system allows set to be
configured per surgeon and hospital needs
– Side-loading graphic case for complete set visibility
*Mechanical test data on file at Synthes.
Indications
The Synthes MatrixMIDFACE Plating System is intended foruse in selective trauma of the midface and craniofacial skeleton; craniofacial surgery; reconstructive procedures, and selective orthognathic surgery of the maxilla and chin.
The Synthes MatrixMANDIBLE Plate and Screw System is intended for oral, maxillofacial surgery: - Trauma- Reconstructive surgery- Orthognathic surgery (surgical correction of
dentofacial deformities)
2 Synthes MatrixCOMBO Plating Set
Note: Please refer to package insert for full list of indications, contraindications, warnings and precautions.
MatrixCOMBO Plating Set (01.503.400)
Synthes 3
Instrument Tray for General Instruments (60.511.102)
60.511.104 Finger Mat for use in 60.511.102
306.752 Mini IMF Screw Module
03.503.034 Mini Plate Holder, long
03.503.035 In-Plane Bender for MatrixMIDFACE Plates
03.503.037 Mesh Cutting Scissors, long nose
03.503.038 Plate Bender for Midface Plates, 2 ea.
03.503.039 Plate Cutter for Midface Plates
03.503.062 MatrixMANDIBLE Plate Introducing Forceps
03.503.801 Orbital Retractor, left
03.503.802 Orbital Retractor, right
03.507.000 T-Handle, hex coupling, small
03.507.003 3.5 mm Threaded Reduction tool, self-tapping, 78 mm, hex coupling
03.507.005 2.4 mm Drill Guide
03.511.003 Plate Holder for Reversible Matrix Plates
310.572 2.4 mm Drill Bit, Stryker J-Latch, 75 mm
311.006 Screwdriver Handle, with hex coupling,medium, 2 ea.
311.023 Ratcheting Screwdriver Handle, 2 ea.
Bone Reduction Forceps
398.985 Large
398.986 Small
398.987 Small, Straight
306.752 Mini IMF Screw Module
201.928 2.0 mm IMF Screw, self-drilling, 8 mm, 3 ea.
201.932 2.0 mm IMF Screw, self-drilling, 12 mm, 3 ea.
291.230.98 0.5 mm Precut Cerclage Wire, 175 mm, 2 ea.
291.240.98 0.6 mm Precut Cerclage Wire, 175 mm, 2 ea.
313.939 2.4 mm/3.0 Cruciform Screwdriver Blade,hex coupling
313.97 Holding Sleeve
317.68 1.5 mm Drill Bit , Stryker J-Latch, 8 mm stop, 2 ea.
317.72 1.5 mm Drill Bit , Stryker J-Latch, 12 mm stop, 2 ea.
Note: For additional information, please refer to package insert. For detailed cleaning and sterilization instructions, please refer tohttp://us.synthes.com/Medical+Community/Cleaning+and+Sterilization.htmor to the below listed inserts, which will be included in the shipping container:– Processing Synthes Reusable Medical Devices—Instruments, Instrument Trays
and Graphic Cases—DJ1305– Processing Non-sterile Synthes Implants—DJ1304
MatrixCOMBO Plating Set (01.503.400)
4 Synthes MatrixCOMBO Plating Set
Instrument Tray for Mandible Instruments (60.511.103)
306.712 Insert Tray for Trocar Instrumentation
306.713 Insert tray for Plate Bending Irons andSmall Plate Benders
03.503.036 MatrixMANDIBLE Depth Gauge
03.503.056 MatrixMANDIBLE Combination Bender
03.503.057 MatrixMANDIBLE Short Cut Plate Cutter,for use with 1.5 mm through 2.8 mmplates, 2 ea.
MatrixMANDIBLE Bending Irons03.503.077 Left03.503.078 Right
03.503.079 MatrixMANDIBLE Small Plate Cutter, for usewith 1.0 mm, 1.25 mm and 1.5 mm plates
306.82 Plastic Cup with Lid, for Elastomeric Inserts
Alternative Options for 306.713306.714* Insert Tray for Plate Bending Pliers
60.511.116* Finger Mat
306.714
60.511.116
306.713
*Also available
Synthes 5
306.712 Insert Tray for Trocar Instrumentation
03.503.045 MatrixMANDIBLE Trocar Drill Guide
03.503.047 MatrixMANDIBLE Threaded Trocar DrillGuide
03.503.476 MatrixMANDIBLE 1.5 mm Calibrated DrillBit, J-latch, 125 mm. 2 ea.
03.503.477 MatrixMANDIBLE 1.8 mm Calibrated DrillBit, J-latch, 125 mm, 2 ea.
397.211 Universal Trocar Handle
397.213 2.0 mm Cannula and Obturator
397.232 Malleable C-Retractor
397.42 2.0 mm Cheek Retractor Blade
397.43 2.0 mm Cheek Retractor Ring
MatrixCOMBO Plating Set (01.503.400)
6 Synthes MatrixCOMBO Plating Set
Matrix Auxiliary Module, medium for MatrixMIDFACE System (60.511.110)
60.511.108 Screws, Drill Bits, Blades Insert, withrecessed holes
60.511.112 Orbital Plate and Mesh Insert
60.511.114 0.5 mm/0.7 mm Plate Insert, half height, 2 ea.
306.640 Plate Insert for MatrixMIDFACE GenericModule
60.511.112 Orbital Plate and Mesh Insert
Titanium MatrixNEURO Contourable Mesh, 38 mm x 45 mm, 0.4 mm
04.503.081 Silver, malleable
04.503.082 Blue, rigid
Titanium MatrixMIDFACE Orbital FloorPlates, anatomic, 0.3 mm thick, 2 ea.
04.503.301 Small
04.503.302 Medium
04.503.303 Large
04.503.307 Titanium MatrixMIDFACE Orbital MeshPlate, 0.3 mm thick, 2 ea.
306.640 Plate Insert for MatrixMIDFACEGeneric Module
Titanium MatrixMIDFACE PreformedOrbital Plates, 2 ea.
04.503.801 Small, left
04.503.802 Large, left
04.503.811 Small, right
04.503.812 Large, right
Synthes 7
60.511.108 Screws, Drill Bits, Blades Insert, withrecessed holes
Titanium MatrixMIDFACE Screws, self-drilling
Length (mm) Pkgs. of 5
04.503.223.05 3 2
04.503.224.05 4 10
04.503.225.05 5 10
04.503.226.05 6 10
04.503.228.05 8 4
Titanium MatrixMIDFACE Screws, self-tapping
Length (mm) Pkgs. of 5
04.503.210.05 10 2
04.503.212.05 12 2
Titanium MatrixMIDFACE Emergency Screws Length (mm) Pkgs. of 1
04.503.233.01 3 2
04.503.234.01 4 10
04.503.235.01 5 10
04.503.236.01 6 10
04.503.238.01 8 4
04.503.240.01 10 2
04.503.242.01 12 2
Matrix 1.1 mm Drill Bits, Stryker J-latch, 2 ea.
03.503.244 4 mm stop
03.503.246 6 mm stop
03.503.248 8 mm stop
MatrixMIDFACE 1.25 mm Drill Bits, StrykerJ-latch, 2 ea.
03.503.110 10 mm stop
03.503.112 12 mm stop
03.503.202 MatrixMIDFACE Screwdriver Blade, hexcoupling, self-retaining, 76 mm, 2 ea.
Alternative Option for 60.511.108
60.511.107* Screws, Drill Bits, Blades Insert, with non-recessed holes
60.511.108
60.511.107
*Also available
MatrixCOMBO Plating Set (01.503.400)
8 Synthes MatrixCOMBO Plating Set
Matrix Auxiliary Module, medium, for MatrixMIDFACE System (60.511.110)
60.511.114 0.5 mm/0.7 mm Plate Insert, half height, 2 ea.
Titanium MatrixMIDFACE Plates, 0.5 mm thick
04.503.322 H-Plate, 11 holes, 2 ea.
04.503.323 Oblique L-Plate, 2 x 3 holes, left, 3 ea.
04.503.324 Oblique L-Plate, 2 x 3 holes, right, 3 ea.
04.503.325 Oblique L-Plate, 3 x 4 holes, left, 3 ea.
04.503.326 Oblique L-Plate, 3 x 4 holes, right, 3 ea.
04.503.327 T-Plate, 3 x 4 holes, 2 ea.
04.503.334 Oblique L-Plate, 4 x 6 holes, left, 3 ea.
04.503.335 Oblique L-Plate, 4 x 6 holes, right, 3 ea.
04.503.343 Orbital Rim Plate,12 holes, 3 ea.
04.503.346 Adaption Plate, 20 holes, 3 ea.
04.503.347 Y-Plate,1 x 3 holes, 2 ea.
04.503.348 Double X-Plate, 6 holes, 2 ea.
04.503.360 Box Plate, 4 holes, 5 x 10 mm, 2 ea.
04.503.361 Box Plate, 4 holes, 10 x 10 mm, 2 ea.
04.503.362 X-Plate, 4 holes, 2 ea.
04.503.363 Strut Plate, 18 holes, 2 ea.
Titanium MatrixMIDFACE Plates, 0.7 mm thick
04.503.352 H-Plate, 11 holes, 2 ea.
04.503.353 Oblique L-Plate, 2 x 3 holes, left, 3 ea.
04.503.354 Oblique L-Plate, 2 x 3 holes, right, 3 ea.
04.503.355 Oblique L-Plate, 3 x 4 holes, left, 3 ea.
04.503.356 Oblique L-Plate, 3 x 4 holes, right, 3 ea.
04.503.357 T-Plate, 3 x 4 holes, 2 ea.
04.503.364 Oblique L-Plate, 4 x 6 holes, left, 3 ea.
04.503.365 Oblique L-Plate, 4 x 6 holes, right, 3 ea.
04.503.373 Orbital Rim Plate,12 holes, 3 ea.
04.503.376 Adaption Plate, 20 holes, 3 ea.
04.503.377 Y-Plate, 1 x 3 holes, 2 ea.
04.503.378 Double Y-Plate, 6 holes, 2 ea.
04.503.390 Box Plate, 4 holes , 5 mm x 10 mm, 2 ea.
04.503.391 Box Plate, 4 holes , 10 mm x 10 mm, 2 ea.
04.503.392 X-Plate, 4 holes, 2 ea.
04.503.393 Strut Plate, 18 holes, 2 ea.
Note: The 60.511.114 holds either 0.5 mm thick or 0.7 mm thickMatrixMIDFACE plates.
Synthes 9
Alternative Options for 60.511.114
60.511.113* 0.4 mm Plate Insert, half height
Titanium MatrixMIDFACE Plates, 0.4 mm thick
04.503.313 Orbital Rim Plate, 12 holes
04.503.316 Adaption Plate, 20 holes
04.503.317 Y-Plate, 1 x 3 holes
04.503.318 Double Y-Plate, 6 holes
04.503.330 Box Plate, 4 holes, 5 mm x 10 mm
04.503.331 Box Plate, 4 holes, 10 mm x 10 mm
04.503.332 X-Plate, 4 holes
04.503.333 Strut Plate, 18 holes
60.511.115* 0.8 mm Plate Insert, half height
Titanium MatrixMIDFACE Plates, 0.8 mm thick
04.503.382 H-Plate, 11 holes
04.503.383 Oblique L-Plate, 2 x 3 holes, left
04.503.384 Oblique L-Plate, 2 x 3 holes, right
04.503.385 Oblique L-Plate, 3 x 4 holes, left
04.503.386 Oblique L-Plate, 3 x 4 holes, right
04.503.387 T-Plate, 3 x 4 holes
04.503.394 Oblique L-Plate, 4 x 6 holes, left
04.503.395 Oblique L-Plate, 4 x 6 holes, left
04.503.396 Adaption Plate, 20 holes
04.503.397 Orbital Rim Plate, 12 holes
*Also available
10 Synthes MatrixCOMBO Plating Set
MatrixCOMBO Plating Set (01.503.400)
306.781 Small Plate Insert for 1.0 mm MalleableMatrixMANDIBLE Plates
306.782 Insert Tray for 1.0 mm MalleableMatrixMANDIBLE Plates
306.783 Insert Tray for 1.25 mm MalleableMatrixMANDIBLE Plates
306.784 Insert Tray for 1.5 mm MalleableMatrixMANDIBLE Plates
306.785 Insert Tray for 2.0 mm MalleableMatrixMANDIBLE Plates
306.786 Matrix Auxiliary Insert Tray, Medium
306.772 Generic MatrixMANDIBLE Screw Insert Tray,for 2.0 mm, 2.4 mm and 2.9 mm screws
306.781 Small Plate Insert for 1.0 mm MalleableMatrixMANDIBLE Plates
Titanium MatrixMANDIBLE Plates, malleable, 1.0 mm thick, 2 ea.
04.503.701 2 x 2 Hole Mini Plate, tension band, narrow
04.503.703 3 x 3 Hole Mini Plate, tension band, narrow
04.503.707 4 Hole Box Plate
04.503.708 8 Hole Strut Plate
04.503.709 8 Hole Strut Plate, curved, mini
04.503.750 2 x 2 Hole Mini Plate, tension band, broad
04.503.751 2 x 3 Hole Mini Plate, tension band, broad
04.503.752 3 x 3 Hole Mini Plate, tension band, broad
306.782 Insert Tray for 1.0 mm MatrixMANDIBLEPlates
Titanium MatrixMANDIBLE Plates, 1.0 mm thick, 2 ea.
04.503.702 2 x 2 Hole Mini Plate, tension band, narrow
04.503.704 3 x 3 Hole Mini Plate, tension band, narrow
04.503.705 12 Hole Adaption Plate
04.503.706 20 Hole Adaption Plate
04.503.780 Pre-Bent Tension Band Plate, right, 2 x 2 holes
04.503.781 Pre-Bent Tension Band Plate, left, 2 x 2 holes
MatrixMANDIBLE Trauma Module (60.511.105)
Synthes 11
306.783 Insert Tray for 1.25 mmMatrixMANDIBLE Plates
Titanium MatrixMANDIBLE Plates, 1.25 mm thick, 2 ea.
04.503.710 2 x 2 Hole DCP Plate
04.503.711 2 x 2 Hole Crescent Plate
04.503.712 3 x 3 Hole DCP Plate
04.503.713 3 x 3 Hole Crescent DCP Plate
04.503.714 3 X 3 Hole Angle DCP Plate
04.503.756 12 Hole Plate
306.784 Insert Tray for 1.5 mmMatrixMANDIBLE Plates
Titanium MatrixMANDIBLE Plates, 1.5 mm thick, 2 ea.
04.503.715 6 Hole Plate
04.503.716 3 x 3 Hole Plate
04.503.717 12 Hole Plate
04.503.718 20 Hole Plate
04.503.721 3 x 3 Hole Angle Plate
04.503.722 3 x 3 Hole Crescent Plate
04.503.723 2 x 2 Hole DCP Plate
04.503.724 3 x 3 Hole DCP Plate
306.785 Insert Tray for 2.0 mmMatrixMANDIBLE Plates
Titanium MatrixMANDIBLE Plates, 2.0 mm thick, 2 ea.
04.503.726 2 x 2 Hole Crescent Plate, broad
04.503.727 3 x 3 Hole Crescent Plate, broad
04.503.728 6 Hole Plate
04.503.729 12 Hole Plate
04.503.731 3 x 3 Hole Angle Plate, broad
306.786 Matrix Auxiliary Insert Tray, medium
Alternative options for 306.781,306.782, 306.783, 306.785
306.787* Auxiliary Insert Tray, small (not shown)
*Also available 306.786
12 Synthes MatrixCOMBO Plating Set
MatrixCOMBO Plating Set (01.503.400)
MatrixMANDIBLE Trauma Module (60.511.105)
306.772 Generic MatrixMANDIBLE Screw InsertTray, for 2.0 mm, 2.4 mm and 2.9 mmscrewsHolds up to 240 screws (including 40emergency screws
2.0 mm Titanium MatrixMANDIBLE Screws, self-tappingLength (mm) Pkgs. of 5
04.503.405.05 5 2
04.503.406.05 6 3
04.503.408.05 8 2
04.503.410.05 10 2
04.503.412.05 12 2
04.503.414.05 14 1
04.503.416.05 16 1
2.0 mm Titanium MatrixMANDIBLE Locking Screws, self-tapping
Length (mm) Pkgs. of 5
04.503.605.05 5 1
04.503.606.05 6 2
04.503.608.05 8 2
04.503.610.05 10 2
04.503.612.05 12 2
04.503.614.05 14 1
04.503.616.05 16 1
2.4 mm Titanium MatrixMANDIBLE Screws, self-tapping*Length (mm) Pkgs. of 1
04.503.435.01 5 7
04.503.436.01 6 8
04.503.438.01 8 7
04.503.440.01 10 7
04.503.442.01 12 7
04.503.444.01 14 6
04.503.446.01 16 6
* 2.4 mm screw is the emergency screw for a 2.0 mm screw.
Synthes 13
2.4 mm Titanium MatrixMANDIBLE Locking Screws, self-tapping
Length (mm) Pkgs. of 1
04.503.638.01 8 5
04.503.640.01 10 10
04.503.642.01 12 10
04.503.644.01 14 10
04.503.646.01 16 5
04.503.648.01 18 5
2.7 mm Titanium MatrixMANDIBLE Emergency Screws, self-tapping
Length (mm) Pkgs. of 1
04.503.465.01 5 1
04.503.466.01 6 1
04.503.468.01 8 1
04.503.470.01 10 1
04.503.472.01 12 1
04.503.474.01 14 1
04.503.476.01 16 1
MatrixMANDIBLE 1.5 mm Drill BitsJ-latch, 50 mm, 2 ea.
03.503.404 4 mm stop03.503.406 6 mm stop03.503.408 8 mm stop03.503.412 12 mm stop
03.503.451 MatrixMANDIBLE 1.5 mm Drill Bit, J-latch,90 mm, for 03.503.043, 2 ea.
03.503.461 MatrixMANDIBLE 1.8 mm Drill Bit, J-latch,90 mm, for 03.503.044
03.503.043 1.5 mm Threaded Drill Guide, short
03.503.044 1.8 mm Threaded Drill Guide, short
03.503.072 MatrixMANDIBLE/THORAX Self-RetainingScrewdriver Blade, long, 2 ea.
14 Synthes MatrixCOMBO Plating Set
MatrixCOMBO Plating Set (01.503.400)
306.610 Auxiliary Module, small
60.511.109 Insert for 2.0 mm, 2.5 mm and 2.8 mmMatrixMANDIBLE Reconstruction Plates
Titanium MatrixMANDIBLE Plates, 2.5 mm thick, 2 ea.
04.503.738 20 Hole Reconstruction
04.503.739 7 x 23 Hole Angle Reconstruction Plate, left
04.503.740 7 x 23 Hole Angle Reconstruction Plate,right
03.503.700 Bending Insert Holder– Holds up to 16 bending inserts
03.503.080 MatrixMANDIBLE Bending Insert, 8 ea.
MatrixMANDIBLE Modules and Trays
03.503.700
Synthes 15
306.755 Lag Screw Module 313.939 2.4 mm/3.0 mm Cruciform Screwdriver
Blade, hex coupling
313.97 Holding Sleeve
397.225 Lag Screw Cannula
397.226 Lag Screw Pointer
397.282 1.8 mm Insert Drill Guide
397.285 2.4 mm Drill Guide
2.4 mm Titanium Cortex Screws, self-tapping, 2 ea.
Length (mm) Length (mm)
401.520E 20 401.532E 32
401.522E 22 401.534E 34
401.524E 24 401.536E 36
401.526E 26 401.538E 38
401.528E 28 401.540E 40
401.530E 30
310.512 1.8 mm Drill Bit, Stryker J-latch, 100 mm, 2 ea.
310.522 1.8 mm Drill Bit, Stryker J-latch, 125 mm, 2 ea.
310.542 2.4 mm Drill Bit, Stryker J-latch, 125 mm, 2 ea.
310.805 Countersink with centering pins, for 2.4 mm screws, hex coupling
16 Synthes MatrixCOMBO Plating Set
Set also includes
MatrixCOMBO Plating Set (01.503.400)
MatrixMANDIBLE Bending Templates
03.503.160 for Narrow Tension Band Plates
03.503.161 for 1.0 mm Broad Tension Band Plates
03.503.162 for 1.0 mm Adaption Plates
03.503.163 for 1.25 mm Straight Plates
03.503.164 for 1.25 mm 2 x 2 Hole Crescent Plates
03.503.165 for 1.25 mm 3 x 3 Hole Crescent Plates
03.503.166 for 1.25 mm Angle Plates
03.503.167 for 1.25 mm Adaption Plates
03.503.168 for 1.5 mm Straight Plates
03.503.169 for 1.5 mm 3 x 3 Hole Straight Plates
03.503.170 for 1.5 mm 3 x 3 Hole Angle Plates
03.503.171 for 1.5 mm 6 Hole Crescent Plates
03.503.172 for 1.5 mm Broad 2 x 2/3 x 3 Hole Plates
03.503.173 for 2.0 mm Broad Crescent Plates
03.503.174 for 2.0 mm Straight Plates
03.503.175 for 2.0 mm Broad 3 x 3 Hole Angle Plates
03.503.180 for 2.5 mm/2.8 mm StraightReconstruction Plates
03.503.181 for 2.5 mm/2.8 mm Angle ReconstructionPlates
Synthes 17
Also Available
MatrixMIDFACE Bending Templates
03.503.360 for Orbital Floor Plate, anatomic, small
03.503.361 for Orbital Floor Plate, anatomic, medium
03.503.362 for Orbital Floor Plate, anatomic, large
03.503.365 for Orbital Mesh Plates
03.503.366 for Adaption Plates
03.503.367 for Orbital Rim Plates
03.503.368 for Oblique L-Plates, 2 x 3 holes
03.503.369 for Oblique L-Plates, 3 x 4 holes
03.503.370 for Oblique L-Plates, 4 x 6 holes
03.503.371 for Y-Plates, 1 x 3 holes
03.503.372 for X-Plates
03.503.373 for H-Plates
03.503.374 for T-Plates
03.503.375 for Box Plates, 5 mm x 10 mm
03.503.376 for Box Plates, 10 mm x 10 mm
03.503.377 for Strut Plates
03.503.378 for Silver Double Y-Plates
03.503.379 for Blue Double Y-Plates
03.503.380 for Pink Double Y-Plates
MatrixMIDFACE Screwdriver Blades
03.503.201 Self-retaining, hex coupling, 52 mm03.503.203 Self-retaining, hex coupling, 96 mm
03.503.205 with Spring Holding Sleeve, short, hex coupling, 79 mm
03.503.206 with Spring Holding Sleeve, long, hex coupling, 95 mm
Titanium MatrixMIDFACE Adaption Plates
04.503.314 6 holes, 0.4 mm thick
04.503.315 8 holes, 0.4 mm thick
04.503.344 6 holes, 0.5 mm thick
04.503.345 8 holes, 0.5 mm thick
04.503.374 6 holes, 0.7 mm thick
04.503.375 8 holes, 0.7 mm thick
04.503.398 6 holes, 0.8 mm thick
04.503.399 8 holes, 0.8 mm thick
MatrixMandible Screws04.503.418.05 2.0 mm Titanium MatrixMANDIBLE Screw,
self-tapping, 18 mm
04.503.618.05 2.0 mm Titanium MatrixMANDIBLELocking Screw, self-tapping, 18 mm
04.503.448.01 2.4 mm Titanium MatrixMANDIBLE Screw,self-tapping, 18 mm
04.503.478.01 2.7 mm Titanium MatrixMANDIBLEEmergency Screw, self-tapping, 18 mm
04.503.648.01 2.4 mm Titanium MatrixMANDIBLE Locking Screw, self-tapping, 18 mm
Screwdriver Handles, hex coupling
03.511.004 locking, medium
311.005 small
311.007 large
03.503.073 MatrixMANDIBLE/THORAX ScrewdriverFixed Handle, self-retaining
Graphic Case Components
60.511.100 Graphic Case for MatrixCOMBO Set (includes lid)
60.511.101 Lid for MatrixCOMBO Set
60.511.106 Tray Lid
Label Sheets for MatrixMANDIBLE System
306.704 for Small Plate Module
306.706 for Large Plate Module
306.735 for Instrument Tray (306.731)
306.736 for Instrument Tray (306.732)
306.744 for Trocar Instrument Module (306.733)
306.762 Strength Gradient
306.774 for Screw Module
306.766 for Lag Screw Module
306.788 for Small Plate Insert
690.612 Screw Length Label Sheet for Calibrated Drill Bits
* Please refer to MatrixMANDIBLE and MatrixMIDFACE brochures for additionalproduct availability.
18 Synthes MatrixCOMBO Plating Set
Label Sheets for MatrixMIDFACE System
306.522 for MatrixNEURO Module
306.628 for Drill Bits and Screwdriver Blades
306.630 for Small Auxiliary Module (306.610)
306.634 for 0.4 mm Plates
306.635 for 0.5 mm Plates
306.636 for Screws
306.637 for 0.7 mm Plates
306.638 for 0.8 mm Plates
306.639 for Orbital Plates
306.641 for Preformed Orbital Plates
60.511.020 for MatrixMIDFACE andMatrixORTHOGNATHIC Strength Gradients
306.728 Calibrated Drill Bit Holder
347.98 Plate Holder for 1.0 mm–2.0 mm Plates
01.503.400EPI MatrixCOMBO Plating Set—Implants
01.503.400EPA MatrixCOMBO Plating Set—Instrumentsand Cases
01.503.401 MatrixCOMBO Plating Set—Midface andMandible Trauma
01.503.402 Mandible Reconstruction Module forMatrixCOMBO Plating Set
01.503.403 Lag Screw Module for MatrixMANDIBLEPlating System
01.503.404 Mini IMF Module for MatrixMANDIBLEPlating System
01.503.405 Compact IMF Module for MatrixMANDIBLEPlating System
Also Available
Screw Length Markers
304.103W 3 mm self-drilling
304.104 4 mm
304.104W 4 mm self-drilling
304.105 5 mm
304.105W 5 mm self-drilling
304.106 6 mm
304.106W 6 mm self-drilling
304.108 8 mm
304.108W 8 mm self-drilling
304.110 10 mm
304.112 12 mm
304.114 14 mm
304.116 16 mm
304.118 18 mm
304.120 20 mm
304.122 22 mm
304.124 24 mm
304.126 26 mm
304.128 28 mm
304.130 30 mm
304.132 32 mm
304.134 34 mm
304.136 36 mm
304.138 38 mm
304.140 40 mm
Synthes CMF1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056
Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
© 2010 Synthes, Inc. or its affiliates. All rights reserved. Synthes is a trademark of Synthes, Inc. or its affiliates. Printed in U.S.A. 8/10 J10015-A
www.synthes.com
Recommended