View
1
Download
0
Category
Preview:
Citation preview
Machine Health for the Machine Maker
Ed SpenceThe Machine Instrumentation Group
NIST Industry Forum May 9th, 2018
NIST Industry Forum May 2018 1
Ed Spence is the Founder and Managing Director of
The Machine Instrumentation Group, a collaborative network
of CBM product and service providers helping machine
makers develop their own CBM instrumentation.
From 2008 to 2018, Ed was the Marketing Manager for Analog
Devices MEMS Sensor Technology Group, where he defined
the accelerometer roadmap for Condition Monitoring.
NIST Industry Forum May 2018 2
Enabling IIoT Technologies
Chip Scale Sensors
MEMS accelerometers enable higher levels of integration,
smaller form factors and digital interface
Predictive Analytics
Data engineering approaches improve diagnostic accuracy and add predictive insights
Wireless Networks
Lower deployment costs for on-line continuous
monitoring
Data dashboards
Cloud /Web server based data visualization,
distribution and analysis
NIST Industry Forum May 2018 3
Condition Monitoring Today...
• Predominantly manual by 3rd party service providers or plant maintenance
• Low cost way to monitoring Balance-of-Plant
Triaxial Accelerometers
NIST Industry Forum May 2018 4
The Transformational Semiconductor Industry...
NIST Industry Forum May 2018 5
21kHz
30kHz
45kHz
MEMS Accelerometer noise decreasing with resonant frequencies increasing
• Low power, low cost radios
• Chip antennas
• Micro-power controllers and processors
Solid StateAccelerometers
Evolution of Bluetooth bit rates
<5kHz
The Digital Condition Monitoring Sensor…
NIST Industry Forum May 2018 6
SOLID STATE ACCELEROMETERS
DIGITIZATION & EMBEDDED PROCESSING DIGITAL INDUSTRIAL
INTERFACE
SCADA
PLC
Machine Controller
Chip sensors enable highly integrated ‘smart
sensors’
MEMS
MEMS MEM
S
MEMS
MEMS
MEMS
MEMS
MEMS
MEMS
MEMS
MEMS
MEMS
MEMS
MEMS MEMS
SEC
ITT Gould
KCF Tech.(G1)
ABB (WiMON100)
PCBGE Bently
WaitesWireless
SEMEQ
Petasense
Erbessd
Augury
ABB (Ability)
RONDS
Reliability Point
MOON
2010 2017
Pruftechnik
Acc
eler
om
eter
3d
B B
and
wid
th
KCF Tech.(G2)
SEMEQ(G2)
MEMS
I-Care
Fluke
Emerson CSI(G2)
ITT Gould (2)
GE Bently(Baker Hughes)
GTI
BossPac
Petasense
iQunet
amc TECH
SKF
NIST Industry Forum May 2018 7
The OEM /Machine Maker Opportunity...
CBM value capture
• Embedded CBM sensors
• Digital interface to local controller
• Customized health indicators
• Automate ‘tribal knowledge’
• Service based revenue
NIST Industry Forum May 2018
Domain knowledge
Integratedsensors
Digital interfaces
Monitoring Software & Services
8
OEM Incentives to Provide Prognostics / Monitoring
• Value proposition – condition monitoring services
• Workforce changes• Senior/Experienced users continue to retire
• Leaner maintenance • No time to become HW specific experts, busy running the plant
• Technology has evolved enabling cost effective solutions• Sensing / communications / embedded solutions / etc
• Smart Phone Culture• People are becoming used to having access to information
• Expanding the universe of equipment monitored
• Expanded fault coverage
Shipping more intelligent hardware
NIST Industry Forum May 2018 9
Expanding the Application of CBMCBM 1.0
On-Line Systems
Critical plant
CBM 2.0Route based
Expands coverage to BoP
CBM 3.0Wireless networks
Continuous monitoring for BoP
Expands coverage to new applications
CBM 4.0Embedded sensors
Pre-instrumented OEM equipment
Expanding CBM coverage to new equipment
NIST Industry Forum May 2018 10
Adapting CBM to Specialized Equipment
• Fixed frequency rotation
• Monitoring and diagnostic techniques well understood
• Common library of known faults
• Unique motion signatures and fault modes
• Diagnostics are visual
• Fault knowledge is ‘tribal’
• Many hardware configurations
Motor-Pump Train
Control Valve& Actuator
NIST Industry Forum May 2018 11
A General Process for Machine CBM Development...
NIST Industry Forum May 2018
CBM instrumentation
Develop Health Indicators
Assessment Consulting
Add (custom) sensors
Monitor predictive health indicators
12
*New health indicators can often be development directly from available operational control data. An analytics pilot study can be performed before adding any new instrumentation...
*
Lessons Learned so Far and Future Work...(from an Emerson Fisher – TMIG Case Study, The Reliability Conference, Las Vegas, April 2018)
• Acquiring and evaluating new measurands requires new sensors
• Exploring techniques for expanded health monitoring is multi-faceted• Leverage and manage the convergence of
new technologies
• Accelerating Time-to-Market• Force multiplier using contractors vs
developing everything in-house
• Capturing domain knowledge• SME informed health indicators
• Holy grail: automated CBM
Expand Sensor Deployment Collect More Field Data
Embed Next Generation Sensor Technologies
Improved Data Analytics –Machine Health Indicators Prognostics Dashboard
NIST Industry Forum May 2018 13
Thank you!
Ed Spence I ed.spence@machineinstrumentation.com I 1 (781) 439 1277
NIST Industry Forum May 2018 14
Recommended