View
6
Download
0
Category
Preview:
Citation preview
Machine Guarding24/7 Security
Machine Guarding Applications
Robotic Guards for Robotic Equipment Protection - 4
Machine Guard Work and Test Area Partition - 5
Machine Guards for Conveyor Protection - 6
Machine Guard Industrial Partition - 8
Sheet Metal Welding Cell Partition - 9
Conveyor Perimeter Protection Guardrail - 10
QuickShip Machine Guarding - 11
Th nk it™
We can build it
Machine Guarding24/7 Security
Robotic GuardsRobotic Equipment Protection
Cogan robotic machine guards protect your per-sonnel and equipment from accidents associ-ated with moving machinery. Ideally suited for guarding robotic and automated equipment, our modular machine guards are engineered to help you set up a protected area quickly and easily. Cogan robotic machine guards boast a sturdy, all-steel construction, are wear-resistant and maintenance-free. Available in our powder-coat-ed midnight black and safety yellow paint finish.
Protect your employees when operating or working near ro-botics equipment with Cogan robotic machine guards.
4
Machine GuardWork & Test Area Partition
Keep volatile or high-pressure work and test ar-eas safely enclosed with a sheet metal and Lex-an machine guard partition. Sturdy corrugated steel sheets help to contain sparks, spray and other spatter, while Lexan panels allow for clear visibility and light penetration. Special 4” sweep provides extra clearance for moving parts and electrical wires. Optional mezzanine integration creates a load bearing roof for any equipment that must be accessed from above the work area.
Secure hazardous work zones and high-temperature testareas with a sheet metal & Lexan machine guard partition.
5
Machine GuardConveyor Protection
need for proper safeguarding is more import-ant than ever before. Cogan conveyor machine guards serve to seperate conveyors and other moving machinery from warehouse traffic. The fully-framed partition system allows access to equipment only where necessary. This creates clearly defined work areas and safe walkways for pedestrians circulation. Available in our midnight black and safety yellow powder-coated paint fin-ish for maximum visibility and wear-resistance.
In today’s world, where automation has become essential to manufacturing and distribution, the
Secure and separate conveyor systems and moving machin-ery from warehouse traffic with Cogan conveyor machine guards.
6
Cogan products are built to last
Our promise is for life
Machine GuardIndustrial Partition
industrial manufacturing. Moving machine parts, robotics and other mechanical equipment have the potential to inflict serious harm on your em-ployees. Install Cogan machine guards and put an end to preventable injuries. Built from heavy-du-ty 2” x 1” x 10GA framed welded wire mesh, our machine guards create a secure barrier between your workers and your equipment. The ultra-re-silient design means machine guards are strong enough to withstand forklift collisions.Cogan machine guard partitions offer protection
against occupational hazards associated with
Heavy-duty protection to keep your process running smooth-ly. Install an industrial machine guard partition and put an end to preventable injuries.
8
Sheet MetalWelding Cell Partition
Keep your employees safe from moving machin-ery, robotics equipment and welding zones with Cogan sheet metal partitions. Our sheet metal partitions offer the same trusted protection as our wire mesh enclosures, but with the added benefit of complete privacy. Made from heavy-du-ty corrugated steel panels framed in 1 ¼” x 1 ¼” x 12GA structural angle, sheet metal partitions are an excellent way to divide and secure large areas in your plant, warehouse or office building.
Segregate automated machin-ery, enclose welding areas and guard robotics equipment with Cogan sheet metal partitions.
9
Conveyor PerimeterProtection Guardrail
installed – engineered to withstand a 10,000-lb impact at 4 mph. That means the equipment on your shop floor will be protected from traffic ac-cidents and other hazards. Use Cogan heavy-du-ty guardrails to safeguard machinery, conveyors, rack-aisle-ends, inventory areas, and loading docks. Our guardrail barriers work equally well protecting mezzanines, offices, walls, heating and cooling equipment, and computer control centers. Built from the best quality materials, our guard-
rails are strong, adaptable and – when properly
Trouble-free for your peace of mind. Install a Cogan heavy-du-ty guardrail system and create a protective shield between your workers and your equipment.
10
QuickShipIn Stock. Ready To Ship.or Accelerated Delivery.
Cogan QuickShip is all about you – your needs, your budget, your timeline. No waiting. No delays. Cogan QuickShip is on time, all the time.
HE AVY-DUTY GUARDRAILSItem Description Item #A. Rails2’ Rail (19” exact length) QS-GR23’ Rail (31” exact length) QS-GR34’ Rail (43” exact length) QS-GR45’ Rail (55” exact length) QS-GR56’ Rail (67” exact length) QS-GR67’ Rail (79” exact length) QS-GR78’ Rail (91” exact length) QS-GR89’ Rail (103” exact length) QS-GR910’ Rail (115” exact length) QS-GR10B. Columns & Accessories Double Rail Column (centered baseplate) QS-GPDCDouble Rail Column (offset baseplate) QS-GPDOSingle Rail Column (centered baeplate) QS-GPSCSingle Rail Column (offset baseplate) QS-GPSOLift-Out Brackets (pair) QS-GL15/8” x 4 1/2” Floor Anchors (4x/pkg) QS-GFA5
MATERIAL FOR THIS DOUBLE RAIL GUARDRAIL SYSTEM4x: Double rail column (centered baseplate)1x: Double rail column (offset baseplate)4x: 10’ rail2x: 3’ rail2x: 2’ rail
10’-0” C/C dimension 10’-0” C/C dimension 2’-0” C/Cdimension
OVERALL DIMENSION (incl. baseplates) 22’-10”
3’-0
” C/C
dim
ensi
on
O.D.
(inc
l. ba
sepl
ates
)3’
-7 1
/2”
FINISHPowder-coated safety yellow
QuickShipIn Stock. Ready to Ship
12
Rail
Double RailColumn
Single RailColumn
44”
18”
CenteredBaseplate
OffsetBaseplate
Lift-outBracket
12”
SPECIFICATIONS12-gauge steel / unassembled componentsAbsorbs impact of a 10,000 lb load at 4 mph. 12-gauge roll-formed steel, 12” high profile, 3/16” thick end plates punched with two ø9/16” connection holes. 5“ x 5” seam welded square columns welded to a 10” x 10” x 1/2” baseplate with ø3/4” mounting holes. Black plastic post caps. Install with floor anchors (sold separately). IN STOCK.
Layout Example(Plan View)
Recommended