View
3
Download
0
Category
Preview:
Citation preview
800.4.STAHLS (800.478.2457) | info@stahls.com | stahls.com
PATCH SIZE LIMITSArea - Min 1" X 1" (+/-1 mm) Max 6" X 6" (+/-1 mm)
Thickness - Approximately 1.5mm thick (may vary)
MINIMUM TEXT SIZESmallest character should be at least 1mm in height.
LEATHER COLOR Caramel, taupe & natural. As with all genuine leather products, shades of leather can vary.
ADHESIVEHeat Applied - to be applied with a professional heat press. Not recommend for heat sensitive fabrics.Pressure Sensitive - sticker backing for use on hard goods. Not recommended for surfaces that may contain an oil finish such as silicone or any type of outdoor goods. Also, suggested option if patches will be sewn-on, in which we recommend a 3mm margin around the design.
LIMITATIONSSince the product is applied with heat, it is not recommended to use on heat sensitive fabrics (ex. some nylons, silk, leather, wool, fleece).
COMPATIBILITYHeat Applied - Cotton, Polyester, Cotton/Poly Blends Pressure Sensitive - Smooth Surfaces on Hard Goods
ART RENDERING• Digital sample via email• Available in 24 hours• Can be edited
PRODUCTION TIME• Upon rendering approval, 5 days plus shipping per
500pcs• Samples available upon request
WASHING INFORMATIONThis product is not intended to be used on goods that require washing or dry cleaning.
SHELF LIFEOne-year shelf life before applying (room temperature controlled environment).
SPECIFICATIONS SHEET
Natural
Caramel
Taupe
Leather Patches
1.011420
800.4.STAHLS (800.478.2457) | info@stahls.com | stahls.com
APPLICATION INSTRUCTIONSLeather PatchesHEAT APPLY WITH A PROFESSIONAL HEAT PRESS
360 IQ™ HAT PRESS Time: 20-30 seconds Temp: 280°F Top / 320°F Bottom Pressure: Medium Cover Sheet: 1/8" Foam Pad
HEAT PRESS WITH BOTTOM HEAT Time: 20 seconds Temp: 200°F Top / 320°F Bottom Pressure: MediumCover Sheet: FlexStyle® Pad
HEAT PRESS WITH TOP HEAT Time: 20 seconds Temp: 300°FPressure: Medium Cover Sheet: FlexStyle® Pad• Turn the garment inside out, thread it on the
heat press with the adhesive side of the emblem facingthe upper platen
• Place the orange FlexStyle® Pad on the front of the design –not adhesive side of the transfer.
• Note: For best application results, bottom and top heat is recommended. Application tape can damage the leather and is not recommended
FABRIC COMPATIBILITY• 100% Cotton
• 100% Polyester
• Cotton/Poly Blends
APPLICATION • Make sure the application area is thoroughly
cleaned. Rubbing alcohol can be used.• Remove paper backing and press firmly on the
desired location.
FOR USE ON Smooth, hard surfaces. Not recommended for surfaces that may contain an oil finish such as silicone or any type of outdoor goods.
PRESSURE SENSITIVE APPLICATION
Recommended