LCD Projector Set Up Instructions So, you want to set up the LCD projector, but you’re unsure...

LCD ProjectorSet Up Instructions

So, you want to set up the LCD projector, but you’re unsure where to start? Just follow these instructions…

Make sure that you have the following items:

• LCD Projector

• 25 foot S-Video cable

• Power cord

Plug the power cord and S-Video cable into the projector.

Plug power cord into an outlet.

Plug S-Video cable into computer, above the monitor cable.

Turn on projector, press the “Power button, and wait for the light to

turn green.

Press the “S-Video” button, and wait for that light to turn green. (If it doesn’t let you light up the S-Video button, that’s okay. It’s probably just warming up. Give

it some time, and then hit it again.)

You should have a projected image identical to your monitor

desktop. If not, see “Troubleshooting.”

Troubleshooting

On any blank spot on your computer desktop, right-click with your mouse. In the small menu that appears, go to “Properties.”

• Go to “Settings.”

• Click “Advanced.”

• Click “Displays.”

• You will see a red button over the “TV” icon. Click this, making it green.

The computer will ask you if you wish to keep the new settings.

Answer “yes.”

The projector should now show the same images as your computer

monitor.