View
227
Download
1
Category
Preview:
Citation preview
• Seedbed preparation
• Strong frame and headstock
• Tines
• Quick tines change
• Depth control
• Side deflectors
• Accord Hitch/PTO transfer shaft
• Track eradicators
• Track marker arm holders
• Large rollers range
• Road signs
• Technical data
• Main arguments
Access – Content
Access – Strong frame and headstock
• Strong power harrow headstock able to carry heavy drills with high hopper capacity like I-Drill (not compatible with CX Ultra), s-drill & s-drill pro, DA, DF, Optima, m-drill and m-drill pro
• Compact frame for a good integration of heavy drills with lower lifting capacity required
• 3 point linkage Cat II and Cat III
Straight tine 45x10 mm:
• Strong 45x10 mm straight tine for all conditions (light to heavy)
• Can be staggered on 2 or 3 rows• Avoid to bring wet clods on top• The average tine spacing is 150 mm (more
details in technical data)
Access – 2 types of tines
Levelling tine 45x10 mm:
• Strong 45x10 mm levelling tine for light conditions and residues
• Can be staggered only on 2 rows• For fast seedbed preparation• The average tine spacing is 150 mm (more
details in technical data)
• Strong 45x10 mm straight tine for all conditions (light to heavy)
• 2 rows of tines : the distance between the 2 rows is 200 mm
• 3 rows of tines : the distance between the first and the second row is 336 mm for a good material flow
• The average tine spacing is 150 mm (more details in technical data)
• Working depth up to 15 cm
Access – 2 or 3 rows of tines
336 mm 200 mm
• 3 rows of tines : the 1rst row is bolted in front of the frame. It is easy to add this additional row when the machine is equipped with 2 rows
• The tine supports are bolted to avoid any weaknesses on the main frame
Access – 2 or 3 rows of tines
• Good access for changing tine tips : the tines are fitted on a tine support that can be easily removed in few minutes for safe maintenance operations
Kverneland exclusivity – Tine quick change
• The tine support is only bolted by 2 bolts on one side. A cone and an anti-rotation stop are blocking the tines support in the middle
• For changing tips, the laterals deflectors must be removed (2 pins)
Kverneland exclusivity – Tine quick change
• Remove the lateral tine
• Remove the 2 bolts of the tines support
• Take away the tines support
Kverneland exclusivity – Tine quick change
• Safe and good Access to all maintenance operations : Tips can be changed on the workbench. It is not necessary to go underneath the machine
(dangerous and uncomfortable) Easy Access to the worn nut of the tips with a grinder (on the workbench).
• The customer can have a another set of tines in order to save maintenance time during the seeding season
• Roller is controlling the depth control• Easy and friendly adjustment• 2 different possibilities depending of the seeding coulter bars
Access – Depth control
Standard roller arms for combination with
precision seeders, mechanical drill carried by
hydraulic lift or mounted drill without coulter
bar connection onto the roller frame
Parallelogram in combination with i-drill or s-drill pro for a fix coulter bar position whatever the depth is.
Access – Side deflectors
• Mounted on a parallelogram to follow
ground curves
• Long deflector plate for a good soil
guidance and in order to avoid ridges
• The parallelogram is made with high
quality steel to allow flexibility with stones
• The deflectors are hold by 2 pin and
can be removed in few second to get
access to the tines
Accord hitch
• Same “A” triangle as power harrows which
is adapted to Access frame in order to fit all
Accord drills (with long parallelogram)
Straight levelling bar
• Adaptable with 2 rows of tines• Mechanical depth adjustment by pins• Spring loaded safety system• Combinable with track eradicators• Angle adjustment available
Clod Board levelling bar
• Adaptable with 2 rows of tines• For active crumbling effect • Hydraulic depth adjustment • Combinable with track eradicators• Agressivity can be adjusted
PTO transfer shaft
• The intermediate transfer shaft is available as an option• This kit includes the tractor PTO shaft, the transfer shaft
and supports
• The Access receives the Hydrolift
from the power harrow• Lifting capacity is 1,6 tones• It can carry high capacity drills
Hydrolift
Access – Track eradicators
Rigid track eradicators with shear bolt protection
• Track-eradicators are fitted on the main frame
• With 3 rows of tines, they are fitted in the line of the tine located at that place on the first row
Access – Track markers arm holders
I-Drill track marker arms can be fitted on the Access frame with the track marker holders for:- Better track marker stability,- Less strain on the coulter bar- Lower required lifting capacity
For a safe transport, the Access can be equipped with road signs- Front ones (2 units)- Lateral one and rear ones (4 units)
Access – Large roller offer
• Cage roller 550 mm or reinforced cage roller ø550mm (not compatible with I-Drill) – 10 bars
• Packer roller 500 mm & 585 mm
• Flexline roller 585 mm
Access – Heavy Actipack roller
Actipack roller ø 560mm
•The knives are cutting bigger clods coming in the disc spacing of 12,5cm leaving a ready seedbed
• Knives pressure can beadjustable as high as thedisc pressure to the groundto make equal pressurethrough the working width,and can also be put in a nonworking position to leave arough ground surface.
• Heat treated discs for better resistance.• Skid and knives between discs cleaning even in wet and sticky conditions (option)• Shaft diameter: 50 mm
Access – Technical dataWorking width (m) 3.00 3,5 4.00Maximum HP 180 200 220
Tine spacing with 2 rows of straight tines 162 155 163Number of tines 18 22 24Tine spacing with 2 rows of straight tines 302 296 289Number of tines 18 22 26Tine spacing with 3 rows 162 155 150Number of tines 20 22 26Front box sectionRear box sectionpacker roller Ø 500 mm 961 1054 1159packer roller Ø 585 mm 1088 1197 1319cage roller Ø 550 mm 810 882 963Flexline roller Ø 585 mm 1191 1316 1453Actipack roller Ø 560 mm with knifes 1186 1321 1533
Roller attachment
Seed drill combination possible
Accord triangle, Hydrolift, track- eradicators, PTO transfer shaft, track marker holders, CrossboardI-drill (w/o CX Ultra), DF- 1, s-drill, DA, m-drill/ m-drill Pro, Optima, Optima HD
Straight or leveling tine 45 x 10 mmStandard arms or parallelogramm for Pro connection
Type of tines
Accessories
2 rows
3 rows
frame
Weight (kg) für Access 3
rows
100 x60 x 6 mm120 x 80 x 8 mm
• 2 or 3 rows (straight tines) of tines• Levelling or straight tines• 3.00 to 4,00 m rigid• Quick tines change support for easy and safe
maintenance• Strong, light and compact (easy to lift)• Combination with all
Accord drills (except i-drill with CX ultra coulters)
• Perfectly adapted for operation in light to medium soil.• Can match with all heavy rollers in KV range• Large roller offer• With little wear and high output performance, the Access is a real alternative
Access – Main arguments
See ourMachines at workon YouTube
www.kverneland.com
visit us at www.kvernelandgroup.com
The Future of Farming
Recommended