View
1
Download
0
Category
Preview:
Citation preview
FlüssigkeitsteileLiquid ends
Version A3, B, C, DEdelstahlausführung mit Einzelstopfbuchsen.Stainless steel with single stuffing boxes.
Klarwasserausführung.Clear water model.
Heisswasserausführung.Hot water model.
Ventilanhebung zur Entwässerung (A3).Valve-lift for drainage (A3).
Saugventilauslösung zur verschleißfreien Last-, Leer-laufumschaltung optional.Optional suction valve release for wear free load, unload change over.
AntriebDrive
KD 719Ohne integriertes Getriebe.Without integral gear.
KD 719 GMit integriertem Getriebe.With integral gear.
KD 719 HAnflanschfläche für Kupplungslaterne am Getriebe- gehäuse.Surface mounting at gear box for coupling housing.
TriebwerkPower endsMit integrierter Kreuzkopfabdichtung (Standard).With integrated crosshead sealing (standard).
Triebwerkskühler entsprechend Einsatzbedingungen.Power end cooler subject to field of application.
BauweiseDesignLinks- oder Rechtsaus-führung.Left or right hand drive.
links/left rechts/right
Liegende Ausführung.In horizontal design.
Hochdruck Plungerpumpe
P max. 110 kW
Die robuste Pumpe KD 719 ist in unterschiedli-chen Antriebs- und Flüssigkeitsteil-Varianten erhältlich. Konzipiert für dünnflüssige Medien. Haupt-Einsatzgebiete in Industrie und Dienst-leistung: Entzunderung
Industrielle Hochdruckreinigung Sonderanwendungen
High pressure reciprocating plunger pump
P max. 110 kW
The sturdy pump type KD 719 is available in various drive and liquid end configurations. Designed for low viscous liquids. Main applica-tions in industry and service sector: Descaling
Industrial high pressure cleaningSpecial applications
KD 719
121 Corporate Lane. | New Bern, NC, 28562 | USA Toll Free. 1-800-217-8677 | Tel. 1-252-631-7188 Web. www.chemacinc.com | Email. Chemac@chemacinc.com
AntriebsdrehzahlDrive speed min
-1 1000 1200 1500 1800 2100 2200
GetriebeübersetzungGear ratio
i Getr.i gear
3,89 3,32 2,62 3,89 3,32 2,62 3,89 3,32 2,62 3,89 3,32 3,89 3,89
PumpendrehzahlPump speed min
-1 257 301 382 308 362 459 385 452 574 462 542 539 565
VersionVersion
DruckPressurebar
PlungerPlungerØ mm
Förderstrom AntriebsleistungCapacity l/min (±2%) Power required kW (+3%)
A 3 170 60150
46,517655
22369
18056
21166
26883
22570
26482
335104
27084
31798
31598
330102
200 55125
45,514754
18668
15055
17664
22381
18768
22080
279102
22582
26496
26296
275100
240 50102
44,512052
15266
12254
14463
18280
15367
18079
228100
18480
21694
21494
22498
300 458144
9552
12166
9753
11462
14579
12166
14378
18199
14680
17193
17093
17897
380 4062
42,57350
9264
7451
8760
11176
9364
10975
13895
11177
13190
13090
13694
420 354635
5441
6852
5542
6449
8262
6952
8161
10278
8263
9774
9673
10177
420 3237
28,543,5
335542
44,534
5240
6651
5642,5
6550
8363
6751
7860
7859
8262
420 2827,5
2132
24,540,5
313325
38,529,5
4937
4131,5
4836,5
6146,5
4937,5
5844
5744
6046
B 500 3549,5
455853
7467
5954
7063
8980
7467
8779
111100
8981
10595
10494
10999
600 324144
4852
6166
4953
5762
7379
6166
7278
9199
7379
8693
8693
9097
800 2830,543,5
35,551
4565
36,552
42,561
5478
45,565
5377
6897
5578
6492
6491
6796
850 2524
36,528
42,535,5
5428,543,5
33,551
42,565
35,554
4264
5381
4365
5077
5076
5280
850 2218,2 28
21,5 32,5
27 41,5
22 33,5
25,5 39
32,5 49,5
27,5 41,5
32 49
40,5 62
33 50
38,5 59
38,5 58
40 61
C 800 2831,545
3753
4767
3854
44,564
5681
4768
5580
70101
5781
6696
6695
69100
1000 2524,5
4428,5
5136,5
6529,5
5334,5
6243,5
7836,5
664377
5598
4479
5292
5192
5496
1200 2218,439,5
21,546
27,558
2247
2655
3370
27,559
32,569
4188
3371
3983
38,582
40,586
D 1500 1913,937
16,343
20,555
16,744
19,652
2566
2155
24,565
2566
2000 1710,837,5
12,644
1656
12,945
15,253
19,267
16,256
1966
2484
19,468
2379
22,579
23,583
2500 158,336
9,842
12,453
1043
11,750
14,964
12,554
14,763
1564
2800 158,239
9,646
12,258
9,847
11,555
14,670
12,359
14,469
14,770
URACA KD 719
Weitere technische Spezifikationen siehe Seite 4.
Technische Daten
l/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkWl/minkW
See page 4 for further technical specification.
Technical Data
1 bar = 14,5038 psi; 1 l = 0,26417 USGPM = 0,22 IPGPM; 1 kW = 1,3410 HP; 1 mm = 0,03937 inch
Sales & Service: 1-800-217-8677
www.chemacinc.com
KD 719 G Version A3
Version CVersion B
KD719
Version D
Auflagefläche / Floor space
KD 718 H
URACA KD 719
Abmessungen1 Maß abhängig von Ausführung.D DruckanschlußS SauganschlußM Manometeranschluß
Dimensions
1 Dimensions depending on design.D Pressure connectionS Suction connectionM Pressure gauge connection
710
132
(D)
105
G2 (S)
142
G ½ (M)
440
G ½ (M)
470
8232
130
114
710 105
G 2 (S)
(D)
705 143
(D)
G 1 (S)
8510
83235
460
400
180Ø 80 h6
140
250
227
425
440
80
G ½ (M)
Ø 46 h6146
145
19
285
171 667 133
(D)
G 2½ (S)
8298
158
2121
A 329057
8068
20 40
170
70
170
18105
200 320180 300
205
410
/ deep
Ø 4
6 h
6
Ø 14
6 g8
Ø 5
0
8xM12/18tief
DIN332-DM16
685
Ø 130± 0,2
Sales & Service: 1-800-217-8677
www.chemacinc.com
AusführungDesign
Gewicht (kg)Weight (kg)
Gewicht (lbs)Weight (lbs)
KD 719 Version A3 375 830
KD 719 G Version A3 400 880
KD 719 Version B/C 365 810
KD 719 G Version B/C 390 860
KD 719 Version D 355 780
KD 719 G Version D 380 840
URACA GmbH & Co. KG ■ Sirchinger Str. 15 ■ 72574 Bad Urach ■ GermanyTel. +49 (0) 7125/133-0 ■ Fax +49 (0) 7125/133-202 ■ info@uraca.de ■ www.uraca.de
Hub = 70 mm
Zulässige externe Antriebswellenbelastung auf Anfrage.
Die angegebenen Förderströme und Antriebsleistungen gel-ten für Wasser, volumetrische und mechanische Wirkungs-grade sind dabei berücksichtigt.
Ausführung des Flüssigkeitsteils abhängig von Fördermedi-um und Einsatzbedingungen.
Andere Betriebsdaten und detaillierte Abmessungen auf Anfrage.
Leistungsdaten für intermittierenden Betrieb; Daten für Dauereinsatz auf Anfrage.
Konstruktionsbedingt sind Drehzahleinschränkungen bei verschiedenen Druckstufen notwendig.
Erforderliche Zulaufdrücke sind abhängig von Einsatzbedin-gungen und Pumpenausführung.
Saug- und Druckanschlüsse sowie Antrieb wahlweise links oder rechts möglich.
Gewichte
Technische Spezifikationen
Konstruktionsänderungen vorbehalten. Maße, Gewichte, Abbildungen und Daten unverbindlich.
Gewichtsangaben ohne Öl, Abweichungen bedingt durch verschiedene Optionen möglich.
Stroke = 70 mm
Admissible external shaft loads upon request.
Capacity and recommended motor ratings as mentioned apply to water, the average volumetric and mechanical ef-ficiency are taken into consideration.
Liquid end design depends on liquid handled and operation conditions.
Other operating data and detailed dimensions are available on request.
Data are for intermittent operation. Data for continuous operation are available on request.
Speed limitation at different pressure stages is due to design.
The required suction pressure depends on application and pump design.
Suction and discharge connections are available on either side. If required, drive shaft may be supplied on opposite side.
Weights
Technical Specification
Weight without oil, differences are subject to different options.
KD
719.
de 11
.13
UR
ACA
Design may be subject to modification. Dimensions, weights, illustrations and technical data are without engagement.
Sales & Service: 1-800-217-8677
www.chemacinc.com
Recommended