Julian Bowen Limited Lincoln Bunk Bed 90cm · WARNING: High beds and the upper bed of bunk beds are...

Julian Bowen Limited

LincolnBunk Bed 90cm

Assembly Instructions

IMPORTANT - READ CAREFULLY - RETAINFOR FUTURE REFERENCE

Version 141202

03

HARDWARE

PARTS

1 01

1 01

1 03

1 02

1 04

1 05

1 05

1 06

1 06

1 07

1 07

1 08

1 09

1

1

10

10

1

1

10

10

1 10

1 11

1 11

1 12 12x

1 11

1 11

1 12 12x

A

4x

B

8x

C

8x

D

6x

E

28x

J

2x

F

70x

G

4x

H

4x

I

1x

L

2x

04

102,1cm

201,4cm

148,0

cm

3

cords,

and belts attached to or hung on this product.

The largest size of the mattress recommended is: 190 X 91 X 22 cm

Children could strangle themselves with articles, such as ropes, strings,

WARNING: High beds and the upper bed of bunk beds are not suitable for children

under six years due to the risk of injury through falls.

exceed 75 mm or shall be more than 230 mm.

WARNING: Children can become trapped between the bed and the wall. To avoid risk

of serious injury the distance between the top safety barrier and the wall shall not

This bunk bed has been tested to ensure compliance with BS EN 747: 2012 Parts 1&2.

This bunk bed is not designed to be split for use as 2 single beds.

1

05

B

28x

BBBB

BBBB

BB

BB

BB2x

2x

2x

1 04

1 05

1 06

1 07BB

BB

1 05

3

06

2

CD

C

D

C

C

D

D

EE

E

E

04x

C

I

D

04

05

06

06

03

02

4x

E

I

C

C

C

C

D

D

D

D

1 04

1 05

1 01

1 01

4x

C

I

D

FF

FFF

FF

FF

FF

FF

FF

1 12 11X J

FF

FF

F

FF

FF

FFF

F 1 12 11X

J

4F

2x

F

F 1 12

84,5cm

98,5cm

J

F

F

26x

5

111

111

07

Attach the centre slat first by pushing the siderails together so that the slat is flush against theside rail, before inserting the screws.

Next attach the remaining slats.Place the slats onto the side rail supports anddistribute evenly by using the spacer provided.

F

11

6

08

7 FF

FF

FF

FF

FF

1 12 11X

JF

F

F

1 11

1 11

F

F

F

2x

84,5cm

98,5cm

1 12

1 12

FF

FF

FF

FF

FF

FF J

1 11

1 11

F

J

F

F

26x

Attach the centre slat first by pushing the siderails together so that the slat is flush against theside rail, before inserting the screws.

Next attach the remaining slats.Place the slats onto the side rail supports anddistribute evenly by using the spacer provided.

F

11

8

09

F

F

F

F

F

F

AF

F 4x

8x

10

10

GH

GH

GH

GH

GH

4x

9

09

08

10

10

6x

FF

F

F

F

10

F

F

11

11

L

L

E

E

2x

E

I

L

1 07

1 07

2x

WARNINGTHE MATTRESSSURFACE MUST NOTBE ABOVE THIS LINE

12

General Care

Recommendations

Periodical re-tightening of fixings.

Warning

This unit is heavy. Please use an assistant when lifting.

Notes

Wipe clean with a slightly damp soft cloth.

Avoid the use of all household cleaners and abrasives.

When moving your furniture, carefully lift into place.

Never drag or push the pieces across the oor as this

will cause damage to the joints and could result in failure

to the product that will invalidate the warranty.

We’ve tried to make this piece of furniture as easy to

assemble as possible. .

In the unlikely event that you have problems putting

it together or have damaged or missing pieces, please

contact our customer services on 01623 727374.

Julian Bowen LimitedBentinck House, Park Lane Business Park, Kirkby-in-Ashfield,

Notts, NG17 9LE - www.julian-bowen.co.uk