View
544
Download
1
Category
Preview:
DESCRIPTION
Screws catalogue, where can be found the different models we produce and distribute over the world.
Citation preview
IPEX | 1
IPEX
PRODUCT CATALOGUEJanuary 2008
Ipex develops, produces and distributes fastening systems for the roof, wall and façade industry.
This catalogue contains an extremely varied programme of fastening materials for roof, wall and façade assembly and other applications.
Ipex is looking forward to supply you with advice, technical support and the right fasteners for your assembly activities.
You can always contact our sales department. Tel. Nr.: +31 (0) 547-384 635.
IPEX Europe B.V.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 2
Colour-Fix
IPEX COLOUR-FIX
Colour-Fix is the internal powdercoating department of Ipex. The department allows us to make fastening materials in practically any colour. Colour-Fix increases the aesthetic value of fasteners and offers additional protection as well.
Ipex has more than 600 colours on stock. We can supply almost any other colour, including the Metallics. “Customized colours” are also possible.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 3
Innovation
IPEX INNOVATION
Innovation and development of new products and/or improvements of existing products within our organization are performed in close cooperation with our customers. Ipex regularly consults its customers to get feedback on the applica-tion of existing products and is very receptive to customers' require-ments. Where possible, we will look for or develop a specific solution in consultation with our client.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 4
Material
MATERIAL SPECIFICATIONS
AB F44 Aluminium
BD Aluminium / SteelBE Aluminium / Stainless steel A2BF Stainless steel A2 / Stainless steel A2BI Stainless steel A2 with a steel drill pointBJ Aluminium / AluminiumBK SS copper-platedBL Galvanized steel / EPDMBM Stainless steel / EPDMBN Aluminium / EPDMBO Copper-plated / EPDM
CF Hardened steel C1022
SA Stainless steel A2SB Stainless steel A4SBR Stainless steel A4 RuspertSK Stainless steel A2 copper-platedSM Stainless steel Marutex 305SN Stainless steel 410
RA EPDM GreyRB EPDM BlackRC Silicone Red
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 5
METAL PRESERVATION
• StainlessSteelThere are more than 200 different types of stainless steel, and they all contain at least 12% chromium (Cr) as alloying element. Martensiticstainlesssteel, This type contains a large quantity of carbon, which makes it very hard. Applications can be found in cutting equipment and surgical knives. Austeniticstainlesssteel This type contains a large amount of chromium and nickel. Together they must take up more than 26% of the alloy. It is tough, but also easy to deform. Disadvantage of this type is that great tensions can occur in the material after mechanical treatment and heat injection through welding. This type of stainless steel is often used in the construction of machines, because of its relatively good welding characteristics.
• GALVANIZINGAt this moment, zinc coatings are applied most, to give protection against corrosion of iron and steel that is subjected to atmospheric circumstances. As zinc is less noble than steel, it will first sacrifice itself in case of corrosion. The degree in which metal is galvanized, is expressed in layer thickness, MU. Fastening materials can be supplied with a zinc layer of 3 MU up to 25 MU. Ipex aims to provide as many fastening materials as possible with 20 MU.
• COPPER-PLATINGCopper-plating means that you cover the metal with a layer of copper. This is usually done to increase the aesthetic value of the item.
• RUSPERTRuspert is a special surface coating, consisting of a zinc-aluminium al-loy, which (amongst other things) makes sure that in case of BI-metal, the steel drill point is protected against corrosion. Moreover, this coating lubricates the thread of the stainless steel when screwing in.
Pres-erva-tion
PreservationPreservation
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 6
Approvals
APPROVALS
German national Approval - Zulassung des Deutschen Institutes für Bautechnik in Berlin.
European Technical Approvals.
Recognition by the industry association of insurers for sprinkler systems, Cologne, Germany.
Fire resistance tested (DIN 4102-2), fire resistance class F30, F60, F90 and F120.
Member of IFBS, Düsseldorf, Germany.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 7
Content
RoofingandCladding. . . . . . . . . . . . . . . . . . . . . . . . . 9* Drillmate 11* Flangemate 19* Trusshead 25* Sidingscrews 30
Industry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33* Rivets - Colour Rivets 35* Rivets 36* Wingdrill screws 39* Drill screws 7504 40
Woodconstruction . . . . . . . . . . . . . . . . . . . . . . . . . . 45* Chipboard screws 47* Decking screws 50* Selfdrilling wood screws 51* Spengler screws 53
Anchoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55* Autoclaved aerated and concrete screws 57* Heavy anchoring 59* Chemical anchoring 68* Light anchoring 74* Insolation anchoring 76
Sealants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79* Sealing washers 81* Storm Washers 83* Pipe flashings 84* Sealants and glues 87
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89* Various items 91
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
Roofing and claddingwww. i p e x - g roup . c om
IPEX | 11
0310
0312
A
B
A
B
4.8 x 19 2 mm 2 x 1.2 mm
5.5 x 22 3 mm 2 x 1.2 mm
6.3 x 22 3 mm 2 x 1.2 mm
8.0 x 25 6 mm 2 x 1.2 mm
4.8 = 5/165.5 = 5/166.3 = 5/16
4.2 = 1/45.5 = 5/16
4.2 x 13 1 mm 0.9 - 2.5 mm
4.2 x 16 4 mm 0.9 - 2.5 mm
4.2 x 19 7 mm 0.9 - 2.5 mm
4.2 x 25 13 mm 0.9 - 2.5 mm
4.2 x 32 20 mm 0.9 - 2.5 mm
5.5 x 19 1 mm 1.0 - 3.5 mm
5.5 x 25 5 mm 1.0 - 3.5 mm
5.5 x 32 12 mm 1.0 - 3.5 mm
5.5 x 38 18 mm 1.0 - 3.5 mm
Size A B
Roofing and Cladding
Size A B
Application
Application
BI = Bi-metal A2 - CF = Galvanized steel - AB = Aluminium
DrillmateHexagon head drill screw, with reduced drill point and an optional washer.
DrillmateHexagon head drill screw, with drill point no. 2 and an optional washer.
BI = Bi-metal A2 - CF = Galvanized steel - SM = SS Marutex - SN = SS 410
l Provided with approval (ETA panding 2008)l Approval on request.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l l
l l
l l
l l l l
l l l l
l l l l
l l l
l l
l l l
l l l l
l l l
l l l l
BI CF AB
BI CF SM SN
IPEX | 12
A
B
0313
4.8 = 5/165.5 = 5/166.3 = 3/88.0 = 13mm
4.8 x 16 1 mm 1.0 - 4.5 mm
4.8 x 19 1 mm 1.0 - 4.5 mm
4.8 x 25 3 mm 1.0 - 4.5 mm
4.8 x 32 11 mm 1.0 - 4.5 mm
4.8 x 38 17 mm 1.0 - 4.5 mm
5.5 x 19 1 mm 1.2 - 6.0 mm
5.5 x 25 2 mm 1.2 - 6.0 mm
5.5 x 32 15 mm 1.2 - 6.0 mm
5.5 x 38 23 mm 1.2 - 6.0 mm
5.5 x 50 27 mm 1.2 - 6.0 mm
5.5 x 64 41 mm 1.2 - 6.0 mm
5.5 x 75 52 mm 1.2 - 6.0 mm
6.3 x 19 1 mm 1.5 - 6.3 mm
6.3 x 25 2 mm 1.5 - 6.3 mm
6.3 x 32 15 mm 1.5 - 6.3 mm
6.3 x 38 23 mm 1.5 - 6.3 mm
6.3 x 50 27 mm 1.5 - 6.3 mm
6.3 x 64 41 mm 1.5 - 6.3 mm
6.3 x 74 51 mm 1.5 - 6.3 mm
8.0 x 40 7 mm 2.0 - 6.3 mm
Size A B
Application
BI = Bi-metal A2 - CF = Zinc plated steel
Roofing and Cladding
DrillmateHexagon head drill screw, with drill point no. 3 and an optional washer.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
BI CF
IPEX | 13
0315
0311
A B
B
5.5 = 5/166.3 = 3/88.0 = 13 mm
LWF
4.8 = 5/165.5 = 5/16
4.8 x 28 2 x 1.25 mm
4.8 x 35 2 x 1.25 mm
4.8 x 50 2 x 1.25 mm
4.8 x 60 2 x 1.25 mm
4.8 x 80 2 x 1.25 mm
5.5 x 35 2 x 1.25 mm
5.5 x 40 LWF 1 mm 4.0 - 12.5 mm
5.5 x 51 11 mm 4.0 - 12.5 mm
5.5 x 62 LWF 22 mm 4.0 - 12.5 mm
5.5 x 76 36 mm 4.0 - 12.5 mm
5.5 x 102 62 mm 4.0 - 12.5 mm
6.3 x 40 1 mm 4.0 - 12.5 mm
8.0 x 40 1 mm 4.0 - 12.5 mm
Size B
Size A B
Application
Application
BI = Bi-metal A2 - CF = Zinc plated steel
Roofing and CladdingBI = Bi-metal A2 - CF = Galvanized steel
DrillmateHexagon head drill screw, with drill point no. 5 and an optional washer.
DrillmateHexagon head drill screw, with reduced drill point and an optional washer.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l
BI CF
BI CF
IPEX | 14
0319
0336
A
B
B
6.5 = 5/16
5.5 = 5/16
5.5-6.3 x 75 40 mm 2 x 1.2 mm
5.5-6.3 x 95 60 mm 2 x 1.2 mm
6.5 x 38 LWF 1.0 - 2.0 mm
6.5 x 50 LWF 1.0 - 2.0 mm
6.5 x 65 LWF 1.0 - 2.0 mm
DrillmateHexagon head drill screw, with reduced drill point and an optional washer.
DrillmateHexagon head drill screw, with drill point no. 2 and an optional washer.
BI = Bi-metal A2 - CF = Galvanized steel
Size A B
Size A B
Roofing and Cladding
Applications
Applications
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
l l
l l
l l
BI CF
BI CF
IPEX | 15
0322
0323
A
B
B
A
5.5 = 5/16
5.5 = 5/16
5.5-6.3 x 67 25 - 43 1.2 - 6.0 mm
5.5-6.3 x 87 35 - 63 1.2 - 6.0 mm
5.5-6.3 x 107 45 - 83 1.2 - 6.0 mm
5.5-6.3 x 127 65 - 103 1.2 - 6.0 mm
5.5-6.3 x 147 85 - 123 1.2 - 6.0 mm
5.5-6.3 x 157 95 - 133 1.2 - 6.0 mm
5.5-6.3 x 167 105 - 143 1.2 - 6.0 mm
5.5-6.3 x 177 115 - 153 1.2 - 6.0 mm
5.5-6.3 x 187 125 - 163 1.2 - 6.0 mm
5.5-6.3 x 207 145 - 183 1.2 - 6.0 mm
5.5-6.3 x 227 165 - 203 1.2 - 6.0 mm
5.5-6.3 x 65 25 - 43 1.0 - 3.5 mm
5.5-6.3 x 85 35 - 63 1.0 - 3.5 mm
5.5-6.3 x 110 50 - 88 1.0 - 3.5 mm
5.5-6.3 x 130 70 - 108 1.0 - 3.5 mm
5.5-6.3 x 150 90 - 128 1.0 - 3.5 mm
5.5-6.3 x 170 110 - 148 1.0 - 3.5 mm
5.5-6.3 x 200 140 - 178 1.0 - 3.5 mm
5.5-6.3 x 225 165 - 203 1.0 - 3.5 mm
BI = Bi-metal A2 - CF = Galvanized steel
Roofing and Cladding
DrillmateHexagon head drill screw, with drill point no. 2 and an optional washer.
DrillmateHexagon head drill screw, with drill point no. 3 and an optional washer.
BI = Bi-metal A2 - CF = Galvanized steel
Size A B
Size A B
Applications
Applications
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
l l
l l
l l
l
l
l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
BI CF
BI CF
IPEX | 16
0325
0321
A
B
B
5.5 = 5/16
6.5 = 5/16
6.5-7.0 x 80 1.0 - 2.0 mm
6.5-7.0 x 85 1.0 - 2.0 mm
6.5-7.0 x 102 1.0 - 2.0 mm
6.5-7.0 x 122 1.0 - 2.0 mm
6.5-7.0 x 142 1.0 - 2.0 mm
6.5-7.0 x 150 1.0 - 2.0 mm
6.5-7.0 x 162 1.0 - 2.0 mm
6.5-7.0 x 175 1.0 - 2.0 mm
6.5-7.0 x 202 1.0 - 2.0 mm
6.5-7.0 x 222 1.0 - 2.0 mm
5.5-6.3 x 76 25 - 40 mm 4.0-12.5 mm
5.5-6.3 x 80 35 - 40 mm 4.0-12.5 mm
5.5-6.3 x 100 40 - 60 mm 4.0-12.5 mm
5.5-6.3 x 120 55 - 80 mm 4.0-12.5 mm
5.5-6.3 x 125 60 - 85 mm 4.0-12.5 mm
5.5-6.3 x 140 75 - 100 mm 4.0-12.5 mm
5.5-6.3 x 152 87 - 112 mm 4.0-12.5 mm
5.5-6.3 x 162 97 - 122 mm 4.0-12.5 mm
5.5-6.3 x 190 120 - 150 mm 4.0-12.5 mm
5.5-6.3 x 210 140 - 170 mm 4.0-12.5 mm
5.5-6.3 x 215 145 - 175 mm 4.0-12.5 mm
5.5-6.3 x 240 170 - 200 mm 4.0-12.5 mm
BI = Bi-metal A2 - CF = Galvanized steel
Roofing and Cladding
DrillmateHexagon head drill screw, with drill point no. 5 and an optional washer.
DrillmateHexagon head drill screw, with reduced drill point and an optional washer.
BI = Bi-metal A2 - CF = Galvanized steel
SIZE A B
SIZE B
Applications
Applications
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l l
l
l l
l l
l l
l l
l l
BI CF
BI CF
IPEX | 17
0333
0335
A
B
A
B
6.3 = 5/16
6.3 = 5/16
6.3 x 110 27 - 62 mm 5.0-12.0 mm
6.3 x 120 37 - 72 mm 5.0-12.0 mm
6.3 x 130 47 - 82 mm 5.0-12.0 mm
6.3 x 150 67 - 102 mm 5.0-12.0 mm
6.3 x 160 77 - 112 mm 5.0-12.0 mm
6.3 x 180 97 - 132 mm 5.0-12.0 mm
6.3 x 200 117 - 152 mm 5.0-12.0 mm
6.3 x 235 152 - 187 mm 5.0-12.0 mm
6.3 x 105 34 - 69 mm 1.5 - 6.0 mm
6.3 x 110 39 - 74 mm 1.5 - 6.0 mm
6.3 x 125 54 - 89 mm 1.5 - 6.0 mm
6.3 x 145 74 - 109 mm 1.5 - 6.0 mm
6.3 x 155 84 - 119 mm 1.5 - 6.0 mm
6.3 x 175 104- 139 mm 1.5 - 6.0 mm
6.3 x 195 124- 159 mm 1.5 - 6.0 mm
6.3 x 230 155- 194 mm 1.5 - 6.0 mm
BI = Bi-metal A2 - CF = Galvanized steel
Roofing and Cladding
DrillmateHexagon head drill screw, with drill point no. 3 and a BAZ washer.
DrillmateHexagon head drill screw, with drill point no. 5 and a BAZ washer.
CF = Galvanized steel
SIZE A B
SIZE A B
Applications
Applications
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
l l
l l
l l
l l
l l l l
l l
l l
l l
BI CF
CF
IPEX | 18
0331
0360
A
B
6.5 = 5/16
6.0 = 5/16
6.5 x 105
6.5 x 110
6.5 x 125
6.5 x 145
6.5 x 155
6.5 x 175
6.5 x 195
6.5 x 230
6.0 x 35 0 - 10 mm 0.63 - 1.5 mm
SA = Stainless steel A2
Roofing and Cladding
DrillmateHexagon head drill screw, with drill point no. 2 and a BAZ washer.
DrillmateHexagon head drill screw, with reduced drill point.
BI = Bi-metal A2
SIZE
SIZE A B
Applications
Applications
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
l
SA
BI
IPEX | 19
0389
0367
A
A
B
B
6.3 = 5/16
5.5 = 5/16
5.5 x 25 10 mm 1.0 - 3.0 mm
5.5 x 35 * 20 mm 1.0 - 3.0 mm
6.3 x 22 6 mm 2 x 1.2 mm
CF = Galvanized steel
Roofing and Cladding
FlangemateHexagon head drill screw, with reduced drill point and an integrated washer.
FlangemateHexagon head drill screw, with drill point no. 2 and an integrated washer.
CF = Galvanized steel
SIZE A B
SIZE A B
Applications
Applications
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
CF
CF
IPEX | 20
0368
0369
A
B
A
B
5.5 = 5/16
6.3 = 5/16
4.8 x 25 0 - 14 mm 1.2 - 4.5 mm
5.5 x 25 0 - 10 mm 1.2 - 5.0 mm
5.5 x 38 0 - 4 mm 4.0 - 13 mm
CF = Galvanized steel
Roofing and Cladding
FlangemateHexagon head drill screw, with drill point no. 3 and an integrated washer.
FlangemateHexagon head drill screw, with drill point no. 5 and an integrated washer.
CF = Galvanized steel
Applications
Applications
SIZE A B
SIZE A B
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
CF
CF
IPEX | 21
0337
A
B
5.5 = 5/16
5.5-6.3 x 75 40 mm 2 x 1.2 mm
5.5-6.3 x 95 60 mm 2 x 1.2 mm
CF = Galvanized steel
Roofing and Cladding
FlangemateHexagon head drill screw, with drill point no. 2 and an integrated washer.
Applications
SIZE A B
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
lCF
IPEX | 22
0370
0371
A
B
A
B
6.3 = 5/16
6.3 = 5/16
5.5-6.3 x 76 25 - 45 4.0 - 13.0 mm
5.5-6.3 x 100 40 - 70 4.0 - 13.0 mm
5.5-6.3 x 120 45 - 80 4.0 - 13.0 mm
5.5-6.3 x 150 75 - 115 4.0 - 13.0 mm
5.5-6.3 x 190 115 - 155 4.0 - 13.0 mm
5.5-6.3 x 85 40-70 mm 1.0 - 3.0 mm
5.5-6.3 x 100 55-85 mm 1.0 - 3.0 mm
5.5-6.3 x 125 75-110 mm 1.0 - 3.0 mm
5.5-6.3 x 155 75-140 mm 1.0 - 3.0 mm
CF = Galvanized steel
Roofing and Cladding
FlangemateHexagon head drill screw, with drill point no. 2 and an integrated washer.
FlangemateHexagon head drill screw, with drill point no. 5 and an integrated washer.
CF = Galvanized steel
Applications
Applications
SIZE A B
SIZE A B
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
CF
CF
l
l
l
l
l
IPEX | 23
0377
B
6.5 = 3/8
6.5 x 16 0.5 - 2.0 mm
6.5 x 19 0.5 - 2.0 mm
6.5 x 25 0.5 - 2.0 mm
6.5 x 32 0.5 - 2.0 mm
6.5 x 38 0.5 - 2.0 mm
6.5 x 45 0.5 - 2.0 mm
6.5 x 50 0.5 - 2.0 mm
6.5 x 64 0.5 - 2.0 mm
6.5 x 75 0.5 - 2.0 mm
6.5 x 90 0.5 - 2.0 mm
6.5 x 100 0.5 - 2.0 mm
6.5 x 115 0.5 - 2.0 mm
6.5 x 125 0.5 - 2.0 mm
6.5 x 150 0.5 - 2.0 mm
6.5 x 175 0.5 - 2.0 mm
6.5 x 200 0.5 - 2.0 mm
6.5 x 220 0.5 - 2.0 mm
6.5 x 240 0.5 - 2.0 mm
6.5 x 260 0.5 - 2.0 mm
Tappingscrew-TypeAHexagon head self-tapping screw with an optional washer.
CF = Galvanized steel - SA = Stainless steel A2
Roofing and Cladding
Applications
SIZE B
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
CF SA AB
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
IPEX | 24
0378
B
6.3 = 3/8
6.3 x 16 > 1.5 mm
6.3 x 19 > 1.5 mm
6.3 x 25 > 1.5 mm
6.3 x 32 > 1.5 mm
6.3 x 38 > 1.5 mm
6.3 x 45 > 1.5 mm
6.3 x 50 > 1.5 mm
6.3 x 64 > 1.5 mm
6.3 x 75 > 1.5 mm
6.3 x 90 > 1.5 mm
6.3 x 100 > 1.5 mm
6.3 x 115 > 1.5 mm
6.3 x 125 > 1.5 mm
6.3 x 150 > 1.5 mm
6.3 x 175 > 1.5 mm
6.3 x 200 > 1.5 mm
6.3 x 220 > 1.5 mm
6.3 x 240 > 1.5 mm
6.3 x 260 > 1.5 mm
CF = Galvanized steel - SA = Stainless steel A2
Roofing and Cladding
Tappingscrew-TypeBHexagon head self-tapping screw with an optional washer. Applications
Applications
SIZE B
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
CF SA
IPEX | 25
0300
A
B
A
B
0302
4.8 x 20 2 mm 2 x 1.25 mm
5.5 x 25 6 mm 2 x 1.25 mm
6.3 x 22 3 mm 2 x 1.25 mm
4.8 x 25 6.5 mm 1.0 - 3.5 mm
4.8 x 38 18.5 mm 1.0 - 3.5 mm
5.5 x 25 6.5 mm 1.0 - 3.5 mm
4.8 = TX 205.5 = TX 256.3 = TX 25
4.8 = TX 205.5 = TX 25
BI = Bi-metal A2 - CF = Galvanized steel
Roofing and Cladding
TrussheadTrusshead drill screw, with reduced drill point and an optional washer.
TrussheadTrusshead drill screw, with drill point no. 2 and an optional washer.
BI = Bi-metal A2
Applications
Applications
SIZE A B
SIZE A B
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
l l
l l
l l
l l
BI CF
BI CF
IPEX | 26
0303
0305
A
B
A
B
5.5 = TX 25
5.5 = TX 25
5.5 x 25 3 mm 1.2 - 6.0 mm
5.5 x 40 1 mm 4.0 - 12.5 mm
BI = Bi-metal A2 - CF = Galvanized steel
Roofing and Cladding
TrussheadTrusshead drill screw, with drill point no. 2 and an integrated washer.
TrussheadTrusshead drill screw, with drill point no. 3 and an integrated washer.
BI = Bi-metal A2 - CF = Galvanized steel
Applications
Applications
SIZE A B
SIZE A B
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
BI CF
BI CF
IPEX | 27
0301
A
B
0390
B
4.8 = TX 205.5 = TX 25
4.8 x 28 2 x 1.25
4.8 x 35 2 x 1.25
5.5 x 35 2 x 1.25
4.2 x 32 2 x 1.25 mm
4.2 = SQDR Nr. 2
BI = Bi-metal A2 - CF = Galvanized steel
Roofing and Cladding
TrussheadTrusshead drill screw, with reduced drill point no. 5 and an integrated washer.
TrussheadTrusshead drill screw, with reduced drill point and an integrated washer.
BI = Bi-metal A2 - CF = Galvanized steel
Applications
Applications
SIZE B
SIZE B
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l Provided with approval (ETA panding 2008)l Approval on request.
l l
l l
l
l
BI CF
SM
IPEX | 28
0363
0364
4.8 = TX 205.5 = TX 25
4.8 = TX 25
4.8 x 20 ****
4.8 x 25
4.8 x 32
4.8 x 38
4.8 x 45
4.8 x 55
4.8 x 25
4.8 x 32
4.8 x 38
4.8 x 45
4.8 x 60
5.5 x 38
SA = Stainless steel A2 - SB = Stainless steel A4
Roofing and Cladding
TrussheadTrusshead drill screw, with reduced drill point and an optional washer.
TrussheadTrusshead drill screw, with drill point no. 2 and an optional washer.
BI = Bi-metal A2 - CF = Galvanized steel
Applications
Applications
SIZE
SIZE
**** Fully threaded
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l l
l
l
l l
l
l l
l l
l l
l l
l l
SA SB
SA SB
IPEX | 29
0365
0388
4.8 = TX 20
4.5 = TX 20
4.8 x 40
4.5 x 35
Roofing and Cladding
TrussheadTrusshead drill screw, with reduced drill point and an optional washer.
TrussheadTrusshead drill screw, with drill point no. 2.
BI = Bi-metal A2 - CF = Galvanized steel
BI = Bi-metal A2 - CF = Galvanized steel
Applications
Applications
SIZE
SIZE
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
lSA
SA SB
IPEX | 30
0345
0346
4.2 x 45
4.5 x 45
4.2 x 32
4.5 = TX 20
4.2 = SQDR Nr. 2
SidingscrewSelfdrilling flatheaded woodscrew.
Size
SidingscrewSelfdrilling flatheaded screw.
Size
Application
Application
SA = Stainless steel A2
BI = Bi-metal A2 - SM = Stainless steel Marutex
Roofing and Cladding
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l l
SA
BI SM
IPEX | 31
0347
0381
4.2 = SQDR Nr. 2
2.5 x 30
2.5 x 40
2.5 x 50
2.8 x 32
4.2 x 50
Colour-Nail®Coloured nail for the assembly of plates on wood.
Size
SidingscrewPan head selfdrilling woodscrew.
Size
Application
Application
SA = Stainless steel A2
Roofing and Cladding
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
BI = Bi-metal A2 - CF = Galvanized steel
lSA
l l
l l
l l
l l
SA SB
Industrywww. i p e x - g roup . c om
IPEX | 35
0105
0106
A
A
4.8 x 18 LWF 5.0 - 14.0 mm
4.0 x 10 1.0 - 6.0 mm
4.0 x 12 1.0 - 6.0 mm
4.8 x 12 5.0 - 8.0 mm
4.8 x 15 8.0 - 11.0 mm
4.8 x 18 10.0 - 14.0 mm
4.8 x 20 12.0 - 16.0 mm
4.8 x 24 14.0 - 20.0 mm
Colour-Rivet®Rivets with powderpainted rivet body
Colour-Rivet®Rivets with powderpainted rivet body with a large head.
Size A
Size A
Application
Application
IndustryBE = Alu / Stainless A2 - BF = Stainless A2 / Stainless A2
BE = Alu / Stainless A2 - BF = Stainless A2 / Stainless A2
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
BE BF
l
l l
l
l l
l
l
l
l lBE BF
IPEX | 36
0109
0110
A
A
3.0 x 6 1.0 - 4.0 mm
3.0 x 10 2.5 - 7.0 mm
4.0 x 10 1.5 - 6.5 mm
4.0 x 15 5.5 - 11.0 mm
4.0 x 18 9.5 - 14.5 mm
4.8 x 10 1.0 - 6.0 mm
4.8 x 12 2.0 - 8.0 mm
4.8 x 15 5.0 - 11.5 mm
4.8 x 18 8.0 - 14.0 mm
4.8 x 24 12.0 - 20.0 mm
4.0 x 10 1.5 - 6.5 mm
4.0 x 15 5.5 - 11.0 mm
4.0 x 18 9.5 - 14.5 mm
4.8 x 10 1.0 - 6.0 mm
4.8 x 12 2.0 - 8.0 mm
4.8 x 15 5.0 - 11.5 mm
4.8 x 18 8.0 - 14.0 mm
4.8 x 22 12.0 - 20.0 mm
4.8 x 25 15.0 - 20.0 mm
4.8 x 30 20.0 - 25.0 mm
4.8 x 35 25.0 - 30.0 mm
Rivets-MultigripMultigrip Rivets.
Rivets-MultigripMultigrip Rivets with a large head.
Size A
Application
Application
BE = Alu / Stainless A2 - BD = Alu /Zinc plated Steel - BF = Stainless A2 / Stainless A2
BE = Alu / Stainless A2 - BD = Alu /Zinc plated steel - BF = Stainless A2 / Stainless A2
Industry
Size A
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l
l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
BE BD BF
BE BD BF
IPEX | 37
0111
0112
A
A
3.0 x 6 1.0 - 4.0 mm
3.0 x 10 2.5 - 7.0 mm
4.0 x 10 1.5 - 6.5 mm
4.0 x 15 5.5 - 11.0 mm
4.0 x 18 9.5 - 14.5 mm
4.8 x 10 1.0 - 6.0 mm
4.8 x 12 2.0 - 8.0 mm
4.8 x 15 5.0 - 11.5 mm
4.8 x 18 8.0 - 14.0 mm
4.8 x 24 12.0 - 20.0 mm
3.2 x 8 0.5 - 1.0 mm
3.0 x 10 1.0 - 3.0 mm
4.0 x 10 1.5 - 5.0 mm
4.0 x 12 4.0 - 6.5 mm
4.0 x 16 8.0 - 11.0 mm
4.0 x 18 10.0 - 13.0 mm
4.8 x 10 0.5 - 4.0 mm
4.8 x 12 2.0 - 6.0 mm
4.8 x 16 6.0 - 10.0 mm
4.8 x 18 8.0 - 12.0 mm
4.8 x 20 10.0 - 14.0 mm
4.8 x 24 15.0 - 18.0 mm
4.8 x 30 19.0 - 24.0 mm
Rivets-MultigripMultigrip Rivets - flat head.
Rivets-peel
Application
Application
Size A
Size A
BE = Alu / Stainless A2 - BD = Alu /Zinc plated Steel
BD = Alu /Zinc plated steel
Industry
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
l
l
l
l
l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
BD
BE BD
IPEX | 38
0113
A
0121
A
3.2 x 6.5 0.5 - 2.0 mm
3.2 x 8.0 2.0 - 3.5 mm
4.0 x 8 0.5 - 3.5 mm
4.0 x 10 5.5 - 6.0 mm
4.0 x 12 6.5 - 8.0 mm
4.0 x 14 8.0 - 10.0 mm
4.8 x 8 1.0 - 3.0 mm
4.8 x 10 3.0 - 5.0 mm
4.8 x 12 5.5 - 7.5 mm
4.8 x 14 7.5 - 9.0 mm
4.8 x 18 11.0 - 13.0 mm
5.2 x 17.5 0.5 - 4.8 mm
5.2 x 19.1 1.5 - 6.4 mm
5.2 x 22.2 4.8 - 9.5 mm
5.2 x 25.4 7.9 - 12.7 mm
5.2 x 28.6 11.1 - 15.9 mm
5.2 x 31.8 14.3 - 19.1 mm
Rivets-Gas-andwaterproofSealed rivets.
Size A
Rivets-TrebolPan head rivet with an EPDM sealing washer.
Size A
Application
Application
BE = Alu / Stainless A2 - BD = Alu /Zinc plated Steel - BF = Stainless A2 / Stainless A2
BJ = Alu / Alu
Industry
l Provided with approval, Zulassung
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l l
l l
l l l
l l l
l l l
l l l
l l l
l l l
l l
l l
l l
BE BD BF
BJ
IPEX | 39
0361
0362
A
A
B
B
4.8 = TX 255.5 = TX 256.3 = TX 30
5.5 = TX 25
5.5 x 60 10 - 25 mm 4.0 - 10.0 mm
5.5 x 85 15 - 50 mm 4.0 - 10.0 mm
5.5 x 109 40 - 75 mm 4.0 - 10.0 mm
4.8 x 38 5 - 20 mm 1.3 - 4.5 mm
4.8 x 50 5 - 32 mm 1.3 - 4.5 mm
5.5 x 50 5 - 32 mm 1.3 - 6.0 mm
5.5 x 85 25 - 60 mm 1.3 - 6.0 mm
5.5 x 109 25 - 84 mm 1.3 - 6.0 mm
6.3 x 63 10 - 40 mm 2.0 - 6.0 mm
SelfdrillingwingscrewDrillscrew with wings.
SelfdrillingwingscrewDrillscrew with wings.
Size A B
Size A B
Application
Application
CF = Zinc plated steel
BI = Bi-metal A2 - CF = Zinc plated steel - SN = Stainless steel 410
Industry
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l
l l l
l l l
l l l
l l l
l
l
l
BI CF SN
CF
IPEX | 40
0348
0373
03733.9 = SQDR 1 4.2 = SQDR 24.8 = SQDR 25.5 = SQDR 36.3 = SQDR 3
03503.9 = TX 15 4.2 = TX 204.8 = TX 205.5 = TX 256.3 = TX 25
0348 3.9 = 1/44.2 = 1/44.8 = 5/165.5 = 5/166.3 = 3/8
0349 3.9 = 7 mm4.2 = 7 mm4.8 = 8 mm5.5 = 8 mm6.3 = 10 mm
3.5 3.9 4.2 4.8 5.5 6.3
9,5 l l l
13 l l l l l l l l l l
16 l l l l l l l l l l l l l
19 l l l l l l l l l l l l
22 l l l l l l l l l l l l
25 l l l l l l l l l l l
32 l l l l l l l l l l
38 l l l l l l l
45 l l l l l l
50 l l l l l
60 l l l
70 l l l
80 l l
3.5 3.9 4.2 4.8 5.5 6.3
9,5 l
13 l l l l l l l
16 l l l l l l l l
19 l l l l l l l
22 l l l l l l l
25 l l l l l l l
32 l l l l l l
38 l l l l l
45 l l l l
50 l l l l
60 l l
70 l l
80 l l
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
DIN7504DrillscrewDrillscrew with Hexagan head.
DIN7504DrillscrewDrillscrew with pan head.
Application
Application
CF = Zinc plated steel - SA = Stainless steel A2 - SM = Stainless Marutex
CF = Zinc plated steel - SA = Stainless steel A2 - SM = Stainless Marutex
Industry
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 41
0380
03803.9 = SQDR 1 4.2 = SQDR 24.8 = SQDR 25.5 = SQDR 36.3 = SQDR 3
03513.9 = TX 15 4.2 = TX 204.8 = TX 205.5 = TX 256.3 = TX 25
3.5 3.9 4.2 4.8 5.5 6.3
9,5 l
13 l l
16 l l l l l l
19 l l l l l l l
22 l l l l l l l
25 l l l l l l l
32 l l l l l l l l
38 l l l l l l l
45 l l l l l
50 l l l l l
60 l l l
70 l l
80 l l
CF
SA
SM
CF
SA
CF
SA
SM
CF
SA
SM
CF
SA
SM
CF
SA
SM
SM
DIN7504DrillscrewDrillscrew with a countersunk head. Application
CF = Zinc plated steel - SA = Stainless steel A2 - SM = Stainless Marutex
Industry
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 42
0386
0379
0386 3.9 = 1/44.2 = 1/44.8 = 5/165.5 = 5/166.3 = 3/8
03733.9 = TX 154.2 = TX 204.8 = TX 205.5 = TX 256.3 = TX 25
3.5 3.9 4.2 4.8 5.5 6.3 8.0
9,5 l l l l l l l l l l
13 l l l l l l l l l l l l
16 l l l l l l l l l l l l l l
19 l l l l l l l l l l l l l l
22 l l l l l l l l l l l l l
25 l l l l l l l l l l l l l
32 l l l l l l l l l l l l
38 l l l l l l l l l l l l
45 l l l l l l l l l l l
50 l l l l l l l l l l l l
60 l l l l l l l l l
70 l l l
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
3.5 3.9 4.2 4.8 5.5 6.3
9,5 l l l l
13 l l l l l l l l l l
16 l l l l l l l l l l l l l l l l
19 l l l l l l l l l l l l l l l l
22 l l l l l l l l l l l l l l l l
25 l l l l l l l l l l l l l l l l
32 l l l l l l l l l l l l l l l l
38 l l l l l l l l l l l l l l l l
45 l l l l l l l l l l l l l l l l
50 l l l l l l l l l l l l l
60 l l l l l l l l l l l
70 l l l l
80 l l
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
TappingscrewSelf tapping plate screw with a Hexagan head.
TappingscrewSelf tapping platescrew with a pan head. Application
Application
CF = Zinc plated Steel - SA = Stainless steel A2
CF = Zinc plated steel - SA = Stainless steel A2 - SB = Stainless steel A4
Industry
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 43
0385
0384
03853.9 = TX 15 4.2 = TX 204.8 = TX 205.5 = TX 256.3 = TX 25
03743.9 = TX 154.2 = TX 204.8 = TX 205.5 = TX 256.3 = TX 25
3.5 3.9 4.2 4.8 5.5 6.3
9,5 l l l l
13 l l l l l l l l l l l
16 l l l l l l l l l l l l l l l
19 l l l l l l l l l l l l l l l
22 l l l l l l l l l l l l
25 l l l l l l l l l l l l l l l
32 l l l l l l l l l l l l l l
38 l l l l l l l l l l l l l l
45 l l l l l l l l l l l l
50 l l l l l l l l l l l l
60 l l l l l l l l
70 l l l l
80 l l l l
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
3.5 3.9 4.2 4.8 5.5 6.3
9,5 l l l l l l l
13 l l l l l l l l l l l l l
16 l l l l l l l l l l l l l l l l l l
19 l l l l l l l l l l l l l l l l l l
22 l l l l l l l l l l l l l l l l l l
25 l l l l l l l l l l l l l l l l l l
32 l l l l l l l l l l l l l l l l l l
38 l l l l l l l l l l l l l l l l l l
45 l l l l l l l l l l l l l l l l l
50 l l l l l l l l l l l l l l l l l
60 l l l l l l l l l l l l l l l
70 l l l l l l l l
80 l l l
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
CF
SA
SB
Application
ApplicationTappingscrewSelf tapping platescrew with a countersunk head
TappingscrewSelftapping platescrew with a raised countersunk head.
CF = Zinc plated Steel - SA = Stainless steel A2 - SB = Stainless steel A4
CF = Zinc plated steel - SA = Stainless steel A2 - SB = Stainless steel A4
Industry
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 44
0374
03744.8 = #45.5 = #56.3 = #5
3.5 3.9 4.2 4.8 5.5 6.3
9,5
13 l l l l l
16 l l l l l l
19 l l l l l l
22 l l l l l l
25 l l l l l l
32 l l l l l l
38 l l l l l l
45 l l l l l l
50 l l l l l l
60 l l l l l
70 l l l l l
80 l l l
90 l l l
l
SA
SB
SA
SB
SA
SB
SA
SB
SA
SB
SA
SB
TappingscrewSelf tapping platescrew with a cylindrical head. Application
SA = Stainless steel A2 - SB = Stainless steel A4
Industry
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
Woodconstructionwww. i p e x - g roup . c om
IPEX | 47
0391
3.0 = TX 103.5 = TX 154.0 = TX 204.5 = TX 205.0 = TX 256.0 = TX 308.0 = TX 30 10 = TX 40
3.0 3.5 4.0 4.5 5.0 6.0 8.0 10.0
12 l l l l l l l
15 l l l l l l l l
20 l l l l l l l l l l l
25 l l l l l l l l l l l
30 l l l l l l l l l l l
35 l l l l l l l l l l l l
40 l l l l l l l l l l l l l l
45 l l l l l l l l l l l l l l
50 l l l l l l l l l l l l l
60 l l l l l l l l l l l l
70 l l l l l l l l l l l l
80 l l l l l l
90 l l l l l
100 l l l l l l
110 l l l l l l
120 l l l l l l
140 l l l l
160 l l l l
180 l l l l
220 l l l l
220 l l l l
240 l l l l
260 l l l l
280 l l l l
300 l l l
320 l
340 l
360 l
380 l
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
SB
SB
SB
SB
SB
SB
SB
CF
SA
SB
Woodconstruction
Application
Application
ChipboardscrewFlatheaded chipboard screw particial threaded.
CF = Zinc plated steel - SA = Stainless steel A2 - SB = Stainless steel A4
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 48
3.0 = TX 103.5 = TX 154.0 = TX 204.5 = TX 205.0 = TX 256.0 = TX 30
3.0 3.5 4.0 4.5 5.0 6.0
12 l l l l
15 l l l l l l l l l l l l l
20 l l l l l l l l l l l l l l l
25 l l l l l l l l l l l l l l l
30 l l l l l l l l l l l l l l l l l
35 l l l l l l l l l l l l l l
40 l l l l l l l l l l l l l l
45 l l l l l l l l l l l l l
50 l l l l l l l l l l l l
60 l l l l l l l l l l l l
70 l l l l l l l l l l l l
80 l l l l l l l l
90 l l l l l l l l
100 l l l l l
110 l l l
120 l l l
140 l
160 l
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
SB
SB
SB
SB
SB
SB
0398ChipboardscrewPan head chipboard screw particial threaded.
CF = Zinc plated steel - SA = Stainless steel A2 - SB = Stainless steel A4
Woodconstruction
Application
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 49
0393
0399
3.0 = TX 103.5 = TX 154.0 = TX 204.5 = TX 205.0 = TX 256.0 = TX 30
3.0 = TX 103.5 = TX 154.0 = TX 204.5 = TX 205.0 = TX 256.0 = TX 30
3.0 3.5 4.0 4.5 5.0 6.0
12 l l l l
15 l l l l l l l l l l l l l
20 l l l l l l l l l l l l l l l
25 l l l l l l l l l l l l l l l
30 l l l l l l l l l l l l l l l l l
35 l l l l l l l l l l l l l l
40 l l l l l l l l l l l l l l
45 l l l l l l l l l l l l l
50 l l l l l l l l l l l
60 l l l l l l l l l
70 l l l l l l l l l
80 l l l l l l
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
SB
SB
SB
SB
SB
SB
3.0 3.5 4.0 4.5 5.0 6.0
12 l l l l
15 l l l l l l l l l l l l
20 l l l l l l l l l l l l l
25 l l l l l l l l l l l l l
30 l l l l l l l l l l l l l l
35 l l l l l l l l l l l
40 l l l l l l l l l l l
45 l l l l l l l l l l
50 l l l l l l l l
60 l l l l l l l l
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
SB
SB
SB
SB
SB
SB
ChipboardscrewFlat head chipboard screw fully threaded.
ChipboardscrewPan head chipboard screw fully threaded.
Application
Application
WoodconstructionCF = Zinc plated steel - SA = Stainless steel A2 - SB = Stainless steel A4
CF = Zinc plated steel - SA = Stainless steel A2 - SB = Stainless steel A4
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 50
0375
0376
3.0 = TX 103.5 = TX 154.0 = TX 204.5 = TX 205.0 = TX 256.0 = TX 30
3.0 = TX 103.5 = TX 154.0 = TX 204.5 = TX 205.0 = TX 256.0 = TX 30
4.0 4.5 5.0 6.0
30 l l
35 l l l l
40 l l l l l
50 l l l l l l
60 l l l l l l
70 l l l l l l
80 l l l l l l l
90 l l
100 l
120 l
140 l
160 l
CF
SA
CF
SA
CF
SA
CF
SA
4.0 4.5 5.0 6.0
35 l
40 l l
45 l l
50 l l l l
60 l l l l l
70 l l
80 l l
90 l
100 l l
SB
SB
SB
SB
SBR
ChipboardscrewDrillscrew with a ribbed flat head.
DeckingscrewSelfdrilling woodscrew with ribs under the head for the fastening of hardwood floor decking.
Application
Application
CF = Zinc plated steel - SA = Stainless steel A2
SB = Stainless steel A4 - SBR = Stainless steel A4 Ruspert
Woodconstruction
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 51
0400
3.5 = TX 204.0 = TX 204.5 = TX 205.0 = TX 256.0 = TX 308.0 = TX 40 10 = TX 40
3.5 4.0 4.5 5.0 6.0 8.0 10.0
30 l l l l l l l l
40 l l l l l l l l l
45 l l l l l l l l l
50 l l l l l l l l
60 l l l l l l l l
70 l l l l l l l l
80 l l l l l l
90 l l l l
100 l l l l l l l
110 l l l l l l l
120 l l l l l l l
140 l l l l l l
160 l l l l l l
180 l l l l l l
220 l l l l l l
220 l l l l l l
240 l l l l l l
260 l l l l l l
280 l l l l l l
300 l l l l l
320 l l l
340 l l l
360 l l l
380 l l l
400 l l
420 l
440 l
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
CF
SA
SB
SB
SB
SB
SB
SB
SB
WoodscrewWoodscrew for woodconstructions. Application
CF = Zinc plated steel - SA = Stainless steel A2 - SB = Stainless steel A4
Woodconstruction
l Provided with approval, Zulassung
Z-9.1-626 Z-9.1-630 Z-9.1-661
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 52
6.0 = TX 308.0 = TX 40 10 = TX 40
6.0 8.0 10.0
80 l l l
90 l l l
100 l l l l
120 l l l l
140 l l l l
160 l l l l
180 l l l l
220 l l l l
220 l l l l
240 l l l l
260 l l l l
280 l l l l
300 l l l l
320 l l l
340 l l l
360 l l l
380 l l l
400 l l l
420 l
440 l
460 l
CF
SA
CF
SA
CF
SA
0402WoodscrewWoodscrew for woodconstructions.
CF = Zinc plated steel - SA = Stainless steel A2
l Provided with approval, Zulassung
Z-9.1-626 Z-9.1-630 Z-9.1-661
Woodconstruction
Application
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 53
0366
0404
4.5 = TX 20
4.5 = PZ 2
4.5
20 l l
25 l l
30 l l
35 l l
40 l l
45 l l
50 l l
55 l l
60 l l
65 l l
80 l l
90 l l
100 l l
120 l l
150 l l
SA
SK
4.5
20 l l
25 l l
30 l l
35 l l
40 l l
45 l l
50 l l
55 l l
60 l l
65 l l
80 l l
90 l l
100 l l
120 l l
150 l l
SA
SK
Spenglerscrew
Woodscrew liseko head with an optional liseko washer. Application
ApplicationSpenglerscrew
Woodscrew liseko head with an optional liseko washer.
SA = Stainless steel A2 - SK = Stainless steel A2 copper
SA = Stainless steel A2 - SK = Stainless steel A2 copper
Woodconstruction
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
Anchoringwww. i p e x - g roup . c om
IPEX | 57
0339
0341
0340
10.0 = SW 13
8 x 110 80 mm
10 x 110 110 mm
10 x 110 110 mm
10 x 160 160 mm
10 x 110 110 mm
10 x 160 100 mm
8.0 = TX 2510.0 = TX 30
10.0 = TX 30
TSM-PBautocleavedaeratedconcretescrewSelf tapping screw for autocleaved aerated concrete.
Size Fixturethickness
Application
AnchoringCF = Zinc plated steel
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
CF
IPEX | 58
0342
0344
0343
6.0 = SW 138.0 = SW 1610.0 = SW 18
5 x 40 5
6 x 60 6
6 x 80 6
6 x 90 6
5 x 50 5
6 x 60 6
6 x 80 6
6 x 90 6
6 x 60 6
8 x 80 8
8 x 90 8
8 x 100 8
8 x 120 8
8 x 220 8
10 x 65 10
10 x 90 10
10 x 95 10
10 x 100 10
10 x 105 10
10 x 110 10
10 x 115 10
6.0 = TX 256.0 = TX 30
6.0 = TX 256.0 = TX 30
TSMConcretescrewScrewanchor for cracked and non-cracked concrete.
Size Predrill
Application
AnchoringCF = Zinc plated steel - SB = Stainless steel A4
l Provided with approval, Zulassung
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
CF SB
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l l
l
l l
l
l l
IPEX | 59
0405
M-6 7 5 35 100
M-6 7 10 55 100
M-6 7 15 55 100
M-6 7 25 55 100
M-6 7 30 55 100
M-6 7 40 55 100
M-8 9 5 45 100
M-8 9 10 50 100
M-8 9 10 65 100
M-8 9 15 65 100
M-8 9 25 65 100
M-8 9 35 65 100
M-8 9 45 65 100
M-8 9 55 65 100
M-10 12 10 50 50
M-10 12 10 70 50
M-10 12 15 70 50
M-10 12 20 70 50
M-10 12 45 70 50
M-10 12 70 70 50
M-10 12 100 70 50
M-10 12 140 70 25
A B C D E
MKT BWedge anchor zinc plated throughbolt for load bearing in non-cracked concrete.
Application
A = Thread
B = Drillhole diameter in fixture
C = Fixture thickness
D = Setting depth
E = Quantity
AnchoringCF = Zinc plated steel - SB = Stainless steel A4
l Provided with approval ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l
l l
l l
l
l l
l l
l l
l l
l l
l l
l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
CF SB
IPEX | 60
0405
M-12 14 5 65 25
M-12 14 10 80 25
M-12 14 10 90 25
M-12 14 15 90 25
M-12 14 30 90 25
M-12 14 50 90 25
M-12 14 85 90 25
M-12 14 125 90 25
M-12 14 145 90 20
M-12 14 190 90 20
M-12 14 230 90 20
M-16 18 5 75 20
M-16 18 15 90 20
M-16 18 10 110 20
M-16 18 30 110 20
M-16 18 60 110 20
M-16 18 80 110 10
M-16 18 100 110 10
M-20 22 10 100 10
M-20 22 5 130 10
M-20 22 20 130 10
M-20 22 35 130 10
M-20 22 60 130 10
M-20 22 95 130 10
MKT BWedge anchor zinc plated throughbolt for load bearing in non-cracked concrete.
A B C D E
Application
A = Thread
B = Drillhole diameter in fixture
C = Fixture thickness
D = Setting depth
E = Quantity
AnchoringCF = Zinc plated steel - SB = Stainless steel A4
l Provided with approval ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l
l
l l
l l
l l
l l
l
l
l
l
l l
l l
l l
l l
l l
l l
l
l
l l
l
l l
l l
l l
CF SB
IPEX | 61
0406
M-8 9 10 60 100
M-8 9 10 60 100
M-8 9 30 60 100
M-8 9 50 60 100
M-8 9 100 60 50
M-10 12 10 75 50
M-10 12 15 75 50
M-10 12 20 75 50
M-10 12 30 75 50
M-10 12 50 75 50
M-10 12 75 75 50
M-12 14 15 90 25
M-12 14 20 90 25
M-12 14 30 90 25
M-12 14 50 90 25
M-12 14 65 90 25
M-12 14 85 90 25
M-12 14 105 90 25
M-12 14 125 90 25
M-12 14 145 90 20
M-12 14 160 90 20
MKTBZPLUSWedge anchor zinc plated throughbolt for load bearing in non-cracked concrete.
A B C D E
A = Thread
B = Drillhole diameter in fixture
C = Fixture thickness
D = Setting depth
E = Quantity
Application
AnchoringCF = Zinc plated steel - SB = Stainless steel A4
l Provided with approval, ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l
l l
l l
l
l l
l l
l
l l
l l
l
l l
l l
l l
l l
l
l l
l
l l
l
l
CF SB
IPEX | 62
0406
M-16 18 15 110 20
M-16 18 25 110 20
M-16 18 50 110 20
M-16 18 80 110 10
M-16 18 100 110 10
M-16 18 140 110 10
M-16 18 180 110 10
M-20 22 30 125 10
M-20 22 60 125 10
M-20 22 130 125 10
M-20 22 150 125 10
M-24 26 30 145 10
M-24 26 60 145 5
M-24 26 75 145 5
MKTBZPLUSWedge anchor zinc plated throughbolt for load bearing in cracked and non-cracked concrete.
A B C D E
A = Thread
B = Drillhole diameter in fixture
C = Fixture thickness
D = Setting depth
E = Quantity
Application
AnchoringCF = Zinc plated steel - SB = Stainless steel A4
l Provided with approval, ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
CF SB
l
l l
l l
l
l l
l
l
l l
l l
l l
l l
l
l
l
IPEX | 63
0407
M-6 10 12 10 65 50
M-6 10 12 30 65 50
M-6 10 12 50 65 50
M-6 10 12 100 65 25
M-8 12 14 0 80 50
M-8 12 14 10 80 50
M-8 12 14 30 80 50
M-8 12 14 50 80 25
M-8 12 14 100 80 25
M-10 15 17 0 95 25
M-10 15 17 15 95 25
M-10 15 17 25 95 25
M-10 15 17 45 95 25
M-10 15 17 95 95 25
M-12 18 20 0 105 20
M-12 18 20 10 105 20
M-12 18 20 20 105 20
M-12 18 20 40 105 20
M-12 18 20 70 105 20
M-12 18 20 100 105 10
M-16 24 26 0 130 10
M-16 24 26 20 130 10
M-16 24 26 50 130 10
M-16 24 26 100 130 5
M20 28 31 10 150 10
M20 28 31 30 150 10
M20 28 31 60 150 5
M20 28 31 100 150 5
MKTSZ-BHighload anchor for fast through fastening in cracked and non-cracked concrete.
A B C D E F
A = Thread
B = Drill diameter
C = Drillhole diameter in fixture
D = Clamping thickness
E = Setting depth
F = Quantity
Application
AnchoringCF = Zinc plated steel
l Provided with approval, ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
CF
IPEX | 64
0408
M-6 10 12 0 65 100
M-6 10 12 10 65 50
M-6 10 12 30 65 50
M-6 10 12 50 65 50
M-8 12 14 0 80 50
M-8 12 14 10 80 50
M-8 12 14 30 80 50
M-8 12 14 50 80 25
M-10 15 17 0 95 25
M-10 15 17 15 95 25
M-10 15 17 25 95 25
M-10 15 17 45 95 25
M-10 15 17 95 95 25
M-12 18 20 0 105 20
M-12 18 20 10 105 20
M-12 18 20 20 105 20
M-12 18 20 40 105 20
M-12 18 20 70 105 20
M-16 24 26 0 130 10
M-16 24 26 20 130 10
M-16 24 26 50 130 10
MKTSZ-SHighload anchor for fast through fastening in cracked and non-cracked concrete.
A B C D E F
Application
Anchoring
A = Thread
B = Drill diameter
C = Drillhole diameter in fixture
D = Clamping thickness
E = Setting depth
F = Quantity
CF = Zinc plated steel
l Provided with approval, ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
CF
IPEX | 65
0409
M-6 10 12 10 65 50
M-6 10 12 25 65 50
M-6 10 12 45 65 50
M-8 12 14 10 80 50
M-8 12 14 25 80 50
M-8 12 14 50 80 25
M-10 15 17 10 95 25
M-10 15 17 25 95 25
M-10 15 17 35 95 25
M-10 15 17 50 95 25
M-12 18 20 20 105 20
M-12 18 20 40 105 20
MKTSZ-SKHighload anchor for fast through fastening in cracked and non-cracked concrete.
A B C D E F
Application
Anchoring
A = Thread
B = Drill diameter
C = Drillhole diameter in fixture
D = Clamping thickness
E = Setting depth
F = Quantity
CF = Zinc plated steel
l Provided with approval, ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
l
l
l
l
CF
IPEX | 66
0410
M-6 10 12 10 60 50
M-6 10 12 25 60 50
M-6 10 12 50 60 50
M-8 12 14 10 70 50
M-8 12 14 25 70 50
M-8 12 14 50 70 25
M-10 14 16 10 85 25
M-10 14 16 25 85 25
M-10 14 16 50 85 25
M-12 18 20 15 100 20
M-12 18 20 25 100 20
M-12 18 20 40 100 20
M-16 24 26 25 125 10
M-16 24 26 50 125 10
M-20 28 31 30 150 5
M-20 28 31 60 150 5
MKT SL-BHighload anchor for through fastening in non-cracked concrete.
A B C D E F
Anchoring
Application
A = Thread
B = Drill hole diameter
C = Hole diameter in fixture
D = Clamping thickness
E = Setting depth
F = Quantity
SB = Stainless steel A4
l Provided with approval, Zulassung
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
SB
IPEX | 67
0411
M-6 10 12 10 60 50
M-6 10 12 25 60 50
M-6 10 12 50 60 50
M-8 12 14 10 70 50
M-8 12 14 25 70 50
M-8 12 14 50 70 25
M-10 14 16 10 85 25
M-10 14 16 25 85 25
M-10 14 16 50 85 25
M-12 18 20 15 100 20
M-12 18 20 25 100 20
M-12 18 20 40 100 20
M-16 24 26 25 125 10
M-16 24 26 50 125 10
M-20 28 31 30 150 5
M-20 28 31 60 150 5
MKT SL-SHighload anchor for through fastening in non-cracked concrete.
A B C D E F
Anchoring
A = Thread
B = Drill hole diameter
C = Hole diameter in fixture
D = Clamping thickness
E = Setting depth
F = Quantity
Application
SB = Stainless steel A4
l Provided with approval, Zulassung
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
SB
IPEX | 68
0412
l Allgemeine bauaufsichtliche Zulassung - ETA.
l Es liegt noch keine Zulassung vor.
M-8 10 110 80 10
M-8 10 150 80 10
M-10 12 115 90 10
M-10 12 130 90 10
M-10 12 165 90 10
M-10 12 190 90 10
M-12 14 135 110 10
M-12 14 160 110 10
M-12 14 180 110 10
M-12 14 210 110 10
M-12 14 220 110 10
M-12 14 250 110 10
M-12 14 300 110 10
M-14 16 170 120 10
M-16 18 150 125 10
M-16 18 165 125 10
M-16 18 190 125 10
M-16 18 210 125 10
M-16 18 230 125 10
M-16 18 250 125 10
M-16 18 300 125 10
M-20 25 220 170 10
M-20 25 220 170 10
M-20 25 220 170 10
M-24 28 220 210 5
M-24 28 260 210 5
M-24 28 300 210 5
M-30 35 380 280 5
MKT V-AThreaded stud for chemical glas capsule V-P, chemical anchorsytem for non-cracked concrete surfaces.
A B C D E
A = Thread
B = Drill diameter
C = Hole diameter in fixture
D = Setting depth
E = Quantity
Anchoring
Application
CF = Zinc plated steel - SB = Stainless steel A4
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l
l l
l
l
l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
CF SB
IPEX | 69
0413
0414
8 10 10
10 12 10
12 14 10
14 16 10
16 18 10
20 25 10
24 28 5
30 35 5
M-8
M-10
M-12
M-16
M-20
MKT VE-PChemical glas capsule VE-P for anchoring in non-cracked concrete.
A B C
MKTTool for fixing threaded studs.
TYPE
Anchoring
Application
Application
A = Diameter
B = Rebar diameter
C = Quantity
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 70
0425
M-8 10 80 55 10
M-8 10 95 55 10
M-8 10 110 55 10
M-10 12 85 65 10
M-10 12 95 65 10
M-10 12 105 65 10
M-10 12 135 65 10
M-10 12 175 65 10
M-12 14 110 85 10
M-12 14 125 85 10
M-12 14 150 85 10
M-12 14 200 85 10
M-12 14 225 85 10
M-12 14 265 85 10
M-12 14 145 105 10
M-12 14 180 105 10
M-12 14 220 105 10
M-16 18 180 130 10
M-16 18 210 130 10
M-16 18 250 130 10
M-16 18 315 130 10
M-20 24 230 180 5
M-20 24 255 180 5
M-20 24 305 180 5
M-24 26 290 215 5
M-24 26 340 215 5
A B C D E
MKTVMZ-AThreaded stud for chemical anchoring to be applied on cracked and non-cracked concrete.
A = Thread
B = Drill diameter
C = Length total
D = Setting depth
E = Quantity
Anchoring
Application
CF = Zinc plated steel - SB = Stainless steel A4
l Provided with approval ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
CF SB
IPEX | 71
0426
0439
VMZ 345 345 ml. 12
VMU 300 300 ml. 12
VMU 345 345 ml. 12
VM-X Mixer 1
MKTCartridge for VMZ-A threaded stud for fastening in cracked and non-cracked concrete.
Type Content Quantity
MKTCartridges for througbolt on non-cracked concrete.
Type Content Quantity
Anchoring
Application
Application
Provided with approval ETA
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 72
0427
0428
0429
VE-P10 10 13 85 10
VE-P12 12 15 110 10
VE-P16 14 18 130 10
VE-P16 16 20 140 10
VE-P20 20 24 185 10
VM-SH 12X50 12 60 M6-M8 10
VM-SH 16X85 16 95 M8-M12 10
VM-SH 16X130 16 140 M8-M12 10
VM-SH 20X85 20 95 M16 10
VM-IG M 6 10 40 12 X 50 10
VM-IG M 8 14 70 16 X 85 10
VM-IG M 10 16 70 20 X 85 10
VM-IG M 12 18 70 20 X 85 10
TYPE A B C D
MKT VE-PHammer-in Capsule VE-P to fasten anchor ribbed rebar.
A = Steeldiameter
B = Drill diameter
C = Setting depth
D = Quantity
MKTPerfo Sleeve VM-SH (plastic), for installation in hollow based material.
TYPE A B C D
A = Drillhole
B = Length total
C = For thread / Sleeve
D = Quantity
MKTInternal threaded sleeve VM-IG (Steel Zinc plated).
TYPE A B C D
Anchoring
Application
Application
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 73
0415
0416
0417
VM-P 345
VM-P 380 Standard
VM-P 380 Profi
STB-H 14
STB-H 18
STB-H 28
STB 35
ZU-AP
MKTQualitydispenserforcartridges
MKTCleaningbrushwithwoodenT-handle
MKTBlow-outPump
Type
Type
Type
Anchoring
Application
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 74
0430
0431
4.0 x 20 2.0 - 3.0
5.0 x 25 2.6 - 4.0
6.0 x 30 3.5 - 5.0
7.0 x 30 4.0 - 5.5
8.0 x 40 4.5 - 6.0
10.0 x 50 6.0 - 8.0
12.0 x 60 8.0 - 10.0
14.0 x 70 10.0 - 12.0
16.0 x 80 12.0 - 14.0
6.0 x 40 4.0 - 5.0
8.0 x 50 5.0 - 6.0
10.0 x 60 6.0 - 7.0
MegaplugPolyethylene mega anchor suitable for solid and hollow material. Temp. resistance: -40° C up to +70° C.
NylonplugNylon polyamide-6-anchor suitable for solid material.Temp. resistance: -40° C up to +70° C.
Size Screw
Size Screw
Application
Application
Anchoring
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 75
0432
5.0 x 25 5
5.0 x 30 10
5.0 x 35 15
5.0 x 40 20
5.0 x 50 30
5.0 x 60 40
6.0 x 25 1
6.0 x 30 5
6.0 x 35 10
6.0 x 40 15
6.0 x 50 25
6.0 x 60 35
6.0 x 80 55
6.0 x 100 75
8.0 x 50 10
8.0 x 60 20
8.0 x 80 40
8.0 x 100 60
8.0 x 120 80
8.0 x 140 100
SizeClampingthickness Nail
NailanchorNylon polyamide-6 nail anchor suitable for solid and hollow material. Temp. resistance: -40° C up to +70° C.
Application
CF = Zinc plated Steel - SA = Stainless steel A2
Anchoring
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
l l
SACF
IPEX | 76
0433
0434
8.0 x 60 30 - 40 90 45
8.0 x 80 50 - 60 90 45
8.0 x 100 70 - 80 90 45
8.0 x 120 90 - 100 90 45
8.0 x 140 110 - 120 90 45
8.0 x 160 130 - 140 90 xx
8.0 x 80 30 - 50 90 52
8.0 x 100 60 - 70 90 52
8.0 x 120 80 - 90 90 52
8.0 x 140 100 - 110 90 52
8.0 x 160 120 - 130 90 52
8.0 x 180 140 - 150 90 52
8.0 x 200 160 - 170 90 52
8.0 x 220 180 - 190 90 52
8.0 x 240 200 - 210 90 52
InsulationanchorPlastic insulation anchor suitable for solid material. Temp. resistance: -40° C up to +70° C.
Size Insulation Diameters
Size Insulation Diameters
Insulationanchor,two-parts Plastic plug and a plastic nail suitable for solid and hollow material. Temp. resistance: -40° C up to +70° C.
Application
Anchoring
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 77
0435
0436
8 x 90 60 60
8 x 110 80 60
8 x 130 100 60
8 x 150 120 60
8 x 170 140 60
8 x 190 160 60
8 x 210 180 60
8 x 240 210 60
10 x 70 40 60
10 x 90 60 60
10 x 110 80 60
10 x 130 100 60
10 x 150 120 60
10 x 180 150 60
10 x 210 180 60
10 x 240 210 60
Insulation-Universalanchor,two-partsPlastic plug and metal pin with plastic cover suitable for fixing in solid material. Temp. resistance: -40° C up to +70° C.
Size Insulation Diameter
Size Insulation Diameter
Insulation-Universalanchor,two-parts Plastic plug and metal pin with plastic cover suitable for fixing in solid and hollow material. Temp. resistance: -40° C up to +70° C.
Application
Anchoring
l Provided with approval ETAG 014
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l
l
l
l
l
l
l
l
IPEX | 78
0437
0438
5.0 x 30 5 - 7
6.0 x 32 7 - 9
8.0 x 38 10 - 12
8.0 x 60 10 - 12
10.0 x 60 12 - 14
5.0 x 26 6
6.0 x 30 5
6.0 x 40 10
6.0 x 50 20
6.0 x 60 30
6.0 x 80 50
6.0 x 100 70
UniversalmetalplugUniversal metal plug, zinc plated steel, suitable for solid and hollow material.
Size Drillhole
Size Clampingthickness
SpringAnchorZinc plated sleeve of spring loaded steel suitable for solid and hollow material.
Application
Application
Anchoring
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
Sealantswww. i p e x - g roup . c om
IPEX | 81
0101
0102
10 l l
12 l l l
14 l l l
16 l l l
19 l l l
22 l l l
25 l l
28 l l l
38 l l
45 l l
70 l l
BL
BM
BN
15 l l
20 l l
25 l l
BM
BO
SealingwasherSealing washer with high quality bonded EPDM.
LisekoWasherLiseko washer with high quality bonded EPDM. Application
Application
BL = Zinc plated steel / EPDM - BM = Stainless steel A2 / EPDM - BN = Aluminium / EPDM
Sealants
BM = Stainless steel A2 / EPDM - BO = Copper / EPDM
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 82
0123
0104
0124
M5 x 25 10 mm 14 mm
M5 x 35 10 mm 38 mm
6.3 x 22
12 l l l
14 l l l
16 l l l
19 l l l
25 l l l
32 l l l
MultisealSealing washer with high quality bonded EPDM. Protects and seals extra under the head.
SizeDiameterClamping
thickness
Size
EPDMNutEPDM Anchor with brass nut. Suitable for fixing on soft, hollow and solid material and as anchoring. Also offers a waterproof fixing.
BAZWasherEPDM bonded sealing washer with stainless steel presswasher for fixing on corrugated sheets.
Application
Application
Application
SealantsBL = Zinc plated steel / EPDM - BM = Stainless steel A2 / EPDM - BN = Aluminium / EPDM
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
BL
BM
BN
IPEX | 83
0125
0126
001 30 20 35°
002 30 24 31°
003 30 24 30°
004 30 20 23°
005 40 40 45°
006 32 40 34°
007 40 40 34°
008 32 34 23°
009 32 40 17°
010 30 25 27°
011 50 25 27°
012 30 23 30°
013 40 23 30°
014 32 40 24°
015 40 57 22°
016 45 54 32°
017 32 30 29°
018 40 48 40°
019 32 33 38°
020 40 26 40°
021 30 20 16°
001 ( 25 x 25 ) 24 25
002 ( 40 x 40 ) 24 40
003 48 45
004 43 40
StormwasherstrapeziumAluminium with bonded high quality EPDM or moss rubber sealing for crown-fixing of profiled sheets.
TYPE WIDTH TOP ANGLE
StormwashersforcorrugatedsheetsAluminium with bonded high quality EPDM or moss rubber sealing for crown-fixing of corrugated sheets.
DESCRIPTION RADIUS WIDTH
Application
Application
Sealants
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 84
0127
0128
01 120 06 - 60 06 - 50
02 160 50 - 80 50 - 75
03 195 06 - 110 06 - 100
04 235 75 - 150 75 - 125
05 275 110 - 170 110 - 145
06 325 140 - 210 140 - 175
07 370 150 - 265 150 - 215
08 420 175 - 310 175 - 255
09 650 255 - 475 255 - 415
11 160 20 - 70 20 - 60
12 275 50 - 190 50 - 160
13 370 85 - 255 85 - 215
Springseal®RoundbaseFlexible pipe flashing.
* For profiles up to 40 mm. deep
For roofgradients over 20º you have to choose the next mentioned size.
For the right diameter of square based pipe flashings please multiply the width with 1.3.
NO. BASE PIPE PIPE*
NO. BASE PIPE PIPE*
Springseal®-Zipseal®RoundbaseFlexible pipe flashing with zipper, especially designed for existing constructions.
* For profiles up to 40 mm. deep
For roofgradients over 20º you have to choose the next mentioned size.
For the right diameter of square based pipe flashings please multiply the width with 1.3.
Application
Application
SealantsRA = EPDM, Grey - RB = EPDM, Black - RC = Silicone, Red
RA = EPDM, Grey - RB = EPDM, Black - RC = Silicone, Red
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
l l l
RA RB RC
l l l
l l l
l l l
RA RB RC
IPEX | 85
0129
0130
1 71 x 81 0 - 35
01 100 x 110 0 - 55
02 152 x 167 3 - 100
03 264 x 290 80 - 175
04 381 x 419 150 - 315
05 516 x 593 250 - 400
06 623 x 716 355 - 550
01 210 X 230 3 - 115
Springseal®SquarebaseFlexible pipe flashing
Springseal®-Zipseal®SquarebaseFlexible pipe flashing with a zipper, especially designed for existing constructions.
** For roofgradients over 20º you have to choose the next mentioned size. *** For the right diameter of square based pipe flashings please multiply the width with 1.3.
NR. BASE PIPE
NO. BASE PIPE
Sealants
Application
Application
RA = EPDM, Grey - RB = EPDM, Black - RC = Silicone, Red
RA = EPDM, Grey - RB = EPDM, Black - RC = Silicone, Red
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
l l l
l l l
l l l
l l l
l l l
l l l
l l l
RA RB RC
l l lRA RB RC
IPEX | 86
0131
245 mm 10 M
WIDTH LENGTH
FlashstripStretchable EPDM-roll (grey) with integrated aluminium edges. Suitable for all kinds of connections.
Application
Sealants
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 87
BostikHighqualitySealantsandglue’s.
Silicone.Non-acid,durableelasticsealant.
Description Content Colour
Silicone 60 310 ml. Transparant
Silicone 60 310 ml. White
Silicone 60 310 ml. Black
Universalsealant,durableplasticsealantonbutylrubberbase.
Description Content Colour
Butyl 37 310 ml. Grey
Elasticconstructionadhesiveandsealantin-oneonSMPbase.
Description Content Colour
Simson 007 (sealant + glue) 290 ml. Grey
Superfix (sealant + glue) 290 ml. Grey
High Tack (glue) 310 ml. White
Fireresistantsealant
Description Content Colour
Fireseal A (inside) 310 ml. Grey
Fireseal S (outside) 310 ml. White
For more information and applications please ask our sales department.
FillingFoam
Description Content Colour
Simsonpur (gun) 700 ml. Yellow
Fire resistant foam 700 ml. Yellow / green
Sealants
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 88
BostikHighqualityadhesivecladdingsystems
Adhesivecladdingsystems.
Description Content Colour
Paneltack (glue HPL plates) 290 ml. Grey
Paneltack 600 ml. Grey
Paneltack HM, (Fibrecement sheets) 290 ml. Black
Paneltack HM 600 ml. Black
Rockpaneltack 290 ml. White
Primer SX Black 1 L. Black
Primer paneltack 500 ml. Transparant
Easy Clean Wipes 100 Pcs. White
Foamtape 12 x 3mm 25 M. Black
Bitumicsealingtape,self-adhesivetape,aluminiumfoilontheside.
Description Content Colour
Butaband super 7,5 cm 10 M. Aluminium
Butaband super 10 cm 10 M. Aluminium
Gluesandsealantforroofing.
Description Content Colour
EPDM-Seal (Glue + sealant) 290 ml. Black
Simsontop (polyurethanic glue) 6.5 kg. Yellow brown
Elastroroof (bitumen sealant) 310 ml. Black
For more information and applications please ask our sales department.
Sealants
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
Toolswww. i p e x - g roup . c om
IPEX | 91
0418
0419
Ø Ø
3.0 46 / 16 4.5 58 / 24
3.1 49 / 18 4.6 58 / 24
3.1 49 / 18 4.7 58 / 24
3.2 49 / 18 4.8 62 / 26
3.3 49 / 18 4.9 62 / 26
3.4 52 / 20 5.0 62 / 26
3.5 52 / 20 5.1 62 / 26
3.6 52 / 20 5.2 62 / 26
3.7 52 / 20 5.3 62 / 26
3.8 55 / 22 5.5 66 / 28
3.9 55 / 22 5.7 66 / 28
4.0 55 / 22 5.8 66 / 28
4.1 55 / 22 5.9 66 / 28
4.2 55 / 22 6.0 66 / 28
4.3 58 / 24 7.5 74 / 34
4.4 58 / 24 8.5 79 / 37
Ø
5.0 100
5.0 150
5.0 185
5.1 100
5.1 150
5.1 210
5.7 150
5.7 185
5.7 210
5.7 300
5.8 150
5.8 185
5.8 210
5.8 300
IZAR-HSSStubbydrillsSplitpoint DIN 1897 N
WERKÖ-HSSLongstubbydrillsSplitpoint DIN 1412 C
Tools
Length Length
Length
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 92
0420Ø Ø Ø Ø
4.0 50/110 8.0 550/600 13.0 200/260 19.0 150/200
4.0 100/160 8.0 950/1000 13.0 250/310 19.0 400/450
13.0 400/450
5.0 50/110 9.0 100/160 20.0 150/200
5.0 80/140 9.0 150/210 14.0 100/160 20.0 250/300
5.0 100/160 14.0 150/210 20.0 400/450
5.0 150/210 9.5 100/160 14.0 200/260 20.0 550/600
5.0 250/310 14.0 250/310 20.0 950/1000
10.0 50/110 14.0 400/450
6.0 50/110 10.0 100/160 14.0 550/600 22.0 200/250
6.0 1000/160 10.0 150/210 14.0 950/1000 22.0 250/300
6.0 150/210 10.0 200/260 22.0 400/450
6.0 200/260 10.0 250/310 15.0 100/160 22.0 550/600
6.0 200/260 10.0 300/350 15.0 150/210 22.0 950/1000
6.0 400/460 10.0 410/450 15.0 200/260
10.0 550/600 15.0 400/450 23.0 200/250
6.5 50/110 10.0 750/800 15.0 550/600 23.0 400/450
6.5 100/160 10.0 950/1000
6.5 150/210 16.0 100/160 24.0 200/250
6.5 200/260 11.0 100/160 16.0 150/210 24.0 400/450
6.5 250/310 11.0 150/210 16.0 250/310
11.0 200/260 16.0 400/450 25.0 200/250
7.0 50/110 11.0 250-310 16.0 550/600 25.0 400/450
7.0 100/160 16.0 750/800 25.0 550/600
7.0 150/210 12.0 100/160 16.0 950/1000 25.0 950/1000
7.0 200/250 12.0 150/210
12.0 200/260 17.0 150/210 26.0 200/250
8.0 50/110 12.0 250/310 17.0 250/310 26.0 400/450
8.0 100/160 12.0 400/450 17.0 400/450
8.0 150/210 12.0 550/600
8.0 200/260 12.0 950/1000 18.0 150/210
8.0 250/310 18.0 250/300
8.0 350/400 13.0 100/160 18.0 400/450
8.0 400/460 13.0 150/210 18.0 550/600
SDS+Concretedrills
Tools
Length Length LengthLength
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 93
0421
0422
115 x 3 x 22
180 x 3 x 22
230 x 3 x 22
115 x 3 x 22
180 x 3 x 22
230 x 3 x 22
DroncoCut-off wheels for stone.(Usable for all kinds of stone)
Size
Size
Other sizes and applications on request.
Tools
DroncoCut-off wheels for metal.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 94
0423
0424
5.0 meter 70 mm. 19 mm.
8.0 meter 85 mm. 25 mm.
Length Case Size
Tools
Measuretapes
Length Mouthlength248 mm 32.0 mm. left-handed
248 mm 32.0 mm. right-handed
TinSnipsLeft- and righthanded snips for profile cutting.
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
IPEX | 95
0425 BitsWe supply all types of bits, for any questions please contact our sales department.
Tools
Ipex Europe BVPb 82 - 7468 ZHEnter / the NetherlandsT. +31 (0) 547 384635 , F +31 (0) 547 384637 , E. info@ipex-group.com, I. www.ipex-group.com
Recommended