View
1
Download
0
Category
Preview:
Citation preview
Instruction Manual
G2-201401-07-英
TAIWANTel : +886-4-798-9000 Fax : +886-4-798-9900No.999, Zhonghua Rd. Shengang Township, Changhua County 50952, Taiwan (R.O.C.)
Tel : +886-2-2692-2000 Fax : +886-2-2692-400011F-3., No.27, Lane 169, Kangning St. Shijr City, Taipei County 22180, Taiwan (R.O.C.)
sales@guay2.com, b2b@guay2.comsupport@guay2.compr@guay2.com
Taipei
Sales Dept.Technology Dept.
PR Dept.
ChangHua(Head Quarter)
Tel : +1-626-581-0101 Fax : +1-626-581-10111122 Coiner Court City of Industry, CA 91748 (U.S.A.)sales101@guay2.com
Los AngelesU.S.A.
All G&G products are complied with CE and ROHS 2.0.G&G Armament is also certified manufacturer of ISO 9001.
Instruction Manual
Introduction1
Components2
01
02
03
05
06
07
08
09
10
11
12
13
Introduction
Components
Warning
Selector and safety setting
Installing battery
Sight adjustment
Stock folding
Hop-up adjustment
Setting magazine
Movable parts
Maintenance
Trouble clinic
Parts list
Introduction
For more product information please visit our websitewww.guay2.com
Mock suppressorfor UMGOuick detachable(optional)
Front sight
Grip
Magazine50 rounds(standard)530 rounds(optional)
Magazine catch
Trigger
Stock lock
Charging handle Adjustable rear sight
Folding stock
Scope mount railSide rail
Lower rail
Bolt
Bolt catch
Outer barrel
Safety / Fire selector
G&G is constantly researching new ways to innovate in designs and
materials to ensure the best quality of our products. All G&G products
are designed and build with computer assisted design tools such as
Computer Numerical Control (CNC) turning operation to ensure tight
precision and quality.
G&G values the customer's feedback, as we incorporate improvements
and upgrade to our future products. All G&G products are proudly made
in Taiwan.
It is G&G vision that our customer can enjoy the best experience using
our product, and we strife in delivering the best quality product as the key
to our success. G&G has focused on developments of Automatic Electric
Guns with inimitable characteristics. G&G is proud to present its one of
the kind, UMG.
For more inquiries or information on our product and service, as well as
any questions or feedbacks, please refer to our website www.guay2.com.
Contents
For more product informationplease visit our websitewww.guay2.com
Warning3
Warning4For more product informationplease visit our websitewww.guay2.com
Orange tip disclaimer:
All G&G Airsoft products came with a permanent fixed orange tip required by law, which will grant Airsoft legal usage in the United States and complied with the United States laws.If you alter, remove the orange tip or the item is modified or abused, all warranty will be void.
You may be liable for damaging public, personal property , injuring a person or animal even if you are meant to shoot as a “practical joke.” Always observe good manners and enjoy fun sport shooting.
When you carry the air gun,attach the safety cap,set the selector lever to the safety position and always put the air gun in a case or bag.
Never direct the muzzle towards a person or animal in any direction.That may cause harm or damage to the third party.
Make sure to put the barrel and safety cap on the muzzle,except when you are shooting.Do this to prevent accident,discharge of BB’s and also for dust protection purpose.Never pull the trigger while the barrel and the safety cap is attached.
Select a safe place for operating the air gun,avoid places where people and cars are around.
Safety procedures:1.Attach the safety cap to the muzzle.2.Set the selector lever to the safety position.3.Remove the magazine.4.Remove the battery.
Looking into the muzzle is extremely dangerous regardless of BB’s having been loaded or not.If you get hit in the eye by a BB pellet, you may in worst case, lose your eye sight.
Act ivat ing the t r igger carelessly is extremely dangerous.Never put your finger on the trigger unless the safety cap is removed and you are ready to shoot a target.
When shooting the air guns for target practice or in a game situation, you and all participants must wear safety goggles or other eye protective gear. Also,pay attention to ricochets. It is very important to pay attention to third parties other than the participants.
Always attach the safety cap to the muzzle,remove the battery and store the air gun in a case or bag and at a place that is out of reach by children.
There may be cases where some BB’s remain in the gun after the magazine has been removed.After removal of the magazine,direct the muzzle towards a safe direction and pull the trigger to confirm that there are no BB’s remain in the gun,then attach the safety cap.
Disassembling or modifying the gun may adversely affect the performance and cause of danger. “ It may be against the Law.”
All products employ high precision 6.04mm barrel. Use with precision 5.95mm BB pellets is highly recommended. Damage to the product due by faulty BB pellets voids the warranty. Use with caution.
Adult supervision required.May be hazardous up to 50 meters.Read all instructions before using this product.Always wear safety goggles when using this product.Misuse or careless handling of this product may cause injury.This product is intended for users 18 years or older.The buyer and the user of this product shall adhere to all local laws regulating the usage and the ownership of airsoft guns.
Selector and safety setting5
Installing battery6
► Use only the G&G battery purchased from your local dealer.
WarningFor more product informationplease visit our websitewww.guay2.com
For more product informationplease visit our websitewww.guay2.com
Always set the safety mode immediately after firing.
► Never operate the selector while pulling the trigger. Otherwise, malfunctions may occur.► Pulling the trigger with the selector being set at safe mode may damage the airsoft gun.
Warning
Automatic firing
Fully automatic mode
The gun will be fired automatically while the trigger remains being pulled.
1
To fold the stock.
2
Opening the battery cover.
4
Connect the connectors then insert intothe receiver.
5
Reinstall the battery cover.
► Please select quality battery with the CE approval, to avoid any un-necessary damage on your product.► It is strongly recommended the use of G&G UMG type Ni-CD 9.6V 1100 mAh rechargeable battery only.
3
To insert the battery into the receiver.
Single shot
Semi mode
The gun will be fired one shot each time when pulling the trigger.
The trigger can not be pulled
Safety setting mode
Installing battery
When you are not firing the gun or during storage.Always set the selector to the safe position and attach the protective cap on the muzzle.
7
Hop-up adjustment8
Sight adjustment / Stock folding
2
At the same time the bolt cover will open.
For more product informationplease visit our websitewww.guay2.com
Height adjustment screw:To lift or lower the rear sight.
Turning the screw will move the pellet hitting point to the left or right.
Rear sight adjustment
Stock folding
Precision shooting Common shooting
1
Press the stock lock.
2
Folding the stock to the right side.
3
Pulling the stock up to catch the hook.
Pull up
► Do not catch your fingers in the dummy bolt.
Warning
1
Pull the charging handle backward andlock to open the bolt.
3
Sliding the Hop-up adjustment piece foward or backward to adjust the Hop-up effect.
Hop-up adjustment
Normal Hop
Too much hop-up ( Return the lever toward Normal ).
Direction.
Not enough hop-up ( Move the lever toward HOP ).or too much hop-up ( Return the lever toward Normal ).
Warning ► Never hold the gun sideways as the BB pellets will curve right or left.► This is due to the HOP-UP system.
Setting magazine9
Movable parts10
Warning ► Confirm that the safety lever is set to safety position and do not place your finger on the trigger.► Always use the G&G BB pellet or diameter 5.94 ~ 5.96 mm BBs for this air gun. ► G&G shall not be held responsible for any damage or accidents arising from the use of pellets supplied by other manufacturers.
1
Top view Bottom view
50 Rounds magazineConnect the BB charger muzzle to the top of the magazine.
1
Load G&G 5.95mm BB pellets into the BB charger.
2
Push the BB pellet into the magazine with the charging rod.
3
Insert outer barrel into the suppressor.
2
To push and turn the suppressor until youhear a click sound.
3
1. Press the button.2. Pull the suppressor out.
► It is strongly recommended the use of G&G suppressor only.
Warning
For more product informationplease visit our websitewww.guay2.com
Installing suppressor
Insert the magazine into the body until you hear a click sound.
1
Top view Bottom view
530 Rounds magazineOpen the cover on the top of the magazine.
1
Load G&G 5.95mm BB pellets into the magazine.
2
After the BB pellets had been loaded. Close cover and turn the gear on the bottom until the sound changes.
3
Click
Click
Press the magazinecatch to release.
2
Pull the magazineout of receiver.
3
1
2
1
Pull the charging handle backward to open the bolt cover.
2
Press the lower part of the bolt catch to fix bolt cover.
3
Press the upper part of the bolt catch to release the bolt cover.
Uninstalling suppressor
For more product informationplease visit our websitewww.guay2.com
Maintenance when pellets speed becomes low
Removing clogged pellets
Warning
► Do not jam the cleaning rod into the barrel by force.► Should the BB’s remains inside the barrel after following the instruction above, with the protection cap over the barrel, point the gun to a safe direction, and discharge any loosened BB’s in semi-automatic mode.
► Make sure no dirt gets into the chamber to avoid clogging of pellets.► Hop-up may be unstable for the first 200 to 300 rounds after using silicone oil, this is the normal operation of the gun.► Never use CRC-556, WD40 or other corrosive lubricant.
Warning1. Return the hop-up dial to the Normal position and insert the cleaning rod from the lead edge of the barrel.2. To remove clogged BB’s, carefully insert the cleaning rod inside the flat tip facing down as shown below.
For more product informationplease visit our websitewww.guay2.com
Maintenance11
Trouble clinic12
1. Drop a few drops of silicone oil or teflon oil into the pellet entrance. After insert BB pellets into the magazine, fire the gun for up to 200~300 pellets.2. To complete the cleaning, use the cleaning rod ( with cotton ) to remove excess oil.
Parts list13
Parts list14
For more product informationplease visit our websitewww.guay2.com
01
0203
0102
02
01 02
0304
050607
01
02
02
02
02
02
02
02
03
04
05
06
0708
09
10
11
0405
06
0708 09
1003
02
01
01
02
03
04
01
02
03
0405
0201
03
04
05
06
01
02
03
05
04
0607
0908
1011
12
13
1617
18
19
15 14
20
21222301
0304
05
02
0607
08
09
01
02
03
04
05
06
0708
01
02
03
04
05
UMG-01
UMG-02
UMG-04
UMG-05
UMG-03
UMG-06
UMG-07
UMG-08
UMG-10 UMG
-14
UMG-15
UMG-16
UMG-13
UMG-11
UMG-12
UMG-09
UMG-01
UMG-02
UMG-03
UMG-04
UMG-05
UMG-06
UMG-07
UMG-08
UMG-09
UMG-10
UMG-11
UMG-12
UMG-13
UMG-14
UMG-15
UMG-16
Folding stock set
Motor set
Gear box set
Mock bolt set
Lower receiver set
Bolt catch set
Rear receiver cover set
Upper receiver set
Rear sight set
Upper rail set
Magazine
Hop-up set
Lower rail set
Front sight set
Inner barrel set
Outer barrel set
Recommended