View
2
Download
0
Category
Preview:
Citation preview
InstantIndustrial Adhesives
A complete line ofcyanoacrylateadhesives developeduniquely forindustrial,manufacturing,assembly andspecialty use.
Instant Solutions with Aron Alpha®
Elmer’s Products, Inc. of Ohio and Toagosei Co., Ltd. ofJapan bring you Aron Alpha®, a family of industrialcyanoacrylate adhesives (instant glues) for a wide range ofmanufacturing, automotive, electronic and generalassembly applications.
Toagosei Co., Ltd. has been producing cyanoacrylateadhesives since 1960, commercially marketed under thenames of Aron Alpha® in Japan and Cyanolit® in Europe,and Krazy Glue® in the United States. Elmer’s Products®,Inc. markets and distributes Krazy Glue® to the retail tradeand Aron Alpha® to the industrial trade in North America.
Adhesive Technology to Serve the Industry
Aron Alpha® offers an extensive line of cyanoacrylateadhesives which satisfy the majority of bondingapplications. The wide range of viscosities–from wickingliquids to gap-filling thixotropic gels–ensure instant anddurable bonds for a broad variety of substrates.
Special formulations are available to meet toughrequirements such as impact, heat, thermal shock, stressresistance and tolerance to chemicals or other harshenvironments.
If our existingproduct line does notoffer the answer to yourrequirements, we willwork with you todevelop a bondingsystem that willperform to yourspecifications.
Working with Youto Improve theProcess
We begin with an analysis of your requirements…yourprocesses, materials to be adhered, environment, volume,and aesthetic considerations. Your goals are analyzed –manufacturing efficiencies, pre- or post-assembly quality,manual or automatic processes, product durability – priorto making any Aron Alpha® product recommendations.
Call the Technical Assistance Team at 1-800-338-5192for an immediate analysis.
With manufacturing facilities worldwide, extensiveresearch and technical capabilities, responsive customer
service, and controlled distribution, Aron Alpha offersmanufacturers innovative solutions to challenges in
manufacturing and assembly.
Aron Alpha® offers an broadselection of standard
products plus customizedformulations, along with
primers, accelerators,dispensing tools and
equipment to satisfy anyindustry or application.
CO
RP
OR
AT
E
ANSI★ RAB
QMS
AC
CR
ED
ITE
D
★
Manufacturing Capabilities
Because we manufacture, package anddistribute our own products, product freshness,quality, and shelf-life are stringently controlled.In addition to our standard line of products,special formulations are available, as well as avariety of packaging options. Aron Alpha®
formulations are designed to perform well in awide variety of standard dispensing machines.
Adhesive challenges are welcomed by oursales, marketing and research teams. United Statesresearch and technical facilities are located at the Ohioplant whose quality management system is registered toISO 9001 through BVQI Quality System Registrars.Additional technical support is available through otherlocations worldwide.
Why Cyanoacrylates?
Cyanoacrylates are single component instant adhesivesthat bond a wide variety of surfaces with a strong,durable bond. The ease of application, wide selection ofperformance parameters, and reliable bonding offers newand innovative manufacturing efficiencies andopportunities.
Environmentally safe, cyanoacrylates offer a solvent-free solution to your most difficult bonding problems.
— 1 —
CA
PA
BI
LI
TI
ES
THE BENEFITS OFARON ALPHA®
CYANOACRYLATES• One Component• Instant Adhesion• Various Set Times• Strong Bond• Bonding of Dissimilar
Materials• Even Stress Distribution• Substrates Resist
Distortion• Seal and/or Insulate
Substrates• Reduce Mechanical
Assembly of Parts • Transparent Bond for
Product Aesthetics• Special Properties for
Demanding Applications• Chemical Resistant• Wide Viscosity Range
– Low for rapid bonds,preassembled orwicking applications
– Moderate for slowercure and to preventmigration
– High for large gaps andporous materials
• Special formulations forautomatic dispensingapplications
Aron Alpha® cyanoacrylates arespecially formulated for use in a
wide variety of applications.Our stringent Quality
Management System hasachieved ISO 9001 Registration,
certificate number 47114.
ISO 9001
How to Select the Right Aron Alpha®
Cyanoacrylate Adhesive
A clear definition of your objectives is key in theselection of the proper adhesive for yourrequirement. Here is a checklist of information weneed to know to provide optimum solutions.
1. MATERIALS TO BE BONDED The chemical name and/or the trade nameof the materials to be adhered are requiredfor our Technical Assistance team. Othermaterial considerations are:• Cleanliness/pre-treatment• Porosity of the substrates• Substrate sensitivity to cyanoacrylates
(i.e. plastics)• Surface area of the bond
2. MATING OF BONDED SURFACEThe gap between the two surfaces to be joined candetermine the viscosity of the cyanoacrylate.Whether the adhesive is applied pre-assembly orpost-assembly on the two surfaces is anotherdetermining factor. Aron Alpha® cyanoacrylateformulas range from wicking (permeation)between two tightly mated surfaces, to thixotropicgel formulations designed to fill gaps in unevensurfaces. Some surfaces may have to bepre-treated by cleaning, sanding, orpriming to ensure a strong, permanentbond.
3. SPEED OF CUREThe manufacturing/assembly process plays apart in the proper selection. High speedautomated equipment generally requires a veryfast setting adhesive, while manual assemblyand the pieces to be bonded may require timefor proper positioning or re-positioning.
4. AESTHETIC REQUIREMENTSVisible bonded joints may require additionalconsideration…such as chlorosis (bloom)potential, stringiness of adhesive, productclarity and method of application.
5. ASSEMBLY ENVIRONMENTTemperature, humidity, ventilation, assembly methods,equipment and materials being bonded can influence theperformance of the adhesive. Less than ideal conditionsshould be factored into your adhesive selection.
— 2 —
SELE
CTIN
G T
HE
RIG
HT
PRO
DU
CT
Selecting the right AronAlpha® cyanoacrylate andusing the proper primers
and accelerators whenrequired ensures a strong,
permanent bond.
A wide variety of materialscan be bonded with Aron
Alpha® cyanoacrylates,including dissimilar
substrates.
Chlorosis or “blooming” isvisible on the bonded tube
on the left. Aron Alpha®
253TX, Gel 10, and Series800 adhesives are thechoice when aesthetic
considerations areimportant.
6. END-USE ENVIRONMENTThe final use and/or operating environment of theadhered parts is critical in specifying the rightcyanoacrylate. Key conditions to assess are:• Temperature• Humidity• Chemical interaction/corrosion
7. BOND STRESSIf the bonded assembly is to be subjected to stress in itsfinal environment, the proper adhesive becomes criticalto strength and durability. Types of stress to consider are:
• Tensile Load• Compression Load• Shear Load• Impact Load• Peel Load• Cleave loadJoint design can influence the functionality ofthe bond and, in conjunction with the properadhesive selection, bonded parts can providebetter, more cost efficient assembly solutions.
Use Our Resources!
The Aron Alpha® standard product lineoffers such a wide range of options andperformance parameters that it is often simply amatter of selecting the right adhesive. Detailed
Technical Information Data Sheets are available for eachproduct shown above.
Our Technical Assistance team is available to resolve anyadhesive challenge–and provide solutions! If yourrequirements are not addressed by our product selection, orif you need more information, call the Aron Alpha®
Technical Assistance Staff at 1-800-338-5192.
SELECTING
THE R
IGH
T PRO
DU
CTTensile
Load
CompressionLoad
ShearLoad
ImpactLoad
PeelLoad
CleaveLoad
— 3 —
The end-use environmentis a strong determiningfactor in specifying theright Aron Alpha®
cyanoacrylate.
Bonding dissimilarsubstrates can be achallenge. AronAlpha® has aformulation toaccommodatevirtually anymaterials to bebonded.
— 4 —
PR
OD
UC
T G
UID
ESERIES 200E
For clean, fast applications. Bestfor high speed automated
assembly.
SERIES 200General purpose adhesive for a variety of
applications. Various viscosities and gap fillingproperties available.
SERIES 100Superior tensile andshear strengths, well
suited for metal bonding.
PRODUCT TYPE 101 102 201 202 203 241 212E 241E 252EGENERAL PROPERTIES
Color Clear Clear Clear Clear Clear Clear Clear Clear ClearViscosity (cps) 2 100 2 100 1500 40 100 40 500Gap Fill Low Med Low Med High Low Med Low HighBase Monomer Methyl Methyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl
USE ON THESE SUBSTRATESRubber/Plastic � � � � � � � � �
Metal � � � � � � � � �
Porous � � � � � � � � �
UNIQUE RESISTANCE PROPERTIES (APPLICABLE ONLY TO CERTAIN PRODUCT TYPES AND/OR SERIES)ImpactPeelThermal ShockNo RunNo Odor
MILITARY SPECS MIL-A-46050CType / Class 1 / 1 1 / 2 2 / 1 2 / 2 2 / 3 2 / 1 2 / 2 2 / 1 2 / 3
METALSSteel
Set Time (sec) 15 50 15 50 100 40 15 15 15Tensile Strength (psi) 6100 6100 4600 4600 4100 4600 4600 4600 4600
Stainless Steel (SUS)Set Time (sec) 15 50 15 50 100 40 15 15 20Tensile Strength (psi) 5700 5700 4100 4100 3700 4100 4100 4100 4100
AluminumSet Time (sec) 15 60 15 60 130 60 60 60 60Tensile Strength (psi) 4000 4000 2800 2800 2600 2800 2800 2800 2800
PLASTICSRigid PVC
Set Time (sec) 5 10 5 10 25 10 3 3 3Tensile Strength (psi) 5000 5000 5000 5000 5000 5000 5000 5000 5000
Acrylics (PMMA)Set Time (sec) 10 30 10 30 80 20 5 5 5Tensile Strength (psi) 5000* 5000* 5000* 5000* 5000* 5000* 5000* 5000* 5000*
ABSSet Time (sec) 15 60 15 60 120 50 3 3 3Tensile Strength (psi) 3600* 3600* 3600* 3600* 3600* 3600* 3600* 3600* 3600*
PolycarbonateSet Time (sec) 20 60 20 60 100 60 10 10 10Tensile Strength (psi) 5000 5000 5000 5000 5000 5000 5000 5000 5000
ELASTOMERSNeoprene Chloroprene (CR)
Set Time (sec) 5 10 5 10 25 10 5 5 5Tensile Strength (psi) 360* 360* 360* 360* 360* 360* 360* 360* 360*
Natural RubberSet Time (sec) 5 10 5 10 25 10 5 5 5Tensile Strength (psi) 360* 360* 360* 360* 360* 360* 360* 360* 360*
HARD-TO-BOND MATERIALSPolyethylenePolypropylenePolyacetalPolyethylene-terphthalate (PET)NylonSoft PVCSilicone RubberGlass
LEGEND:
� Excellent ��� Superior� Fair �� Very Good� Poor � Good
Requires Use of Primer to Achieve Bond!See Page 8
* indicates material failure. This is a partial listing of the performance of Aron Alpha® cyanoacrylate adhesives on various substrates. Detailed technical information is available upon request.The setting time and bond strength test results were prepared at the Aron Alpha lab. Actual results may vary under application conditions.
— 5 —
SERIES 400XEngineered for high
temperature and highimpact resistance.
SERIES 200FSurface insensitive adhesives, ultra-fast setting for porous, soft or tough-to-bond substrates.
Series 200TX & Gel: No run, no stringing, excellent gap filling characteristics with good strength on a variety of materials.
221 232 202F 221F 231F 241F 252F 282F 253TX GEL 10 401X 402X 403X
Clear Clear CLear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear2 300 85 2 30 40 500 800 5000 170000 2 100 1500
Low High Med Low Low Low High High High High Low Med HighEthyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl Ethyl
� � � � � � � � � � � � �� � � � � � � � � � � � �
� � � � � � � � � � � � �
�� �� ��
� � ���� ���
2 / 1 2 / 2 2 / 2 2 / 1 2 / 1 2 / 1 2 / 3 2 / 3 2 / N/A 2 / 1 2 / 2 2 / 3
10 15 5 3 3 15 10 15 1520 15 50 1004600 4600 4600 4600 4600 4600 4600 4600 4600 4300 5800 5800 5800
10 15 5 3 5 15 15 15 1520 15 30 604100 4100 4100 4100 4100 4100 4100 4100 4100 3600 6400 6400 6400
10 15 5 3 5 15 10 15 1530 15 60 1302800 2800 2800 2800 2800 2800 2800 2800 2800 2800 5800 5800 5800
3 5 3 1 1 5 5 5 5 5 5 10 255000 5000 5000 5000 5000 5000 5000 5000 5000 3800 5000 5000 5000
5 10 3 1 1 10 5 10 1010 10 30 805000* 5000* 5000* 5000* 5000* 5000* 5000* 5000* 5000* 2800 5000* 5000* 5000*
3 15 5 1 3 15 5 15 1515 15 60 1203600* 3600* 3600* 3600* 3600* 3600* 3600* 3600* 3600* 3000 3600* 3600* 3600*
10 20 5 1 3 20 10 15 1530 20 60 1005000 5000 5000 5000 5000 5000 5000 5000 5000 3600 5000 5000 5000
3 5 3 1 1 5 3 5 5 5 5 10 25360* 360* 360* 360* 360* 360* 360* 360* 360* 360* 360* 360* 360*
3 5 3 1 1 5 3 5 5 5 5 10 25360* 360* 360* 360* 360* 360* 360* 360* 360* 360* 360* 360* 360*
PR
OD
UC
T
GU
ID
E
Requires Use of Primer to Achieve Bond!See Page 8
This is a partial listing of the performance of Aron Alpha® cyanoacrylate adhesives on various substrates. Detailed technical information is available upon request. * indicates material failure.The setting time and bond strength test results were prepared at the Aron Alpha lab. Actual results may vary under application conditions.
PRO
DU
CT G
UID
E
— 6 —
SERIES 800Low odor, low chlorosis (bloom) whena transparent bond, appearance and
strength are required.
SERIES 400TExtra tough adhesive with highest heat, peeling, impact and
thermal shock resistance.
PRODUCT TYPE 403T 403TB 432TB 453TB 432TW 801 802 803GENERAL PROPERTIES
Color Clear Black Black Black White Clear Clear ClearViscosity (cps) 1000 1000 300 5000 300 10 85 1500Gap Fill High High High High High Low Med HighBase Monomer Ethy Ethyl Ethyl Ethyl Ethyl Ethoxyethyl Ethoxyethyl Ethoxyethyl
USE ON THESE SUBSTRATESRubber/Plastic � � � � � � � �
Metal � � � � � � � �
Porous � � � � � � � �
UNIQUE RESISTANCE PROPERTIES (APPLICABLE ONLY TO CERTAIN PRODUCT TYPES AND/OR SERIES)Impact ��� ��� ��� ��� ���Peel ��� � � � �Thermal Shock �� �� �� �� ��No RunNo Odor ��� ��� ���
MILITARY SPECS MIL-A-46050CType / Class N/A / 1 N/ A / 2 N/A / 3
METALSSteel
Set Time (sec) 90 60 30 90 30 3 15 30Tensile Strength (psi) 4700 5500 5800 5300 5800 4400 4400 4400
Stainless Steel (SUS)Set Time (sec) 90 60 30 90 30 5 15 30Tensile Strength (psi) 5000 5700 5500 5300 5500 3700 3700 3700
AluminumSet Time (sec) 120 90 30 120 30 3 15 30Tensile Strength (psi) 5300 5400 5300 5300 5300 3800 3800 3800
PLASTICSRigid PVC
Set Time (sec) 30 15 10 30 10 5 10 15Tensile Strength (psi) 4300 3600 3800 3300 3800 4600 4600 4600
Acrylics (PMMA)Set Time (sec) 45 45 30 90 30 10 15 30Tensile Strength (psi) 5000* 5000* 5000* 2800 5000* 3700 3700 3700
ABSSet Time (sec) 10 10 3 15 3 3 30 45Tensile Strength (psi) 2800 3000 3400 2800 3400 2600 2600 2600
PolycarbonateSet Time (sec) 15 15 10 20 10 15 30 60Tensile Strength (psi) 5000 5000 5000 3600 5000 3300 3300 3300
ELASTOMERSNeoprene Chloroprene (CR)
Set Time (sec) 30 30 15 30 15Tensile Strength (psi) 360* 360* 360* 360* 360*
Natural RubberSet Time (sec) 30 30 15 30 15Tensile Strength (psi) 360* 360* 360* 360* 360*
HARD-TO-BOND MATERIALSPolyethylenePolypropylenePolyacetalPolyethylene-terphthalate (PET)NylonSoft PVCSilicone RubberGlass
LEGEND:
� Excellent ��� Superior� Fair �� Very Good� Poor � Good
Requires Use of Primer to Achieve Bond!See Page 8
* indicates material failure. This is a partial listing of the performance of Aron Alpha® cyanoacrylate adhesives on various substrates. Detailed technical information is available upon request.The setting time and bond strength test results were prepared at the Aron Alpha lab. Actual results may vary under application conditions.
ACHIEVING OPTIMUM BOND STRENGTH
HOW TO APPLY ARON ALPHA® ADHESIVES
1. Remove oil, grease, rust, releaseagents, and other residue fromthe surface to be bonded.Degrease with a suitable solvent.Remove rust or paint withsandpaper.
2. Protective eyewear andpolyethylene gloves should beworn to protect againstaccidental bonding of fingers orspraying adhesive into eyes. Thesubstrates should be dry and at orabove 68°F (20°C). Keep area wellventilated to remove fumes andprevent chlorosis.
3. Use as little adhesive as possibleon the smallest surface to bebonded. Press two surfacestogether to ensure a close fit. Thesetting time will vary with thematerials and the adhesive used.The bond will set within a fewseconds…up to a few minutes atmost. Maximum strength isachieved in 24 hours.
— 7 —
Apply a minimum amount ofadhesive to one surface. Press lightly to let adhesive spread
across surface. Use gel formula forporous or poor-fitting surfaces.
When it is difficult to position two surfacesbecause of fast set time, mate surfaces and apply adrop of glue at the crack. Capillary action willspread the adhesive.
PROPER BONDING SURFACES: Close fitting, nonporous surfaces provide the best bond. A clearance of upto .001 to .003 inches between the bonding surface isideal. A slightly rough surface produces the best bond.For porous surfaces or wider gaps consider a higherviscosity Aron Alpha® adhesive.
PLASTIC CRACKING OR DISSOLVING: Plastics suchas PS, ABS, AS, acrylics, cellulose or polycarbonate resinscan swell, crack or dissolve when exposed tocyanoacrylate liquids. Avoid this by applying a very thinlayer of the fastest setting formula, or use an acceleratorto speed curing.
HIGH TEMPERATURES: Temperatures above 176°F(80°C) will cause failure of most cyanoacrylates. AronAlpha® offers special high temperature resistant adhesives(400X or 400T Series) that retain bond strength up to248°F (120°C).
IMPACT STRENGTH: Cyanoacrylates provide hightensile strength but comparatively poor resistance topeeling or impact loads. Proper design of the adhesivejoint—tongue and groove or sleeve joints, and rubberinserts—will improve bond performance. Aron Alpha®
400X and 400T Series provide significantly higherimpact resistance.
CHLOROSIS (BLOOMING): Cyanoacrylates canproduce a white powder resin when applied in very
humid conditions or when the bonded materials areimmediately placed in a closed space. The cyanoacrylateliquid will volatilize from the bonded area, polymerize inthe adjacent air, and attach itself to the immediate area.There are a number of ways to avoid chlorosis:
• Do not use excessive amounts of the adhesive
• Keep the environment dry and temperatures at 68°F(20°C) or higher.
• Disperse the volatilized monomer with a fan orventilator
• Use an accelerator to speed curing.
• Use Aron Alpha® 800 series, specially formulated tominimize chlorosis
• If chlorosis occurs, remove the deposit with a drycloth, or use a solvent that will not dissolve thesubstrate.
Please refer to the Aron Alpha® CyanoacrylateSelection Guide on the previous pages to aid in theselection of the right Aron Alpha® product type for yourapplication.
Our Technical Service Representatives are available tohelp determine the best Aron Alpha® product type foryour process and environment, and Materials Safety DataSheets (MSDS) on each of the Aron Alpha product typesare available by calling 1-800-338-5192.
AccessoriesMany substrates present bonding
problems that can be overcome withproper surface cleaning, preparation andacceleration of polymerization or curing.Aron Alpha® offers products to improveperformance of the cyanoacrylates inproblem situations.
Primers
• PP PRIMER: Preparespolypropylene and relatedsubstrates
• PP PRIMER S: PP Primer withan accelerator to reducebonding time to seconds
• EN PRIMER: Preparesengineering plastics and relatedsubstrates
• SILICONE RUBBER PRIMER:Prepares silicone rubber andrelated substrates
• GLASS PRIMER: Prepares glassfor adhesion to other substrates
Accelerators
Facilitates extremely fast cure of cyanoacrylates. Useful in “building”adhesives to fill gaps, and curing of cyanoacrylates on acidic and poroussurfaces. Accelerators can remove surface contaminants and preventadhesive migration. It can be applied before or after application of theAron Alpha® adhesive…consult our Technical Assistance Team for furtherinformation.
• ACETONE BASED: For general use; use caution with plastics
• ALCOHOL BASED: For general use
• HEPTANE BASED: For general use, best suited for sensitive plastic surfaces
Debonder
A clean-up solvent for cyanoacrylates. Use to quickly and easilydissolve cured cyanoacrylate adhesives between adhered parts, excessadhesive on surfaces, or on bonded skin.
— 8 —
Use this Primer � PP PPS EN Silicone Glasson this �SubstrateSoft PVCPolyvinylchloride ✔ ✔PEPolyethylene ✔ ✔ ✔PPPolypropylene ✔ ✔POMPolyoxymethylene (Polyacetal) ✔PET(P)Polyethylene Terephthalate ✔PPSPolyphenylene Sulphide ✔ ✔SISilicone Rubber ✔EPT RubberEthylene Propyrene Terpolymer ✔ ✔ ✔Polyurethane
✔ ✔Glass ✔
*Extra HighSpeed Cure
Accelerators can speed the curing process andallow use of high viscosity cyanoacrylates forchallenging bonding requirements.
The RightAdhesivefor Every
Application
The Dental Laboratory AdhesiveSystem from Aron Alpha offers acomplete line of cyanoacrylateadhesives developed for dentallaboratory market. The wide varietyof viscosities, setting times, andapplicator sizes provides the perfectsolution for every lab requirement.Primers, accelerators, adhesivedebonder, and applicationaccessories complete the System…all available from a single source.
The CompleteDental LaboratoryAdhesive System
ANSI★ RAB
QMS
AC
CR
ED
ITE
D
★
ISO 9001
How to Select the RightAron Alpha® CyanoacrylateAdhesive
Your dental lab needs a variety ofadhesive viscosities to accomplish thevarious tasks encountered daily. LIGHT VISCOSITY (2 to 100 cps)• Coating and sealing dies• Fixing articulation systems• Assembling crowns and bridgework
for soldering
MEDIUM VISCOSITY (100 to 1000 cps)• Setting dowel pins in same sized
holes• Mending broken dies, models and
bases
HEAVY VISCOSITY(1000 to 170,000 cps)• Filling undercuts and voids in dies• Setting dowel pins in oversized
holes• Building up dies/replacing spacers• Stabilizing abutment segments to
eliminate die movement
PRIMERS• Pre-treat hard to bond plastics with
Aron Alpha primers to ensure astrong bond
• PP Primer: Prepares polypropyleneand related substrates
• EN Primer: Prepares engineeringplastics and related substrates
ACCELERATORS• Facilitates extremely fast cure of
cyanoacrylates. • Useful in “building” adhesives to fill
gaps, and curing of cyanoacrylateson acidic and porous surfaces
DEBONDER• A clean-up solvent for
cyanoacrylates • Quickly and easily dissolves cured
cyanoacrylate adhesive betweenadhered parts, excess adhesive onsurfaces, or on bonded skin
Your Authorized Aron Alpha®
Distributor:
SELE
CTIN
G T
HE
RIG
HT
PRO
DU
CT
Selecting the right Aron Alpha®cyanoacrylate and using the proper
primers and accelerators whenrequired ensures a strong,
permanent bond. Our stringentQuality Management System hasachieved ISO 9001 Registration,
certificate number 47114.
ARON ALPHA: The Dental Laboratory Adhesive SystemARON ALPHA CYANOACRYLATESPackage Size 10 gram 20 gram 50 gramUnits per Case 25 25 20Aron Alpha Type Viscosity Set Time Aron Alpha Reorder Number
201 2 cps 5-20 sec AA-480 AA-490 AA-591202 100 cps 10-60 sec AA-475 AA485 –203 1500 cps 25-120 sec AA-472 AA-488 –241 40 cps 10-60 sec AA-468 AA-576 –221 2 cps 3-10 sec AA-471 AA-571 AA-592
253TX 5000 cps 5-15 sec – – AA-820Gel 10 170,000 cps 5-30 sec – AA-580 –801* 10 cps 3-15 sec – AA-721 –802* 85 cps 10-30 sec – AA-723 AA-598803* 1500 cps 15-60 sec – AA-725 AA-599
* Low odor formula; Low chlorosis for aesthetic considerationsARON ALPHA PRIMERS /ACCELERATORS/DEBONDERPackage Size 100 ml 120 ml 10 oz.Units per Case 10 10 12Aron Alpha Product Aron Alpha Reorder NumberPP Primer AA-673 – –EN Primer AA-672 – –Aerosol Accelerator – – AA-705Acetone Accelerator – AA-704Debonder N AA-716 – –
ARON ALPHA ACCESSORIESUnits per Case 6 12Aron Alpha Product Aron Alpha Reorder NumberSoft Extender Tips for Glue Bottles – AA-602Primer/Accelerator Pump Sprayer AA-606 –
Elmer’s Products, Inc.180 East Broad Street , Columbus, OH 43215Call Toll Free for Supplier location nearest you…1-800-338-5192Fax 614-225-7167 or e-mail: sales@aronalpha.com
AA-1038
CARE AND HANDLING OF ARON ALPHA®
1. Avoid moist or humid conditions. Replace captightly. Store in airtight conditions with a desiccantfor best results. NEVER store Aron Alpha® adhesiveswith an accelerator.
2. Ultraviolet rays (sunshine) will reduce the shelf lifeof cyanoacrylates. High temperatures can deterioratethe original bonding strength of the adhesive. Storein a cool dark location. Refrigeration at 40-50°F (5-10°C) is recommended for extended storage.
3. Aron Alpha® may instantly bond fingers and skin.Caution should be exercised and protective clothingand eyewear worn when using the adhesives. DONOT try to pull bonded skin apart. Skin can be de-bonded with warm soapy water (and gentlemanipulation of the bonded area to break thebond); a releasing agent, acetone, or other solvents,including Aron Alpha® debonder.
4. If Aron Alpha® comes in contact with the eye,immediately wash thoroughly with water and seekmedical attention. NEVER use solvents or rub theeye. Aron Alpha® is a powerful adhesive. Keep awayfrom infants and young children.
5. In a liquid state the adhesive may have a slightlyirritating odor, so provide adequate ventilationwhen using it for a longer period of time. Contactour Technical Assistance Team at 1-800-338-5192 fordetailed Technical Information and Materials SafetyData Sheets (MSDS).
6. Aron Alpha® will produce an exothermic reactionwhen it is polymerized (resinified). The exothermicreaction is particularly strong when large amountsof Aron Alpha® monomer permeates a porousmaterial, such as a woven cloth or urethane rubber,and quickly solidifies. If an accelerator such ascaustic soda or amine is contained in such materials,the exothermic reaction will take place and can giveoff sufficient heat to cause burns.
Disclaimer: “Seller makes no warranty, express or implied, concerning theproduct or merchantability or fitness thereof for any purpose except that theproduct shall conform to contracted specifications, and that the product doesnot infringe any valid United States patents.
“The Buyer assumes the sole responsibility of determining the suitability of theproduct for the uses and application contemplated by Buyer and others.Furthermore, the Buyer assumes all risk and liabilities for results obtained bythe use of the product, whether used singly or in combination with othermaterial, except those relating solely to the use product not conforming to thecontracted specifications, which non-conformity is not known to Buyer and isnot discoverable by the Buyer, by testing or otherwise, prior to the use thereofby Buyer or others. Any suggestions or recommendations made by Sellerconcerning uses or applications of the product are believed to be reliable, butSeller makes no warranty or guarantee of results obtained since the conditionsof the use and application by Buyer and others are beyond the Seller’s control.”
InstantIndustrial Adhesives
Elmer’s Products, Inc.180 East Broad StreetColumbus, OH 43215
Call Toll Free to Order…
1-800-848-9400Or Fax: 614-225-4085
A complete line ofcyanoacrylateadhesives developeduniquely forindustrial,manufacturing,assembly andspecialty use.
InstantIndustrial Adhesives
Elmer’s Products, Inc.180 East Broad StreetColumbus, OH 43215
Call Toll Free to Order…
1-800-848-9400Or Fax: 614-225-4085
AA-1037
Your Authorized Aron Alpha® Distributor:
Recommended