View
10
Download
0
Category
Preview:
Citation preview
INDUSTRIAL GRADE HIGHLY DURABLE, EASY STRIPPING POWER CABLES
INSULATION 90°C ethylene-propylene rubber (EPR)
JACKET1 Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking. AMERCABLE E97865 TYPE G-GC [Size] 3/C 2000V 90C WET OR DRY (UL) SUN RES OIL RESISTANT 60C -40C FT5 [MSHA}
CONDUCTORS Bare copper
GROUND WIRES (2) Bare copper with polyester tape separator and covered with green EPR. Also available with uncovered ground.
GROUND CHECK CONDUCTOR2 Bare copper with polyester tape separator and covered with yellow Ethylene Propylene Rubber (EPR).
37-442
TYPE G-GC 3/C HEAVY-DUTY EASY-STRIP JACKET 2000 VOLTS
Manufactured by Nexans AmerCable • (870) 862-4919 • (800) 643-1516 • Fax (870) 862-9613
,FEATURES � Highly durable, abrasion-resistant CPE jacket specially designed
and cured for easy stripping � Outstanding Nexans AmerCable engineering support
APPLICATION Manufactured for use with static or slow-moving industrial equipment, including light-duty mining applications. Nexans AmerCable INDUSTRIAL GRADE Type G-GC features a reinforced jacket that is specially designed for easy stripping and cable preparation.
This cable is designed for applications where grounding conductors and a ground check conductor are required. Recommended maximum continuous conductor temperature is 90°C. Suitable for shallow water submersion when correctly terminated and sealed.
Cable carries “MSHA” marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-381/NEMA WC-58.
RATINGS & APPROVALS � Mine Safety & Health Administration (MSHA) � Pennsylvania Department of Environmental Protection � UL listed Type G-GC meeting requirements of UL 1650
and UL portable power cable file E97865
Specially Designed &
Cured CPE Jacket for Easier, Faster
Stripping!
________
CSA constructions
available upon request
SIZE AWG
8 6 4 2 1
1/0 2/0 3/0 4/0 250 350 500
SIZE AWG
10 10 8 7 6 5 4 2 2 2
1/0 2/0
NO. OF
WIRES PER CONDUCTOR
133 259 259 259 259 266 323 418 532 627 888
1221
NO. OF
WIRES PER CONDUCTOR
49 49
133 133 133 133 259 259 259 259 266 323
INSULATION THICKNESS
MILS
60 60 60 60 80 80 80 80 80 95 95 95
NOMINAL OUTSIDE
DIMENSIONS IN.
1.097 1.105 1.168 1.357 1.470 1.600 1.692 1.920 2.019 2.306 2.580 2.935
SIZE AWG
10 10 10 10 8 8 8 8 8 8 8 8
APPROX. WEIGHT LBS. PER 1,000 FT.
649 770 982
1404 1764 2093 2450 3084 3663 4442 6073 7929
AMPACITY* 30°C
AMBIENT TEMP
65 87
114 152 177 205 237 274 316 352 433 536
37-442-
008 006 004 002 001 010 020 030 040 250 350 500
GROUNDING CONDUCTORS GROUND CHECK
POWER CONDUCTORS
1 Jacket – Heavy-Duty (HD) black CPE is standard. Colored HD CPE jackets available upon request. 2 Ground Check Conductor – Minimum 49 strands (7X7). EP insulation for EASY STRIPABILITY.
.030" minimum average insulation for 10 AWG.
.045" minimum average insulation for 8 AWG *Ampacity – Based on continuous duty at 90°C conductor temperature.
350 Bailey Road • El Dorado, Arkansas USA • www.AmerCable.nexans.com • e-mail: industrial.sales@nexans.com1_17
37-443
TYPE G 4/C HIGHLY DURABLE EASY-STRIP JACKET 2000 VOLTS
FEATURES � Highly durable, abrasion-resistant CPE jacket specially designed
and cured for easy stripping � Outstanding Nexans AmerCable engineering support
APPLICATION Manufactured for use with static or slow-moving industrial equipment, including light-duty mining applications, or three-phase AC systems which require a ground. Nexans AmerCable INDUSTRIAL GRADE Type G features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation.
Recommended maximum continuous conductor temperature is 90°C. Suitable for shallow water submersion when correctly terminated and sealed.
Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
Nexans AmerCable INDUSTRIAL GRADE Cable meets or exceeds CSA C 22.2 #96, ASTM B-172 and B-3.
RATINGS & APPROVALS � Mine Safety & Health Administration (MSHA)
� Pennsylvania Department of Environmental Protection � UL listed Type G meeting requirements of UL 1650
and UL portable power cable file E97865
INSULATION 90°C ethylene-propylene rubber (EPR)
JACKET1 Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking: AMERCABLE (UL) TYPE G [SIZE] 4/C 90C WET OR DRY 2000V SUN RES OIL RESISTANT 60C -40C FT5 [MSHA]
CONDUCTORS Bare copper
GROUND WIRES (4) Bare copper insulated with green EP1140
________
1 Jacket – Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request. *Ampacity – Based on continuous duty at 90°C conductor temperature, with not more than three current carrying conductors.
SIZE AWG
8 6 4 2 1
1/0 2/0 3/0 4/0 250 350 500
SIZE AWG
12 12 10 8 8 7 6 5 4 3 2
1/0
NO. OF
WIRES PER CONDUCTOR
133 133 259 259 259 266 323 418 532 627 888
1221
INSULATION THICKNESS
MILS
60 60 60 60 80 80 80 80 80 95 95 95
NOMINAL OUTSIDE
DIMENSIONS IN.
1.109 1.165 1.309 1.445 1.630 1.803 1.915 2.080 2.215 2.590 2.900 3.300
APPROX. WEIGHT LBS. PER 1,000 FT.
754 913
1214 1728 2164 2614 3139 3766 4583 6028 7674
10797
37-443-
008BC 006BC 004BC 002BC 001BC 010BC 020BC 030BC 040BC 250BC 350BC 500BC
GROUNDING CONDUCTORSPOWER CONDUCTORS
Specially Designed &
Cured CPE Jacket for Easier, Faster
Stripping!
NO. OF WIRES PER
CONDUCTOR
19 19 49
133 133 133 133 133 259 259 259 266
CSA constructions
available upon request
AMPACITY* 30°C
AMBIENT TEMP
65 87
114 152 177 205 237 274 316 352 433 536
Manufactured by Nexans AmerCable • (870) 862-4919 • (800) 643-1516 • Fax (870) 862-9613
37-401
TYPE W 1/C PORTABLE POWER•EASY-STRIP JACKET 2000 VOLTS
FEATURES � Highly durable, abrasion-resistant CPE jacket specially designed
and cured for easy stripping � Outstanding Nexans AmerCable engineering support
APPLICATION Manufactured for heavy-duty or temporary power supply service, AC or DC, to motor or generator, portable and stationary heavy-duty equipment, cranes, conveyors and other mobile equipment applications. Nexans AmerCable INDUSTRIAL GRADE Type W features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation.
Recommended maximum continuous conductor temperature is 90°C. Suitable for installation in air, ducts, shallow water or direct burial.
Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-381/ NEMA WC-58.
RATINGS & APPROVALS � Mine Safety & Health Administration (MSHA) � Pennsylvania Department of Environmental Protection � UL listed Type W meeting requirements of UL 1650
and UL portable power cable file E97865
INSULATION 90°C ethylene-propylene rubber (EPR)
JACKET1 Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking: AMERCABLE (UL) TYPE W [SIZE] 1/C 90C WET OR DRY 2000V SUN RES OIL RESISTANT 60C -40C FT5 [MSHA]
CONDUCTORS Bare copper
SEPARATOR For easy stripping of insulation
Specially Designed &
Cured CPE Jacket for Easier, Faster
Stripping!
________
CSA constructions
available upon request
350 Bailey Road • El Dorado, Arkansas USA • www.AmerCable.nexans.com • e-mail: industrial.sales@nexans.com
1 Jacket – Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request.
SIZE AWG
8 6 4 2 1
1/0 2/0 3/0 4/0 250 350 500
NO. OF
WIRES PER CONDUCTOR
133 133 259 259 259 266 323 418 532 627 888
1221
INSULATION THICKNESS
MILS
60 60 60 60 80 80 80 80 80 95 95 95
NOMINAL OUTSIDE
DIMENSIONS IN.
0.448 0.522 0.584 0.655 0.731 0.780 0.830 0.896 0.956 1.025 1.155 1.300
APPROX. WEIGHT LBS. PER 1,000 FT.
137 196 264 360 467 542 635 780 929
1097 1472 1965
37-401-
008BC 006BC 004BC 002BC 001BC 010BC 020BC 030BC 040BC 250BC 350BC 500BC
AMPACITY* 30°C
AMBIENT TEMP
80 105 140 190 220 260 300 350 405 455 570 700
TYPE W 1/C
Manufactured by Nexans AmerCable • (870) 862-4919 • (800) 643-1516 • Fax (870) 862-9613
37-430/31
TYPE W 2-3/C PORTABLE POWER•EASY-STRIP JACKET 600/2000 VOLTS
FEATURES � Highly durable, abrasion-resistant CPE jacket specially designed
and cured for easy stripping � Outstanding Nexans AmerCable engineering support
APPLICATION Manufactured for heavy-duty or temporary power supply service, AC or DC, to motor or generator, portable and stationary heavy-duty equipment, cranes, conveyors and other mobile equipment applications. Nexans AmerCable INDUSTRIAL GRADE Type W features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation.
Recommended maximum continuous conductor temperature is 90°C. Suitable for installation in air, ducts, shallow water or direct burial.
Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-381/ NEMA WC-58.
RATINGS & APPROVALS � Mine Safety & Health Administration (MSHA) � Pennsylvania Department of Environmental Protection � UL listed Type W meeting requirements of UL 1650
and UL portable power cable file E97865
INSULATION 90°C ethylene-propylene rubber (EPR)
JACKET1 Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking: AMERCABLE (UL) TYPE W [SIZE] #/C 90C WET OR DRY 2000V SUN RES OIL RESISTANT 60C -40C FT5 [MSHA]
CONDUCTORS Bare copper
SEPARATOR For easy stripping of insulation
Specially Designed &
Cured CPE Jacket for Easier, Faster
Stripping!
________
CSA constructions
available upon request
350 Bailey Road • El Dorado, Arkansas USA • www.AmerCable.nexans.com • e-mail: industrial.sales@nexans.com
TYPE W 2/C
SIZE AWG
8 6 4 2 1
1/0 2/0 3/0 4/0 250 350 500
NO. OF
WIRES PER CONDUCTOR
133 133 259 259 259 266 323 418 532 627 888
1221
INSULATION THICKNESS
MILS
60 60 60 60 80 80 80 80 80 95 95 95
NOMINAL OUTSIDE
DIMENSIONS IN.
.831
.904 1.028 1.222 1.419 1.509 1.605 1.749 1.901 2.004 2.300 2.620
APPROX. WEIGHT LBS. PER 1,000 FT.
362 459 624 941
1245 1443 1682 2059 2471 2830 3839 5158
37-430-
008BC 006BC 004BC 002BC 001BC 010BC 020BC 030BC 040BC 250BC 350BC 500BC
POWER CONDUCTORS AMPACITY* 30°C
AMBIENT TEMP
74 99
130 174 202 234 271 313 361 402 495 613
1 Jacket – Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request. *Ampacity – Based on continuous duty at 90°C conductor temperature, with not more than three current carrying conductors.
TYPE W 3/C
SIZE AWG
8 6 4 2 1
1/0 2/0 3/0 4/0 250 350 500
NO. OF
WIRES PER CONDUCTOR
133 133 259 259 259 266 323 418 532 627 888
1221
INSULATION THICKNESS
MILS
60 60 60 60 80 80 80 80 80 95 95 95
NOMINAL OUTSIDE
DIMENSIONS IN.
.942 1.020 1.121 1.292 1.470 1.609 1.702 1.857 2.020 2.310 2.580 2.936
APPROX. WEIGHT LBS. PER 1,000 FT.
516 644 843
1225 1545 1881 2172 2669 3195 4049 5334 7218
37-431-
008BC 006BC 004BC 002BC 001BC 010BC 020BC 030BC 040BC 250BC 350BC 500BC
POWER CONDUCTORS AMPACITY* 30°C
AMBIENT TEMP
65 87
114 152 177 205 237 274 316 352 433 536
*Ampacity – Based on continuous duty at 90°C conductor temperature, with not more than two current carrying conductors.
Manufactured by Nexans AmerCable • (870) 862-4919 • (800) 643-1516 • Fax (870) 862-9613
37-432/33
TYPE W 4-5/C PORTABLE POWER•EASY-STRIP JACKET 2000 VOLTS
FEATURES � Highly durable, abrasion-resistant CPE jacket specially designed
and cured for easy stripping � Outstanding Nexans AmerCable engineering support
APPLICATION Manufactured for heavy-duty or temporary power supply service, AC or DC, to motor or generator, portable and stationary heavy-duty equipment, cranes, conveyors and other mobile equipment applications. Nexans AmerCable INDUSTRIAL Type W features a reinforced jacket that is specially designed and cured for easy stripping and cable preparation.
Recommended maximum continuous conductor temperature is 90°C. Suitable for installation in air, ducts, shallow water or direct burial.
Cable carries MSHA marking indicating listing by the Mine Safety and Health Administration and the Pennsylvania Department of Environmental Protection.
Nexans AmerCable INDUSTRIAL GRADE cable meets or exceeds the material requirements of ICEA Standards S-75-381/NEMA WC-58.
RATINGS & APPROVALS � Mine Safety & Health Administration (MSHA) � Pennsylvania Department of Environmental Protection � UL listed Type W meeting requirements of UL 1650
and UL portable power cable file E97865
INSULATION 90°C ethylene-propylene rubber (EPR)
JACKET1 Black thermosetting Chlorinated Polyethylene (CPE) Jacket cured for easy stripping and cable preparation. Cable identification via permanent marking: AMERCABLE (UL) TYPE W [SIZE] #/C 90C WET OR DRY 2000V SUN RES OIL RESISTANT 60C -40C FT5 [MSHA]
CONDUCTORS Bare copper
SEPARATOR For easy stripping of insulation
Specially Designed &
Cured CPE Jacket for Easier, Faster
Stripping!
________
CSA constructions
available upon request
350 Bailey Road • El Dorado, Arkansas USA • www.AmerCable.nexans.com • e-mail: industrial.sales@nexans.com
TYPE W 4/C
SIZE AWG
8 6 4 2 1
1/0 2/0 3/0 4/0 250 350 500
NO. OF
WIRES PER CONDUCTOR
133 133 259 259 259 266 323 418 532 627 888
1221
INSULATION THICKNESS
MILS
60 60 60 60 80 80 80 80 80 95 95 95
NOMINAL OUTSIDE
DIMENSIONS IN.
1.020 1.105 1.221 1.380 1.609 1.765 1.868 2.038 2.185 2.660 2.955 3.400
APPROX. WEIGHT LBS. PER 1,000 FT.
617 795
1010 1501 1949 2363 2795 3350 4048 5420 7305 9682
37-432-
008BC 006BC 004BC 002BC 001BC 010BC 020BC 030BC 040BC 250BC 350BC 500BC
POWER CONDUCTORS AMPACITY* 30°C
AMBIENT TEMP
65 87
114 152 177 205 237 274 316 352 433 536
TYPE W 5/C
1 Jacket – Black Heavy-Duty (HD) CPE is standard. Colored HD CPE jackets available upon request. *Ampacity – Based on continuous duty at 90°C conductor temperature, with not more than three current carrying conductors.
SIZE AWG
8 6 4 2 1
1/0 2/0 3/0 4/0
NO. OF
WIRES PER CONDUCTOR
133 133 259 259 259 266 323 418 532
INSULATION THICKNESS
MILS
60 60 60 60 80 80 80 80 80
NOMINAL OUTSIDE
DIMENSIONS IN.
1.068 1.204 1.400 1.614 1.895 2.029 2.145 2.340 2.535
APPROX. WEIGHT LBS. PER 1,000 FT.
690 999
1377 1975 2679 3038 3569 4325 5287
37-433-
008BC 006BC 004BC 002BC 001BC 010BC 020BC 030BC 040BC
POWER CONDUCTORS AMPACITY* 30°C
AMBIENT TEMP
65 87
114 152 177 205 237 274 316
INDUSTRIAL GRADE HIGHLY DURABLE, EASY STRIPPING POWER CABLES
Nexans AmerCable 350 Bailey Road • El Dorado, AR USA 800-643-1516 • 870-862-4919 • Fax: 870-862-8659 email: industrial.sales@nexans.com www.AmerCable.nexans.com © 2020, AmerCable Incorporated 9_20
Nexans AmerCable is an ISO 9001 certified cable manufacturer that combines leading-edge manufacturing technology, innovative thinking, and high quality service to deliver the finest industrial cable products available.
Our professional engineers and sales force work with you to create innovative, cost effective project solutions.
FOLLOW US!
Recommended