Hydraulic Winches AMB206-AMB207 - tesmec.com · AMB206 1110 1450 1000 AMB207 1020 Tesmec S.p.A....

AMB206

1110

1450

1000

AMB207

1020Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445

Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375

Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562

Ed. 2015/2016

Keep you updated on: www.tesmec.com

PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE

ISO 9001:2008Certified Quality System

Hydraulic WinchesAMB206-AMB207

Hydraulic winch designed for tower erection, for stringing operations of low and medium voltage overhead lines and for any lifting work.The winch is available in 2 versions: with 2 side capstans (Mod. AMB206) or with 1 side capstan and 1 drum with automatic level wind (Mod. AMB207).

PerformanceMax pull 15 kNSpeed at max pull 0.35 km/hMax speed 2.4 km/hPull at max speed 5 kN

Drum SpecificationsExternal diameter 378 mmInternal diameter 220 mmWidth 200 mmCapacity 185 m rope Ø 8 mm

ConfigurationNegative self-acting hydraulic brake

EngineGasoline 8.1 kW (11 hp)Cooling system airElectrical system 12 V

Hydraulic TransmissionClosed hydraulic circuit for stepless speed variation in both rotating directions.

Note: the basic machine performance is calculated at 20°C and at sea level

Available Devices

ALL102 Pulling rope locking device when capstan is used (compulsory for EC market)

ALL105 Rigid axle and towing bardetachable, for manual towing

Capstan SpecificationsDiameter 225 mm

CharacteristicsMass (Mod. AMB206) 300 kgMass (Mod. AMB207) 320 kg