View
229
Download
5
Category
Preview:
Citation preview
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-MIT01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEMITSUbIShI ECLIPSE
bASE 2006-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi eclipse base 2006-2012
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi eclipse base 2006-2012
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
35 34 33 32 3138 37 3641 40 39
52 51 50 46 45 44 43 4249 48 47
A
HG
A
2
G
H
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C - LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 2
STEP 3
WIRING DIAGRAM
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi eclipse base 2006-2012
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Black (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 22 pin 31 Green/Orange (DATA) Behind radio
SWI Feed C ~ 22 pin 42 Green/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-MIT01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEMITSUbIShI ENDEAvOR
bASE 2007-2011retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi endeavor base 2007-2011
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi endeavor base 2007-2011
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
35 34 33 32 3138 37 3641 40 39
52 51 50 46 45 44 43 4249 48 47
A
HG
A
2
G
H
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C - LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 2
STEP 3
WIRING DIAGRAM
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi endeavor base 2007-2011
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Black (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 22 pin 31 Green/Orange (DATA) Behind radio
SWI Feed C ~ 22 pin 42 Green/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-MIT01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEMITSUbIShI GALANT
bASE 2006-2012retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi galant base 2006-2012
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi galant base 2006-2012
Automotive Data Solutions Inc. © 2014 3
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
35 34 33 32 3138 37 3641 40 39
52 51 50 46 45 44 43 4249 48 47
A
HG
A
2
G
H
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
C - LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
STEP 2
STEP 3
WIRING DIAGRAM
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi galant base 2006-2012
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Red (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Black (DATA) OBDII connector, under driver side dash
SWI 1 C ~ 22 pin 31 Green/Orange (DATA) Behind radio
SWI Feed C ~ 22 pin 42 Green/Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-MIT01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEMITSUbIShI LANCER
bASE 2008retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi lancer base 2008
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi lancer base 2008
Automotive Data Solutions Inc. © 2014 3
3 4 5 61 2
17 18 19 20
7 8
15 1611 12 13 14
9 10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
A
HG
A
G
H
1
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B - LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi lancer base 2008
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Pink (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 White (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 02 Blue (DATA) Behind radio
SWI Feed B ~ 20 pin 12 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-MIT01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEMITSUbIShI LANCER
bASE 2009-2013retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi lancer base 2009-2013
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi lancer base 2009-2013
Automotive Data Solutions Inc. © 2014 3
3 4 5 61 2
17 18 19 20
7 8
15 1611 12 13 14
9 10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
A
HG
A
G
H
1
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B - LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi lancer base 2009-2013
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow/Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Violet (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 02 Blue (DATA) Behind radio
SWI Feed B ~ 20 pin 12 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-MIT01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEMITSUbIShI OUTLANDER
bASE 2007-2014retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi outlander base 2007-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi outlander base 2007-2014
Automotive Data Solutions Inc. © 2014 3
3 4 5 61 2
17 18 19 20
7 8
15 1611 12 13 14
9 10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
A
HG
A
G
H
1
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B - LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi outlander base 2007-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow/Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Violet (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 02 Blue (DATA) Behind radio
SWI Feed B ~ 20 pin 12 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-MIT01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEMITSUbIShI OUTLANDER SPORT
bASE 2011-2014retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi outlander sport base 2011-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi outlander sport base 2011-2014
Automotive Data Solutions Inc. © 2014 3
3 4 5 61 2
17 18 19 20
7 8
15 1611 12 13 14
9 10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
A
HG
A
G
H
1
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B - LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi outlander sport base 2011-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow/Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Violet (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 02 Blue (DATA) Behind radio
SWI Feed B ~ 20 pin 12 Black (-) Behind radio
OPTIONAL ACCESSORIESNone
PROGRAMMED FIRMWAREADS-RR(SI)-MIT01-DS
PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Compatible Radio
INSTALL GUIDEMITSUbIShI RvRbASE 2011-2014
retains steering wheel controls and adds gauges
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi rvr base 2011-2014
Automotive Data Solutions Inc. © 2014 2
WELCOME
NEED hELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
1 866 427-2999
support@idatalink.com
maestro.idatalink.com/supportwww.12voltdata.com/forum
TAbLE OF CONTENTS
Wiring Diagram 3
Vehicle Wire Reference Chart 4
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi rvr base 2011-2014
Automotive Data Solutions Inc. © 2014 3
3 4 5 61 2
17 18 19 20
7 8
15 1611 12 13 14
9 10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
A
HG
A
G
H
1
NOT CONNECTED
MAESTRO RR MODULE
CONNECT TOAFTERMARKET RADIO
B - LOCATED BEHIND RADIO
SWI 1SWI 1
SWI FEEDSWI FEED
PURPLE/RED - PURPLE/RED - SWI CIRCUIT 1 INPUT
BLACK/WHITE - BLACK/WHITE - SWI GROUND FEED (-) OUTPUT
WIRES FROMVEHICLE
WIRING DIAGRAM
STEP 2
STEP 3
STEP 4NOT CONNECTED
YELLOW - 12V (+) INPUT
BLACK - GROUND
GRAY/RED - ACCESSORY (+) INPUT
BLACKBLACK
REDRED
YELLOWYELLOW
OBDII CONNECTORLOCATED UNDER DRIVER SIDE DASH
NOTE: PIN SIDE VIEW. CONNECT TO TWISTED WIRES BEHIND CONNECTOR.
BROWN/RED - CANH
BROWN/YELLOW - CANL
STEP 1
CANHCANH
CANLCANL
ADS-RR(SI)-MIT01-DS maestro.idatalink.com
Mitsubishi rvr base 2011-2014
Automotive Data Solutions Inc. © 2014 4
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
CanH A ~ 16 pin 06 Yellow/Green (DATA) OBDII connector, under driver side dash
CanL A ~ 16 pin 14 Violet (DATA) OBDII connector, under driver side dash
SWI 1 B ~ 20 pin 02 Blue (DATA) Behind radio
SWI Feed B ~ 20 pin 12 Black (-) Behind radio
Recommended