View
228
Download
0
Category
Preview:
Citation preview
Operating Instructions
Hot-Runner Controller R0300 3-348-586-03Issue 1.13
Safety Features and PrecautionsThe R0300 controller is manufactured and tested in accordance with safety regulations IEC 61010-1 / DIN EN 61010-1 / VDE 0411-1.If used for its intended purpose, safety of the user and of the device is assured.
Read the operating instructions completely and carefully before using the device, and follow all instructions included therein. The operating instructions should be made available to all users.
Observe the following safety precautions:– The device may only be connected to electrical systems
which comply with the specified nominal range of use (see circuit diagram and serial plate), and which are protected with a fuse or circuit breaker with a maximum nominal current rating of 16 A.
– The installation must include a switch or a circuit breaker which serves as a disconnecting device.
The controller may not be used:– If visible damage is apparent– If it no longer functions flawlessly– After lengthy periods of storage under unfavorable conditions
(e.g. humidity, dust, temperature)In such cases the device must be removed from service and secured against any possible inadvertent use.
Maintenance
HousingNo special maintenance is required for the housing. Keep outside surfaces clean. Use a slightly dampened cloth for cleaning. Avoid the use of solvents, cleansers and abrasives.
Repair and Parts ReplacementRepair and replacement of parts conducted at a live open inst-rument may only be carried out by trained personnel who are familiar with the dangers involved.
Device Return and Environmentally Compatible DisposalThe R0300 is a category 9 product (monitoring and control inst-rument) in accordance with ElektroG (German Electrical and Elec-tronic Device Law). This device is not subject to the RoHS direc-tive.We identify our electrical and electronic devices (as of August 2005) in accordance with WEEE 2002/96/EG and ElektroG with the symbol shown to the right per DIN EN 50419.These devices may not be disposed of with the trash. Please contact our service department regarding the return of old devices.
Repair and Replacement Parts ServiceIf required please contact:
GMC-I Service GmbHService-Center Thomas-Mann-Str. 2090471 Nürnberg • GermanyPhone +49 911 817718-0Fax +49 911 817718-253E-Mail service@gossenmetrawatt.comwww.gmci-service.com
This address is only valid in Germany. Please contact our representatives or subsidiaries for service in other countries.
Product SupportIf required please contact:
GMC-I Messtechnik GmbHProduct Support Hotline Phone +49 911 8602-500Fax +49 911 8602-340E-Mail support@gossenmetrawatt.com
Printed in Germany • Subject to change without notice
GMC-I Messtechnik GmbH Südwestpark 15 90449 Nürnberg • Germany
Phone +49 911 8602-111Fax +49 911 8602-777E-Mail info@gossenmetrawatt.comwww.gossenmetrawatt.com
Recommended