Hand Tools. Tool vocabulary 1. Ratchets11.Ball peen hammer 21.Lug wrench 2. 1tubing wrench...

Hand ToolsHand Tools

Tool vocabularyTool vocabulary

1.1. RatchetsRatchets 11.Ball peen hammer 21.Lug wrench11.Ball peen hammer 21.Lug wrench

2.2. 1tubing wrench 12.Phillips/standard screw driver 22.Feeler Gauge1tubing wrench 12.Phillips/standard screw driver 22.Feeler Gauge

3.3. 2pt.& 6pt. Socket 13.Torx screw driver 23.Torque wrench2pt.& 6pt. Socket 13.Torx screw driver 23.Torque wrench

4.4. Shallow standard socket 14.Pipe wrench 24.Floor JackShallow standard socket 14.Pipe wrench 24.Floor Jack

5.5. ¼¼,3/8,1/2,3/4,&1” drive,3/8,1/2,3/4,&1” drive 15.Slip joint pliers 25.Brake Lathe15.Slip joint pliers 25.Brake Lathe

6.6. U jointU joint 16.Brake springs tools16.Brake springs tools

7.7. Extension 3”-6”-12”Extension 3”-6”-12” 15.files 17.Wire brush/scraper15.files 17.Wire brush/scraper 18.Punches 18.Punches

8.8. Adjustable wrench 19.Allen wrenchAdjustable wrench 19.Allen wrench

9.9. Tap and dies 20.Distributor wrenches Tap and dies 20.Distributor wrenches

10.10. Pullers Pullers

SocketsSockets

6 point shallow socket 12 point shallow socket

Deep socketsDeep sockets

6 point deep socket Deep impact socket

Spark plug socketSpark plug socket

Impact socket – std (shallow)Impact socket – std (shallow)

Ratchet – ½ DriveRatchet – ½ Drive

Breaker barBreaker bar

½ drive - 6” Extension½ drive - 6” Extension

Deep Impact Socket & Impact Deep Impact Socket & Impact GunGun

““U” joint , Torx socket, Lug U” joint , Torx socket, Lug wrenchwrench

Speed handle

Combination WrenchCombination Wrench

Tubing wrenchTubing wrench

Torque WrenchTorque Wrench

Adjustable WrenchAdjustable Wrench

Pipe wrench & slip joint pliersPipe wrench & slip joint pliers

Pliers Pliers

Allen or Hex WrenchAllen or Hex Wrench

Brake Spring pliersBrake Spring pliers

Ball pien & Brass HammersBall pien & Brass Hammers

Soft Face & Dead blow Soft Face & Dead blow HammersHammers

Pin punch & Cold ChiselPin punch & Cold Chisel

Center punch & Brass DriftsCenter punch & Brass Drifts

Punch & chisel set

Tap & Die Tap & Die

Tap & Die SetTap & Die Set

Standard & Phillips Screw Standard & Phillips Screw DriversDrivers

Feeler GaugeFeeler Gauge

Mill File – smooth cutMill File – smooth cut

3 Jaw 3 Jaw PullerPuller

Spark plug gap GaugeSpark plug gap Gauge

Floor JackFloor Jack

2 ton rating

2 ton rating

Good luck on your unit Test!!Good luck on your unit Test!!

Some people have way to much time on their hands!