View
83
Download
3
Category
Preview:
Citation preview
11
INDUSTRIAL PLANTS AND
MODULES
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
2
INDUSTRY BUILDERS….EXPERTS IN PROVIDING INDUSTRIAL
SOLUTIONS
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
3
Business Areas
• Erection
• Mainteinance
• Engineering and Fabrication
INDUSTRY BUILDERSINDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
4
Turnover
INDUSTRY BUILDERSINDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
5
Turnover per Bussiness Area
(average)
INDUSTRY BUILDERSINDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
ERECTION
MAINTENANCE
6
International Activity: Branches
INDUSTRY BUILDERSINDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
• COTINAVEC CHILE
• COTINAVEC
COLOMBIA
• COTINAVEC MEXICO
• COTIINAVEC PERÚ
7
International Activity: Projects
INDUSTRY BUILDERSINDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
8
ENGINEERING AND
FABRICATION
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
99
EUROPEAN QUALITY
&
GLOBAL
COMPETITIVENESS
INDUSTRY BUILDERS
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
10
Current Products
• Pressure vessels
• Shell and tube heat exchangers
• Tanks
• Bulk handling systems
• Industrial plants and modules
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
11
Facilities
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
• Silvota industrial area
(Asturias) International market
• Gijón harbour industrial
area International market
• Tarragona Domestic market
• San Roque Domestic market
• Huelva Domestic market
• Cartagena Domestic market
• Sines (Portugal) Domestic market
SPAIN
12
36,000 yd2 workshops including special
alloys workshops.
• 30,000 yd2 covered.
• 6.000 yd2 Not covered.
SILVOTA INDUSTRIAL AREA:
(15,5 miles from
harbor)
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
13
Over 1.200 yd2
SILVOTA INDUSTRIAL AREA:
(15,5 miles from
harbor)
SPECIAL ALLOY
CLEAN SHOP
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
14
15.000 yd2
storage, fabrication,
final assembly and
tests.
GIJON HARBOUR INDUSTRIAL AREA:
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
15
• Detailed steel structure design including 3D models
• Detailed piping design including stress and flexibility analysis
• Pressure vessel complete mechanical design including FEA analysis
• Electrical and I&C complete design
• Thermal design for shell and tube heat exchangers
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
Engineering Capabilities
16
Engineering: SoftwareMODELIZING:• INTERGRAPH CADWORX PLANT
PROFESSIONAL 2014.• AUTOCAD 2013 – 2D / 3D.
VESSELS CALCULATIONS:• CODEWARE COMPRESS: VESSELS AND
HEAT EXCHANGERS CALCULATION ACCORDING ASME.
• COADE TANK: TANKS CALCULATION ACCORDING API 650 / 653.
• SAP 2000: TANK CALCULATION ACCORDING EUROCODES.
• ASPEN EDR: HEAT EXCHANGERS CALCULATION ACCORDING TEMA / ASME
• HTRI + CODEWARE COMPRESS: THERMAL + MECHANICAL
• PV ELITE: VESSEL MECHANICAL CALCULATION ACCORDING TO EN
17
PIPE CALCULATION:
• CAEPIPE: PIPE CALCULATION ACCORDING ASME B31.3.
STEEL STRUCTURE CALCULATION:
• SAP 2000: STRUCTURE CALCULATION ACCORDING EUROCODES AND ASCE / AISC.
JOINTS CALCULATION:
• PROKON: EUROCODES
• LIMCON:EUROCODES / AISC / …
Engineering: Software
18
PIPE DRAWINGS:
• INTERGRAPH CADWORX PLANT PROFESSIONAL 2014 PIPE ISOMETRICS.
VESSEL DRAWINGS:
• AUTOCAD 2013 – 2D / 3D: VESSELS, TANKS AND HEAT EXCHANGERS.
STEEL STRUCTURE DRAWINGS
• BOCAD 3D: 3D, ASSEMBLIES AND SMALLS STEELS DRAWINGS.
Engineering: Software
19
Our Staff
Administration & Management 20
Foremen 15
Engineering 60
Operators 150
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
20
• ISO 9001:2008
• ISO 14001:2004
• OSHAS 18001:2007
• ASME Stamp U (Since 2004)
• ASME Stamp U2 (Since 2004)
• ASME Stamp R (Since 2004)
• ASME Stamp S (Since 2004)
• TÜV Zertifikat
• EN 1090
• ISO 3834-2
• 97/23/EC Module H1
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
Our Quality
21
Our ProductsReactors, Pressure vessels,
Columns, Heat exchangers,
Tanks, …
Carbon steel, Alloy steel,
Stainless steel, Non ferrous,
Cladded steel, …
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
22
Our Products
Packaged and Skidded Units:
Separation, Filtration, Dosifying, Dehydration, Desalters, …
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
23
Our ProductsEPC Bulk Handling:
Belt conveyors, Bucket elevators,
Crushing plants, …
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
24
Highlighted references: Pressure vessels, Heat exchangers &
Tanks • Heavy wall vessels
• Cladded equipment
• Low alloy steels
• Exotic materials
• Cryogenic steels
• Stainless steels
• High yield strength steels
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
25
Capabilities: Fabrication engineering
expertise
• Heavy wall vessels
• Cladded equipment
• Low alloy steels
• Exotic materials
• Cryogenic steels
• Stainless steels
• High yield strength steels
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
26
ItemSeparator
10VA11001
Diameter 79’’
Total length 323’’
Weight (lbs) 150000
Thickness 5 1/8’’
MaterialDIROS 500 HT
(SA533) + 904L
Design code PD 5500
Client BP (Norway)
Engineering KANFA AS (Norway)
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Heavy wall vessels
27
Heavy wall vessels
Item
Dehydration outlet
gas filter
coalescer
Diameter 84’’
Weight (lbs) 95000
Thickness 4’’
Material SA516 Gr.70
Design code ASME VIII Div.1
ClientSonatrach/ GDF Suez
(Algeria)
EngineeringTécnicas Reunidas
(Spain)
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
28
Capabilities: Fabrication engineering
expertise
• Heavy wall vessels
• Cladded equipment
• Low alloy steels
• Exotic materials
• Cryogenic steels
• Stainless steels
• High yield strength steels
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
29
Cladded equipment
ItemStabilisation
Column T-101
Diameter 122’’
Total length 1236’’
Weight (lbs) 115000
Thickness 13/16’’
Material A516 GR70 + 316L
Design code ASME VIII Div.1 ED98
ClientBurlington Resources
(Algeria)
Engineering Entrepose (France)
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
30
Cladded equipment
Diameter (mm) 2,300
Total length (mm)
Weight (kg) 102,000
Thickness (mm) 18+4/18
Material SA516 GR70 + 340L
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
ItemVacuum Overhead
Seal Drum
Diameter 120’’
Total length 635’’
Weight (lbs) 70000
Thickness 9/16’’
MaterialSA516 +
INCOLOY825
Design code ASME VIII Div1 ED01
Client Sabic (Arabia Saudi)
Engineering INTECSA (Spain)
31
Cladded equipment
Diameter (mm) 2,300
Total length (mm)
Weight (kg) 102,000
Thickness (mm) 18+4/18
Material SA516 GR70 + 340L
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
ItemSour water
stripper 200 T01
Diameter 90’’
Total length 1719’’
Weight (lbs) 210000
Thickness 23/32’’
MaterialSA516 GR70 +
304L
Design codeASME VIII Div.1
ED2010
ClientOJSC NAFTAN
(Belarus)
Engineering Duro Felguera (Spain)
32
Capabilities: Fabrication engineering
expertise
• Heavy wall vessels
• Cladded equipment
• Low alloy steels
• Exotic materials
• Cryogenic steels
• Stainless steels
• High yield strength steels
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
33
Low alloy steels
Diameter (mm) 2,470
Total length (mm)
Weight (kg) 44,000
Thickness (mm)
Material A387 GR11
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Item
CSHS
Hydrogenation
reactor DP-C-02
Diameter 97’’
Total length 375’’
Weight (lbs) 90000
Thickness 3 3/8’’
Material A387 GR11
Design code ASME I ED95 ADD 96
ClientEastman Chemical
(Spain)
EngineeringINTECSA UHDE
(Spain)
34
Low alloy steels
Diameter (mm) 3200
Total length (mm)
Weight (kg) 44,905
Thickness (mm) 41,28
Material SA387 GR11
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Item
IST Stage Hot Low
Pressure
Separator (18-2C-
5)
Diameter 126’’
Total length 434’’
Weight (lbs) 92000
Thickness 1 5/8’’
Material SA387 GR11
Design code ASME VIII Div1 ED98
Client Syncrude (Canada)
Engineering ATB (Italy)
35
Capabilities: Fabrication engineering
expertise
• Heavy wall vessels
• Cladded equipment
• Low alloy steels
• Exotic materials
• Cryogenic steels
• Stainless steels
• High yield strength steels
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
36
Exotic materials
Diameter (mm)
Total length (mm)
Weight (kg)
Thickness (mm)
Material
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Item Vent Scrubber
Diameter 83’’
Total length 674’’
Weight (lbs) 25000
Thickness 7/16’’
Material SB575
Design code ASME VIII Div1 ED04
Client Sabic (Arabia Saudi)
Engineering INTECSA (Spain)
37
Exotic materials
Diameter (mm)
Total length (mm)
Weight (kg)
Thickness (mm)
Material
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Item Flash Drum
Diameter 89’’
Total length 255’’
Weight (lbs) 15000
Thickness 3/8’’
Material SB575
Design code ASME VIII Div1 ED04
Client Sabic (Arabia Saudi)
Engineering INTECSA (Spain)
38
Exotic materials
Diameter (mm)
Total length (mm)
Weight (kg)
Thickness (mm)
Material
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
ItemTOP REFLUX TRIM
COOLER LV-E-8 (2 off)
Diameter 32’’
Total length 300’’
Weight (lvs) 35000
ThicknessShell: 9/16’’
Tube: BWG16
Material
Shell: A285 Gr.C
Tube: B395-CD443
(Admiralty)
Tube sheet: A516 Gr,60
Design code ASME VIII Div1
Client CEPSA (Spain)
Engineering COMAD (Spain)
Shell and tube heat exchanger
39
Exotic materials
Diameter (mm) 3200
Total length (mm)
Weight (kg) 44,905
Thickness (mm) 41,28
Material SA387 GR11
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Item C3-E-26A (3 off)
Diameter 34 1/64’’
Total length 344 57/64’’
Weight (lbs) 56000
ThicknessShell: 1/2’’
Tube: BWG 16
Material
Shell: A285 Gr.C
Tube: SB-163-400
(Monel)
Tube sheet: SB-127-
400 (Monel)
Design code ASME VIII Div1
Client CEPSA (Spain)
Engineering INTECSA (Spain)
Shell and tube heat exchanger
40
Capabilities: Fabrication engineering
expertise
• Heavy wall vessels
• Cladded equipment
• Low alloy steels
• Exotic materials
• Cryogenic steels
• Stainless steels
• High yield strength steels
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
41
Cryogenic steel
ItemCold separator (2
off)
Diameter 134’’
Total length 460’’
Weight (lbs) 341000
Thickness 3 3/4’’
Material SA 203 F
Design codeASME VIII Div.1
ED2010
Client YPFB (Bolivia)
EngineeringTécnicas Reunidas
(Spain)
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
42
Capabilities: Fabrication engineering
expertise
• Heavy wall vessels
• Cladded equipment
• Low alloy steels
• Exotic materials
• Cryogenic steels
• Stainless steels
• High yield strength steels
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
43
Stainless steel
Diameter (mm)
Total length (mm)
Weight (kg)
Thickness (mm)
Material
Design code
Client
Engineering
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Item Stripper/ Rectifier
Diameter 126’’
Total length 1694’’
Weight (lbs) 203000
Thickness 9/16’’ / 1’’
Material A240 TP304
Design codeASME VIII Div.1
ED2004
Client ABENER (Spain)
Engineering AB Bioenergy (France)
44
Stainless steel
Diameter (mm)
Total length (mm)
Weight (kg)
Thickness (mm)
Material
Design code
Client
Engineering
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Item 4 Air chillers
Diameter 166’’
Total length 424’’
Weight (lbs) 450000
Thickness 3/8’’ / 1’’
Material A240 TP316
Design codeASME VIII Div.1
ED2013
ClientUTE-DAP-NPK
(Saudi Arabia)
Engineering INTECSA (Spain)
45
Stainless steel
Diameter (mm)
Total length (mm)
Weight (kg)
Thickness (mm)
Material
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
ItemOsmotized Water
Tank
Diameter 631’’
Total length 624’’
Weight (lbs) 173000
Thickness 3/8’’
Material A240 304
Design code API 650
ClientHASSI R´MEL
Construction (Argelia)
Engineering UTE ABENER (Spain)
46
Capabilities: Fabrication engineering
expertise
• Heavy wall vessels
• Cladded equipment
• Low alloy steels
• Exotic materials
• Cryogenic steels
• Stainless steels
• High yield strength steels
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
47
High yield strength steels
Diameter (mm)
Total length (mm)
Weight (kg)
Thickness (mm)
Material
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
Item Filter Unit
Diameter 51’’
Total length 184’’
Weight (lbs) 37000
Thickness 2 11/16’’
MaterialEN1028-3 P460
N22
Design code PD5500 ED03
Client STATOIL (Norway)
Engineering KANFA AS (Norway)
48
High yield strength steels
Diameter (mm)
Total length (mm)
Weight (kg)
Thickness (mm)
Material
Design code
Client
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
ItemFeed gas particle
filter
Diameter 103’’
Weight (lbs) 138000
Thickness 3 9/16’’
Material S533 B2 + SS316L
Design code ASME VIII Div.1
ClientSonatrach/ GDF Suez
(Algeria)
EngineeringTécnicas Reunidas
(Spain)
49
Our References: Packaged units
• Separation packages
• Dosing and injection
packages
• Filtration packages
• Other process
packages
50
Our References: Packaged units
• Separation packages
• Dosing and injection
packages
• Filtration packages
• Other process
packages
51
Inlet HP Separator
• 3 PHASE SEPARATOR
• CLIENT: PDVSA
• CODE: ASME VIII Div1
• DESIGN VALUES
– P = 230 PSI
– T = -20 to 230 ºF
• VESSEL SIZE
– Length = 984’’
– Weight = 250000 lbs
– Diameter = 168’’
• SCOPE OF SUPPLY
– Basic engineering
– Detail engineering
– Procurement
– Manufacturing
52
Bi-Phasic Separator
• 2 PHASE SEPARATOR
• CLIENT: PDVSA
• CODE: ASME VIII Div1
• DESIGN VALUES
– P = 740 PSI
– T = -20 to 100 ºF
• VESSEL SIZE
– Length = 505’’
– Weight = 69000 lbs
– Diameter = 168’’
• SCOPE OF SUPPLY
– Basic engineering
– Detail engineering
– Procurement
– Manufacturing
53
Our References: Packaged units
• Separation packages
• Dosing and injection
packages
• Filtration packages
• Other process
packages
54
Corrosion Inhibitor Dosing
• CLIENT: PDVSA
• VESSEL SIZE
– Diameter = 118’’
– Volume = 52 yd3
– Flow rate = 40 l/h
• SCOPE OF SUPPLY
– Basic engineering
– Detail engineering
– Procurement
– Manufacturing
55
Our References: Packaged units
• Separation packages
• Dosing and injection
packages
• Filtration packages
• Other process
packages
56
Filtration Packages:
• Particulate filters: from 0.3 µm to >100µm
• Liquid/ gas coalescer: Guarantee of a
downstream liquid content down to <0.01 ppm
• Liquid / liquid coalescer: Guarantee of a
downstream liquid content <15ppm vol.
• Special Taylor-made designs
57
Touatgaz Project
• 18 FILTRATION UNITS
• END USER: SONATRACH/GDF SUEZ
(Algeria)
• CLIENT: TECNICAS REUNIDAS (Spain)
• SCOPE OF SUPPLY:
- Process design (PALL)
- Mechanical design
- Procurement (filtration elements by PALL)
- Manufacturing
58
Number 1 2 3 4 5 6
Housing
description
BOOSTER
COMPRESSOR
DISCHARGE
COALESCER
BYPASS
PARTICLES
FILTER
FEED GAS
PARTICLE
FILTER
FEED GAS
COALESCER
DEHYDRATION
OUTLET GAS
FILTER
COALESCER
PARTICLE
FILTER
Fluid Natural gas Wet sour gas Raw feed gas Raw feed gas Dehydration gas Condensate
Application
description
Mercury guard
protection
Downstream
H2S removal
vessel
Downstream
equipment
protection
Downstream
glicol contractor
LL condensate
protection
Water removal
from condensate
Nature of
contaminationWater
Iron carbonates
and fines
Iron carbonates
and finesCondensate HC & TEG Not specified
Flange
pressure rating900 900 900 900 900 300
Material of
constructionCS+SS316L CS+SS316L
CS+SS316L
OR
SA-533-B-
2+SS316L
CS+SS316L
OR
SA-533-B-
2+SS316L
CS Super duplex
Diameter 56’’ 15’’ 103’’ 84’’ 7’’ 15’’
Type of filter
mediumCoalescer media Depth Coalescer media Coalescer media Coalescer media Depth
Touatgaz Project
59
Touatgaz ProjectNumber 7 8 9 10 11 12
Housing
description
CONDENSATE
FILTER
COALESCER
HOT OIL
FILTER
HOT OIL DRAIN
FILTER
METHANOL
FILTER
METHANOL
DRUM FILLING
FILTER
TEG FILTER
Fluid CondensateTorada TC hot
oil
Torada TC hot
oilMethanol Methanol TEG
Application
description
Water removal
from condensate
Solid removal
from hot oil loop
Solid removal
from hot oil loop
Solid removal
from methanol
loop
Solid removal
from methanol
loop
Solid removal
from TEG loop
Nature of
contamination
Water removal
from condensateNot specified Not specified Not specified Not specified Not specified
Flange
pressure rating300 300 150 900 150 150
Material of
constructionSuper duplex CS CS CS CS CS
Diameter (mm) 15’’ 10’’ 10’’ 4’’ 4’’ 7’’
Type of filter
mediumCoalescer Pleated Pleated Depth Depth Pleated depth
60
Touatgaz ProjectNumber 13 14 15 16 17 18
Housing
descriptionSAND FILTER SAND FILTER SAND FILTER SAND FILTER SAND FILTER SAND FILTER
Fluid Condensate Water Condensate Water Condensate water
Application
description
Solid removal
from condensate
Solid removal
from water
Solid removal
from condensate
Solid removal
from water
Solid removal
from condensate
Solid removal
from water
Nature of
contaminationSand Sand Sand Sand Sand Sand
Flange
pressure rating900 900 600 600 600 600
Material of
constructionSuper duplex Super duplex Super duplex Super duplex Super duplex Super duplex
Diameter (mm) 7’’ 4’’ 6’’ 4’’ 6’’ 4’’
Type of filter
mediumDepth Depth Depth Depth Depth Depth
61
Our References: Packaged units
• Separation packages
• Dosing and injection
packages
• Filtration packages
• Other process
packages
62
NOMEX Fiber Wash Draw
Systems• WASH DRAW TANKS
• CLIENT: DUPONT/ FLUOR
• CODE: API 650
• DESIGN VALUES
– P = 740 PSI
– T = -20 to 100 ºF
• DIMENSIONS
– Weight = 21000 lbs
• SCOPE OF SUPPLY
– Basic engineering
– Detail engineering
– Procurement
– Manufacturing
63
HIGHLIGHTED ONGOING
JOBS
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Maintenance
Applied Engineering
64
YARA BAMBOO Project
CLIENT Técnicas Reunidas
END USER YARA (Norway)
PROJECT BAMBOO
ITEMS Ammonia filters (2 off)
DESIGN CODE EN 13455
MATERIAL P355 NL1
65
JOHAN SVERDRUP Project
CLIENT Fjords Processing
END USER STATOIL (Norway)
PROJECT Johan Sverdrup
ITEMS TEG Package vessels and Heat exchanger
DESIGN CODE EN 13455
MATERIAL Carbon steel, Staintles steel & Duplex
66
FORT HILLS Project
CLIENT Técnicas Reunidas
END USER SUNCOR (Canada)
PROJECT Cogeneration package Fort Hills
ITEMS Vessels (6 off)
DESIGN CODE ASME + ABSA
MATERIAL Carbon steel
67
GHANA OCTP Project
CLIENT KANFA (Norway)
END USER ENI
PROJECT GHANA OCTP Offshore FPSO
ITEMS Heat exchangers (2 off)
DESIGN CODE ASME + TEMA
MATERIAL Carbon steel & Stainless steel
68
WATEWATER SYSTEM
UPGRADE Project
CLIENT INTECSA (Spain)
END USER SAUDI KAYAN
PROJECT SK Waterwaste treatment wywtem upgrade
ITEMS Sludge Hopper (1 off)
DESIGN CODE ASME
MATERIAL Carbon steel
69
SOLMICO PHASE II
REFINERY Project
CLIENT SOLMICO
END USER SOLMICO (Colombia)
PROJECTSOLMICO PHASE II REFINERY, BARRANQUILLA
(Colombia)
ITEMS 7 COLUMNS
DESIGN CODE ASME
MATERIAL Carbon steel
70
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
Our Customers
71
YOUR IDEAL PARTNER
• EUROPEAN QUALITY AND GLOBAL COMPETITIVENESS
• BIG ENOUGH TO HANDLE IMPORTANT PROJECTS
• SMALL ENOUGH TO KEEP FLEXIBILITY, FLUENT COMMUNICATION
WITH COSTUMERS AND PROJECT COMMITTMENT
• SKILLED ENGINEERING STAFF IN ALL DISCIPLINES
• DIRECT ACCESS TO THE SEA FROM OUR FACILITIES
INDUSTRY BUILDERS
INDUSTRY BUILDERS
Engineering and Fabrication
Construction
Mainteinance
Applied Engineering
Recommended