View
241
Download
9
Category
Tags:
Preview:
DESCRIPTION
View our full lineup of rental equipment
Citation preview
Your #1 Source for Everything Under ConstructionEquipment • Parts • Service • Rentals
www.grofftractor.com
Rent
al E
quip
men
tCl
ean,
wel
l mai
ntai
ned
equi
pmen
t N
ewer
mod
els
W
ide
sele
ctio
n
Varie
ty o
f atta
chm
ents
2
www.grofftractor.com
Your #1 Source for Everything Under ConstructionEquipment • Parts • Service • Rentals
Rates subject to change based on market conditions and availability
DeliveryRates are quoted FOB Groff Tractor & Equipment, Inc.
TaxesAll rates are subject to local state tax.
RatesDaily Maximum Machine Hours = 8Weekly Maximum Machine Hours = 40Monthly Maximum Machine Hours = 176
Hours used in excess of maximum hours allowed will be charged in proportion to the rate contracted.
Customer Responsibility1. Provides qualified operator.2. Ensures that normal daily maintenance is performed,
including changing oil, grease, filters, etc.3. Accepts liability for maintenance expense due to abnormal
wear and/or damage to machine, tires, bucket and teeth.4. Returns the machine in clean condition or pays a minimum
additional charge of $85.00 per hour for equipment cleaning.
FuelMachine must be returned with a full tank of fuel, as received, or pay for fuel used.
InsurancePrior to release of machine, Renter shall provide a "Certificate of Insurance" naming Groff Tractor & Equipment, Inc. as "Loss Payee" under the equipment floater policy for dual protection against physical damage and "Additional Insured" under the general liability policy, as approved by Groff Tractor & Equipment, Inc.
Groff Tractor & Equipment, Inc. makes no claim of suitability or fitness of performance for equipment rentals.
Rental Terms & Conditions
Table of Contents
Construction Equipment
Backhoe Loaders 3
Crawler Dozers 3
Wheel Loaders 3
Skid Steer Loaders 4
Compact Track Loaders 4
Articulated Trucks 4
Crawler Loaders 4
Mini Excavators 5
Standard Size Excavators 5
Hydraulic Breakers 5
Road Building Equipment
Milling Machines 6
Rollers 6
Miscellaneous Road Building Equipment 6
Maintainer/Grader 6
Trenching Equipment 7
Miscellaneous Equipment 7
Construction Equipment
Model Bucket Capacity Day Week Month
321F 1.50 yd3 $350 $1,050 $3,150 521F 2.00 yd3 $500 $1,500 $4,500 621F 2.75 yd3 $580 $1,740 $5,200 721F 3.50 yd3 $640 $1,900 $5,700 821F 4.50 yd3 $790 $2,370 $7,100 921F 4.75 yd3 $890 $2,670 $8,000 1021F 5.50 yd3 $1,080 $3,240 $9,700 1121F 6.25 yd3 $1,170 $3,500 $10,500 1221F 7.10 yd3 $1,390 $4,170 $12,500
Wheel Loader AttachmentsAttachment Day Week Month
Forks $132 $330 $900 Pipe Grabber Forks $216 $517 $1,400 Hydraulic Brooms $204 $495 $1,350
Wheel Loaders
3
Model Max Depth Day Week Month
580 Extendahoe 18' 3" $290 $870 $2,600580 w/ IT Front 18' 3" $330 $990 $2,950590 19' 7½" $370 $1,090 $3,250
Backhoe AttachmentsAttachment Day Week Month
Backhoe Forks (IT Style) $40 $120 $360Backhoe Brooms (96") $140 $420 $1,250Backhoe Side Dump Bucket $70 $200 $600
Backhoe Loaders
Additional Backhoe Buckets Size Day Week Month
12", 18" $30 $90 $25024" $40 $100 $30030", 36" $40 $120 $350
580 Extendahoe
Forks
Model Gross Horsepower Weight Description Day Week Month
650L 80 HP 16,091 lb 104" Str., 96" angled $480 $1,150 $3,450 750L 90 HP 17,284 lb 104" Str., 96" angled $540 $1,290 $3,850 850L 99 HP 17,519 lb 104" Str., 89" angled $630 $1,500 $4,500 850L winch 99 HP — Allied H4A winch $710 $1,700 $5,100 1150K 130 HP 25,300 lb 110" Str., 102" angled $800 $1,920 $5,750 1150K winch 130 HP — Allied H5C winch $900 $2,150 $6,450 1650M 165 HP — — NA $2,540 $7,600 2050M 232 HP — — NA $3,300 $9,900 2050M winch 232 HP — Allied H6H winch NA $3,640 $10,900
*Integrated Grade Control (IGC) – Pricing Available Upon Request
Crawler Dozers*1650M
921F
Forks
Construction Equipment
4
Model Horsepower Capacity Day Week Month
LR622 / CAT 953 110 HP — $960 $2,300 $6,900LR632 / CAT 963 150 HP — $1,120 $2,670 $8,000
Crawler Loaders
Capacity Day Week Month
30 Ton N/A $3,670 $11,00035 Ton N/A $4,340 $13,00040 Ton N/A $5,000 $15,000
Articulated Trucks
Net Operating Tipping Model Horsepower Load Load Day Week Month
SR160 49 HP 1,500 lb 3,000 lb $180 $540 $1,600 SR175 56 HP 1,750 lb 3,500 lb $190 $560 $1,680 SV185 56 HP 1,750 lb 3,500 lb $190 $560 $1,680 SR210 74 HP 2,000 lb 4,000 lb $200 $600 $1,800 SR220 82 HP 2,200 lb 4,400 lb $220 $640 $1,900 SR250 / SV250 84/76 HP 2,500 lb 5,000 lb $270 $800 $2,400 SV300 82 HP 3,000 lb 6,000 lb $290 $870 $2,600
Skid Steer AttachmentsAttachment Day Week Month
Auger (1 bit, 24" ext) $160 $468 $1,1506" Auger Bit $40 $110 $3159" Auger Bit $40 $110 $31512" Auger Bit $40 $120 $36018"Auger Bit $50 $140 $40524" Auger Bit $50 $150 $45036" Auger Bit $60 $180 $540Broom 72" Pickup; 84" Angle $130 $390 $1,170FAE UM125 Mulcher $570 $1,125 $2,700FAE UM150 Mulcher $615 $1,225 $2,925Planer 12" $480 $938 $2,250Planer 18" $585 $1,150 $2,750Planer 24" $630 $1,238 $2,950Pallet Forks $40 $110 $310Rockhound/Preparator $190 $550 $1,650Rockwheel $340 $1,000 $3,000Mower (brush) $170 $500 $1,500Grapple Bucket $180 $520 $1,550SS Loader Bucket $50 $140 $420Stump Grinder $250 $750 $1,250Trencher $180 $520 $1,550
Skid Steer LoadersSV300
Auger
Model Horsepower Operating Load Breakout Force Day Week Month
TL8 / TR270 68 HP 4,630 lb 6,728 lb $330 $990 $2,950TL10 / TR320 81 HP 5,952 lb 7,403 lb $390 $1,150 $3,450TR12 / TV380 97 HP 7,056 lb 8,692 lb $440 $1,320 $3,950Blade $110 $320 $950
Compact Track LoadersTL10
Construction Equipment
Hydraulic BreakersModel Power Day Week Month
PB210 500 ft-lb $200 $590 $1,750 PB310 750 ft-lb $220 $650 $1,950 PB420 1,000 ft-lb $280 $820 $2,450 MB500 1,500 ft-lb $430 $1,020 $3,060 MB750 2,000 ft-lb $560 $1,340 $4,000 MB1000 2,500 ft-lb $620 $1,470 $4,400 MB1200 3,000 ft-lb $690 $1,640 $4,900 MB1700 4,000 ft-lb $800 $1,920 $5,750 HB2100 / HB2500 5,000 ft-lb $1,010 $2,420 $7,250 HB3100 / HB3600 7,500 ft-lb $1,250 $3,000 $9,000 HB4200 / HB4700 10,000 ft-lb $1,530 $3,670 $11,000 HB5800 13,000 ft-lb $1,950 $4,670 $14,000
5
Model Weight Day Week Month
TB108 2,033 lb $130 $390 $1,150 CX27 5,500 lb $150 $450 $1,350 CX31 / Takeuchi TB228 7,000 lb $240 $700 $2,100 CX36 / Takeuchi TB138 or TB235 8,000 lb $250 $750 $2,250 CX50 or CX55 / Takeuchi TB260 10,500 lb $270 $800 $2,400 Takeuchi TB153R 12,430 lb $290 $850 $2,550
Mini ExcavatorsTB235
Model Weight Day Week Month
CX75C or 80C / Takeuchi TB285 or 180 18,000 lb $460 $1,090 $3,250 CX130C / CX145C SR 29,000 lb $650 $1,550 $4,650 CX160C 38,000 lb $690 $1,650 $4,950 CX160C Mechanical Thumb 38,000 lb $730 $1,750 $5,250 CX160C Hydraulic Thumb 38,000 lb $780 $1,870 $5,600 CX210C / CX235C SR 47,000 lb $830 $1,990 $5,950 CX250C 55,000 lb $940 $2,250 $6,750 CX300C 65,500 lb $1,040 $2,490 $7,450 CX300C Mechanical Thumb 65,500 lb $1,100 $2,620 $7,850 CX300C Hydraulic Thumb 65,500 lb $1,180 $2,820 $8,450 CX350C 78,500 lb $1,460 $3,500 $10,500 CX470C 108,000 lb $1,670 $4,000 $12,000
Plate CompactorsModel Weight Compactor Day Week Month
Mini-Exc 5,000 lb HC350 $120 $360 $1,050BH / Midi-Exc 8,000 lb HC450 $150 $450 $1,350CX160C 16,000 lb HC850 $220 $650 $1,950CX350C 20,000 lb — $310 $920 $2,750
Pulverizer (with excavator)Model Pulverizer Day Week Month
CX350C DP2800 $2,821 $6,500 $15,000
Standard Size Excavators
Additional Excavator Buckets Size Day Week Month
12" $60 $180 $540 18" $70 $200 $600 24", 30" $80 $230 $690 36", 42" $90 $250 $750 48", 54" $100 $280 $840 60" $100 $300 $900 72" $160 $400 $1,200
CX210C
MB1200
Road Building Equipment
6
Model Width Horsepower Weight Day Week Month
M413 10' board 110 HP 16,800 lb $500 $1,490 $4,450
Maintainer/Grader
Model Drum Day Week Month
W50/W60 18" / 24" NA $3,170 $9,500W120 4' cutter drum—Rear mount NA $6,670 $20,000 W150 4' cutter drum—Center mount NA $7,340 $22,000 W150 5' cutter drum NA $7,670 $23,000 W2000/W210 7' 2" cutter drum NA $9,000 $27,000
Milling MachinesW2000
Model Drum Centrifugal Force Day Week Month
Asphalt RollersHD8 32" 4,725 lb $170 $490 $1,450 HD10 39" 7,425 lb $180 $540 $1,600 HD12 48" 8,500 lb $230 $670 $2,000 HD13 51" 14,400 lb $280 $820 $2,450 HD14 54" 14,600 lb $330 $990 $2,950 HD70 59" 17,100 lb $440 $1,320 $3,950 HD110+ 66" 27,225 lb $500 $1,490 $4,450 HD120+ 78" 41,225 lb $550 $1,650 $4,950 HD140+ 84" 41,225 lb $700 $2,090 $6,250 HDO12 48" Oscillating & Vibratory $270 $800 $2,400 HDO70 59" Oscillating & Vibratory $520 $1,550 $4,650 HDO90+ 66" Oscillating & Vibratory $610 $1,820 $5,450 HDO120+ 78" Oscillating & Vibratory $670 $1,990 $5,950 HDO140+ 84" Oscillating & Vibratory $770 $2,290 $6,850
Dirt RollersRTX-SC2 Trench roller — $325 $650 $1,9503205 54" — $290 $850 $2,550 3307 66" — $530 $1,250 $3,750 3307P 66" — $570 $1,350 $4,050 3410 84" — $690 $1,650 $4,950 3410 cab 84" — $750 $1,800 $5,400 3410P 84" — $730 $1,750 $5,2503412 84" — $720 $1,720 $5,150 3412P 84" — $800 $1,900 $5,700 3412P blade 84" — $800 $1,900 $5,700 Pad Foot Shell Kit — — NA $200 $600
Rollers
Model Day Week Month
Super 700 Asphalt Path Paver NA $4,500 $9,000DT80CT Ride-On Self Propelled Broom $280 $840 $2,500BS50/BS60 Oil Injected Tamper $76.67 $230 $675 VP1340 Vibratory Plate $65 $130 $385 WP1550 Vibratory Plate $85 $170 $490
Miscellaneous Road Building Equipment
HD140+
3307P
Super 700 Asphalt Path Paver
Trenching Equipment
7
Equipment Day Week Month
Light EquipmentAtlas Copco XAS185 Air Compressor $80 $210 $630Wacker Light Tower $80 $200 $600Wacker E-3000 Ground Heater $1,340 $4,000 $12,000Wacker Indirect Air Fired Heater Arctic Bear XHD $1,120 $3,340 $10,000Wacker BTS635S Cut-Off Saw w/ Blade $70 $140 $430
Landscaping EquipmentDuratech Chipper TC-12 $270 $800 $2,400Reinco Mulcher TM35KUB (Skid Mount) $260 $650 $1,950Reinco Mulcher TM35XKUB (Trailer Mount) $300 $740 $2,200 Alamo Mower w/ TS6.110 or TS6.125 New Holland Tractor — $2,500 $6,000
AGL LasersGradelight 2700 Pipe Laser $130 $330 $990EAGL 310 Dual Slope Laser $200 $490 $1,450
Miscellaneous Equipment
Atlas Copco XAS185 Air Compressor
AGL Gradelight 2700 Pipe Laser
Material Dimensions Day Week Month
Trench Boxes Aluminum 8' x 8' $170 $500 $1,500 Aluminum 8' x 12' $180 $540 $1,600 Aluminum 8' x 20' $220 $640 $1,900 Steel 4' x 16' $150 $440 $1,300 Steel 4' x 20' $170 $500 $1,500 Steel 8' x 12' $140 $400 $1,200 Steel 8' x 16' $170 $500 $1,495 Steel 8' x 20' $200 $590 $1,750 Steel 8' x 24' $220 $640 $1,900
Manhole BoxesSteel 4' x 8' $130 $370 $1,100 Steel 8' x 8' $180 $540 $1,600 Steel 8' x 10' $190 $570 $1,700
Bedding BoxesSteel 7 yd3 $150 $440 $1,300 Steel 9 yd3 $160 $470 $1,400
Road PlateSteel 8' x 20' x 1" $130 $370 $1,095
Trenching Equipment
Additional GME Trench Box SpreadersSize Day Week Month
24", 30", 36" $30 $90 $25042" 48" $40 $110 $33060" $50 $150 $44072" $90 $250 $750
Aluminum
Steel
Alamo Mower
www.grofftractor.com
LOCATIONS
Your #1 Source for Everything Under ConstructionEquipment • Parts • Service • Rentals
PA
OH
MDVAWV
Mechanicsburg
Frederick
State College
New StantonNewcomerstown
Ebensburg
Cranberry Township
Ephrata
GT&E Rental Location
MarylandFrederick 5859 Urbana Pike Frederick, MD 21704 (301) 663-3185 (800) 822-0160
OhioNewcomerstown GT&E Rental and Service23044 Township Road 105Newcomerstown, OH 43832(740) 502-7685
PennsylvaniaMechanicsburg Corporate Headquarters6779 Carlisle Pike Mechanicsburg, PA 17050 (717) 766-7671 (800) 33-GROFF (47633)
Cranberry Township 100 Smith Dr Cranberry Township, PA 16066 (724) 898-1535 (877) 33-GROFF (47633)
Ebensburg 4355 Admirial Peary Hwy Ebensburg, PA 15931 (814) 472-7300 (877) 97-GROFF (47633)
State College Penn Eagle Industrial Park 210 Rolling Ridge Rd Bellefonte, PA 16823 (814) 353-8400 (888) 47-GROFF (47633)
Ephrata 20 Stauffer Ln Ephrata, PA 17522 (717) 738-0220 (888) 66-GROFF (47633)
New Stanton 963 South Center Ave P.O. Box 510 New Stanton, PA 15672 (724) 755-0124 (888) 82-GROFF (47633)
Equipment Air Compressors
Articulated Trucks
Asphalt and Soil Compactors
Asphalt Pavers
Asphalt Distributors
Compaction Testing
Compact Track Loaders
Crawler Tractors/Dozers
Crushers
Cut-off Saws
Demolition Equipment
Excavators
Forklifts
Generators
Hydraulic Breakers
Lasers
Light Towers
Loader Backhoes
Machine Control Systems
Milling Machines/Stabilizers
Motor Graders
Mowers
Pumps
Ride On Brooms
Rigid Trucks
Skid Steer Loaders
Trailers
Trench Shielding and Shoring
Wheel Loaders
Services• Continuing education in
industry technology
• CNH revolving account for parts, services, rental and accessory purchases
• Extended warranties
• Foam filled tires
• Hydraulic hose assemblies
• Laser and machine control system repair center
• Line boring and welding
• Machine inspection maintenance
• Oil and wear analysis
• Online parts catalog
• On-site field service
• Parts support with a multimillion dollar inventory
• Remanufactured engines, transmissions, hydraulics, parts and components
• Rental equipment
• Rental loss damage waiver coverage
• Tailored financing for new and used equipment purchases
• Training—Safety, operating and maintenance
• Undercarriage monitoring and replacement
• Used equipment
Recommended