GPSD-KM(M) GPS Dongle for Kenwood Nextedge Mobile …

GPSD-KM(M) GPS Dongle for Kenwood Nextedge Mobile Radio

User’s Manual

GPS Dongle Specification

Receiver type Channels 50

Frequency L1

Signals GPS C/A Code

Configuration Time pulse 0.25 Hz to 1 kHz

Navigation update rate up to 5Hz (ROM)

Time-To-First-Fix(1)

Cold Start (Autonomous) 28 s

Warm Start (Autonomous) 28 s

Hot Start (Autonomous) 1 s

Aided Starts(2) 1 s

Sensitivity(3)

Tracking & Navigation -160 dBm

Reacquisition -160 dBm

Cold Start (Autonomous) -147 dBm

Accuracy Horizontal position(4) < 2.5 m Autonomous

< 2.0 m SBAS

RMS 99% 30 ns <60 ns

Velocity(5) 0.1m/s

Heading(5) 0.5 degrees

Limits Acceleration 4 g

Altitude(6) 50000 m

Velocity(6) 500 m/s

Baudrate 9600 default Optional 4800

Note:

1. All satellites at -130 dBm

2. Dependent on aiding data connection speed and latency

3. Demonstrated with a good active antenna

4. CEP, 50%, 24 hours static, -130dBm, SEP: <3.5m

5. 50% @ 30 m/s

6. Assuming Airborne <4g platform

KENWOOD NX-700 GPS SETUP

STEP:

1. Connect programming cable with PC and your device then Run software KPG-111D.

2. Select COM Port

Remark: Maybe in difference computer will be show difference COM port .

3. Read Data from the transceiver

Press “Read” will start download data from transceiver to PC.

4. Select Edit � Optional features � Optional features 1

5. Check Common Page1 setting

6. Check Common Page2 setting

7. Common Page 3 setting

Setting COM Port2 for GPS and Baudrate 9600 (see GPS Baudrate).

8. Check Common Page 4 setting

Setting finished press “close” icon

9600

9. Optional �Optional Feature 2

10. Select GPS

Setting finished press “close” icon.

11. Key Assignment

12. Select Menu

13. Select “Utility” and add “GPS position Display” Item to function list

The “GPS Position Display” item will show in function list.

Setting finished press “closed”.

14. Write Data to the Transceiver

Press “Write” will upload to your transceiver.

KENWOOD NX-700 GPS FUNCTION READING

1. Power on the RADIO

2. PRESS Key Select GROUNP.

3. Press or KEY Select MENU to UTILITY

4. Press key.

5. Press key.

The screen will be show GPS data .

Eascape MENU Press Key.