View
81
Download
0
Category
Preview:
Citation preview
© Global Maritime – Deep Sea Mooring 2015
The New Global Maritime Group
2
550+ Employees, consisting of Naval Architects, Marine Engineers, Master Mariners, Civil and Structural Engineers, Risk Analysts, etc.
© Global Maritime – Deep Sea Mooring 2015
Deep Sea Mooring – General Services
4
Global specialist providing Turnkey Mooring Rig
Move services (Jack up & MODU)personnel &
procedures
Mooring Analysis (Moored and DP units)
Prelaid Mooring Equipment rental packages
Marine Engineering
Mooring Equipment Inspection
Modern Equipment fleet Certified to highest
Classification standards
© Global Maritime – Deep Sea Mooring 2015
Our Business
5
Delivers Optimum quality Mooring and Engineering solutions to E&P
companies and Drilling Operators
Established in 2008
Pre-lay and Rig move planning to operations in Australia, Norway,
Canada, Mediterranean, West Africa, North Africa and South East Asia
Blue Chip Client base
All Mooring components manufactured to DNV regulatory specifications
Committed to a vendor network of highly regarded manufacturers
State of the art Karratha base facilities and logistics systems
ISO 9001 certified and compliant to ISO 14001 AND OHSAS 18001
© Global Maritime – Deep Sea Mooring 2015
ANCHORS BUOYSHigh Holding Power Stevshark Mk5 anchors for mooring mobile offshore units. The anchors are certified according to DNV and are also incorporated with DIGIN software for geotechnical analysis.
Wide range of surface and deep water rated subsurface modular buoyancy units. The buoys can be combined to meet the exact requirement for buoyancy.
CHAINS FIBRE ROPESGrade R4 and R5 mooring chains sourced exclusively from renowned manufacturers, such as Ramnäs Bruk (Sweden), Hamanaka Chain (Japan) and Vicinay Cadenas (Spain). All our chains are certified according to DNV-OS-E302.
Up to 858 tonnes minimum breaking strength fibre rope inserts of varying lengths. Our fibre ropes are certified by DNV according to DNV-OS-E303.
SWIVELS WIRESWide range of slide and roller bearing swivels for mooring lines and anchor handling purposes, with up to 858 tonnes minimum breaking strength. The swivels are designed to operate at water depths down to 2000m.
Mooring line wire inserts, pennant wires and PCPs (permanent chaser pendants). Our wires come from renowned suppliers and are terminated with sockets to match the highest standards for handling and mooring purposes.
MOORING CONNECTORS RECOVERY EQUIPMENTA wide range of connectors – e.g. kenter links, trident anchor shackles and adapters. The connectors are certified in accordance with DNV-OS-E302 to match the quality of our mooring chains.
All necessary hooks to carry out complex pre-lay and rig move operations, such as J-lock and J-hooks, ROV hooks, grapnel hooks and our hydro acoustic subsea release hook.
P:6
Mooring Equipment Categories
© Global Maritime – Deep Sea Mooring 2015
Exclusive Deep Sea Mooring TechnologiesSimple Innovations – Big Benefits
7
© Global Maritime – Deep Sea Mooring 2015
RFID Equipment Marking
8
HIGHLY DURABLE RFID bands («Sledge hammer
tested») fitted to all DSM components
TRACEABILITY and easy identification (a focus area in
the industry)
Risks of misreading id numbers is eliminated to ensure
100% COMPLIANCE to PSA regulations
TIME SAVED during anchor handling operations.
IMPROVED invoice timing and accuracy
GLOBAL IMPLEMENTATION BY Q1 2015
© Global Maritime – Deep Sea Mooring 2015
Advanced Distance and Positioning System (ADAPS)
9
Accurate landing position of Anchors eliminating ROV
requirement
Verify penetration of Anchors and compliance with DIGIN
Analyses
Obvious cost savings
Vessel time and ROV costs during Pre-lay and Rig move
operations
Satisfy Warranty & Insurance partners
© Global Maritime – Deep Sea Mooring 2015
Engineering Services
12
HYDRODYNAMIC ANALYSIS
MOORING ANALYSIS
RISER ANALYSIS
VESSEL MOTION ANALYSIS
VISUALIZATION, STORYBOARDS
OFFSHORE ENGINEERING SUPPORT
© Global Maritime – Deep Sea Mooring 2015
Engineering Software
13
OrcaflexTime Domain analysis
SIMOMotion and station keeping
analysis
SIMAGUI for SIMO
AutoCadDrawing, Storyboards
MultisurfDesign of 3D objects, vessel
modelling for WAMIT
WAMITDiffraction/radioation analysis
MIMOSAFrequency domain analysis
GMoorFrequency domain analysis
© Global Maritime – Deep Sea Mooring 2015
Drift – And Drive – Off Simulations
Explore collision scenarios
Estimate of energies
Typical applications
Risk analysis
Input to structural analysis
16
© Global Maritime – Deep Sea Mooring 2015
Prelay Mooring Systems and Rig Move
20
Rig ManagerHighly durable RFID bands («Sledge hammer tested») fitted to all DSM components.
Traceability and easy identification (a focus area in the industry).
RFID bands synce with online rig manager for generation of line drawings with correct ID
© Global Maritime – Deep Sea Mooring 2015
Strategic Alliance – Neptune Geomatics
22
Rig Positioning
3D ‘as laid’ Catenary Modelling
Infrastucture clearance visualisation
Mooring component ‘Reaction Simulation’
© Global Maritime – Deep Sea Mooring 2015
Deep Sea Mooring Inspection
25
Inspection division of Deep Sea Mooring
Serving Internal and External requirements for a
higher Inspection Standards based on DNV, ABS and
Lloyds Guidelines.
Mobile Chain Inspection units
Extensive Technical Experience
Chain Manufacturing know how
Phased Array Inspection
Independent Auditors
Recommended