View
36
Download
0
Category
Tags:
Preview:
Citation preview
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-1 of 5.0-24
Activity : Period-end Closing Transactions Step 1: AR Foreign Currency Revaluation Step 2: AP Foreign Currency Revaluation Step 3: GL Open Item Foreign Currency Revaluation Step 4: GL Non-Open Item Foreign Currency Revaluation Step 5: GR/IR Automatic Clearing Step 6: Print FI Reports Step 7: Open/Close Period
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-2 of 5.0-24
Activity: Period-end Closing Transactions Description: This document describes the processes required for period-end closing. Pre-requisite: Impact: _____________________________________________________________________________
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-3 of 5.0-24
Step 2: AR Foreign Currency Revaluation Description: We have to execute this transaction for the following currency type due
to the implementation of multiple currencies: 10 Company code currency, i.e. EGP; 30 Group currency, i.e. USD; 60 Global Company currency, i.e. GBP.
Menu path : Accounting Financial Accounting Accounts Receivable Periodic Processing Closing Valuate Foreign Currency Valuation Transaction code : F.05
Foreign Currency Valuation Execute the revaluation on test mode. 1. Click on the tab 2. Enter pertinent data:
Company code: EG01 BAT-Egypt
Evaluation key date: 19.05.2005
Valuation method: AME AME Valuation method
Valuation in curr type: Choose one of the following: o 10 - Company code
currency; o 30 Group Currency
USD; o 60 Global Company
currency GBP
3. Create postings: Leave BLANK for test run
4. Batch input session name:
EG01-FCARNN where NN is number range from 01 to 03 for each currency type revaluation.
5. Document date: 18.05.2005 (last
day of the fiscal period) 6. Posting date: same as the
document date 7. Reversal posting date:
19.05.2005 (first day of the following fiscal period)
8. Reverse posting: Ticked to
create reversal at reversal posting date.
9. Click on the tab
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-4 of 5.0-24
Foreign Currency Valuation Execute the revaluation on test mode. 10. Valuate customer open items:
Select the flag
11. Click to execute in Test mode
Foreign Currency Valuation Execute the revaluation in Test mode. 12. The Foreign Currency
Valuation report lists all the items revaluated. Check if the amount calculated from the customer accounts is correct.
13. Click on Postings button to view
the simulated accounting posting proposal list.
Note: Press on the Message button to view if there is any error message.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-5 of 5.0-24
Foreign Currency Valuation Execute the revaluation on test mode. In the Posting Proposal List: 14. View and check that accounting
entries are correct!
15. Click on twice to return to selection screen.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-6 of 5.0-24
Foreign Currency Valuation Execute revaluation on production run All selection made earlier should remain unchanged except, 16. Creating postings: Ticked to
generated batch session in production run.
17. Click to execute run. 18. The Foreign Currency
Valuation and Postings in batch input session reports will be shown, you can download the report. Take note that the documents have been posted yet, therefore in the later report, the document number field remained blank.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-7 of 5.0-24
Batch Input: Session Overview Go to transaction SM35: Menu path: System >> Services >> Batch Input >> Session 19. Click on the selection box of
batch input name as in the selection screen: EG01-FCARNN.
20. Click on icon. 21. Select Display erros only.
(System will processed in background except theres error)
22. Click on icon to proceed
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-8 of 5.0-24
Batch Input: Session Overview 23. Select Display erros only.
(System will processed in background except theres error)
24. Click on icon to proceed
Batch Input: Session Overview 25. Select Display erros only.
(System will processed in background except theres error)
26. When information prompted, go
back to SM35 by click on button. Check that the status now has changed to Processed.
27. To check batch session activities,
select the session and click on Log icon
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-9 of 5.0-24
Batch Input: Session Overview 28. To check batch session activities,
select the session and click on Log icon
Batch Input: Log Overview 29. Double click on batch session log
line items displayed.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-10 of 5.0-24
Batch Input Log for Session EG01_FCARNN 30. Record the document number(s). 31. Go to transaction FB03 to display
the document.
On T-Code prompts: Type /nFB03
Display Document: Initial Screen Information: One document generated for each reconciliation account and currency combination. E.g. Customer 120000/USD Customer 120000/THB Customer 135307/USD Customer 135307/THB
Display FI document 32. Document number: (document
number in the batch log) 33. Company code: EG01 34. Fiscal year: Current fiscal year 35. Press to view document
overview
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-11 of 5.0-24
Document Overview 36. Check and verify accounting
posting entries
Note: The Gain/Loss accounts and
its defaulted cost centre Revaluation B/S account The actual and reverse
posting date on documents
37. Click twice to return to application main menu
You have completed this process.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-12 of 5.0-24
Step 3: AP Foreign Currency Revaluation Description: We have to execute this transaction for the following currency type due
to the implementation of multiple currency: 10 Company code currency, i.e. EGP; 30 Group currency, i.e. USD; 60 Hard currency, i.e. GBP.
Menu path : Accounting Financial Accounting Accounts Payable Periodic Processing Closing Valuate Foreign Currency Valuation Transaction code : F.05
Follow Step 2 procedure except that this time on the tab screen: Tick on flag instead of .
Process the selection as
described in the procedures in Step-2
Use batch name EG01-
FCAPNN where NN is number range from 01 to 03 for each currency type revaluation.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-13 of 5.0-24
Step 4: GL Open Item Foreign Currency Revaluation Description: This transaction will revaluate the foreign balances for GL defined as
Open item management in its GL master record. There is a pre-defined set of GL accounts to revaluate.
We have to execute this transaction for the following currency type due to the implementation of multiple currency: 10 Company code currency, i.e. EGP; 30 Group currency, i.e. USD; 60 Hard currency, i.e. GBP.
Pre-requisite: In the GL master record:
Open item management is ticked Menu path : Accounting Financial Accounting General Ledger Periodic Processing Closing Valuate Foreign Currency Valuation Transaction code : F.05
Foreign Currency Valuation Follow Step 2 procedure except for some of the following changes: 1. Use batch name EG01-
GLOINN where NN is number range from 01 to 03 for each currency type revaluation.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-14 of 5.0-24
2. Select the
tab, tick on the flag
Note Ensure that the Valuate GL account balances flag in the tab is not ticked.
3. G/L account: There is a
list of GL accounts specifically for each valuation depending on your selection. Get the list entitled GL accounts for GL Open Item Revaluation from the instructor and enter the GL numbers by clicking on the icon.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-15 of 5.0-24
Foreign Currency Valuation The Foreign Currency Valuation listing will show: the document exchange rate
and the period end exchange rate;
the valuated amount will be shown on the rightmost of the report;
the document number shown is the to-be-generated document number as the transaction is not updated yet. This is only a posting proposal.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-16 of 5.0-24
Step 5: GL Non-Open Item Foreign Currency Revaluation Description: This transaction will revaluate the foreign balances for GL not defined as
Open item management in its GL master record. There is a pre-defined set of GL accounts to revaluate.
We have to execute this transaction for the following currency type due to the implementation of multiple currency: 10 Company code currency, i.e. EGP; 30 Group currency, i.e. USD; 60 Hard currency, i.e. GBP.
Pre-requisite: In the GL master record:
Open item management not ticked Exchange rate difference key = BANK
Menu path : Accounting Financial Accounting General Ledger Periodic Processing Closing Valuate Foreign Currency Valuation Transaction code : F.05
Foreign Currency Valuation Follow Step 2 procedure except for the following: 1. Use batch name EG01-
GLFBNN where NN is number range from 01 to 03 for each currency type revaluation.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-17 of 5.0-24
2. Select tab,
tick on the flag
Note Ensure that the Valuate GL account open items flag in the tab is NOT ticked.
3. G/L account: There is a
list of GL accounts specifically for each valuation depending on your selection. Get the list entitled GL accounts for GL account foreign balances revaluation from the instructor and enter the GL numbers by clicking on the icon.
4. Exchange Rate difference
key: Enter BANK.
Foreign Currency Valuation The Foreign Currency Valuation listing will show: the document exchange rate
and the period end exchange rate;
the valuated amount will be shown on the rightmost of the report;
the document number shown is the to-be-generated document number as the transaction is not updated yet. This is only a posting proposal.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-18 of 5.0-24
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-19 of 5.0-24
Step 6: GR/IR Automatic Clearing Description: This transaction is used to clear the open items that are matched based
on the criteria set in the configuration. GLs set as open item Menu path : Accounting Financial Accounting General Ledger Periodic Processing Automatic Clearing Without Specification of Clearing Currency Transaction code : F.13
Automatic Clearing without Definition of Clearing Currency (SAPF124) Execute the GR/IR clearing on test mode and check the results. 1. General selection data:
Company code: EG01 BAT-EG
Fiscal year: Current fiscal year
Posting date TO: Last day of the fiscal year
2. Tick on the Select GL
accounts flag 3. GL account : 200200 (GRIR) 4. Click on the Test run flag 5. Click on the Detail list with error
log flag (Default) 6. Click on the Only docs which can
be cleared flag
7. Click on to execute in Test Run Mode
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-20 of 5.0-24
Automatic Clearing without Definition of Clearing Currency (SAPF124) Execute the GR/IR clearing on test mode and check the results. Check and understand the Test Run list, as appeared on the report header. Identify the open items that are can be cleared against each other in the list.
8. Click on the icon to return to the selection screen.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-21 of 5.0-24
Automatic Clearing without Definition of Clearing Currency (SAPF124) Execute the GR/IR clearing on production run. 9. Repeat the procedure above
except that this time UNTICK the Test run flag.
10. Click on to execute in Production Run Mode
11. System prompts message: W:
This program run in production run.
12. Press to confirm and
proceed.
Automatic Clearing without Definition of Clearing Currency (SAPF124) Execute the GR/IR clearing on production run. 13. Note that the report header
indicates Update Run at its header.
14. Click twice to exit the transaction.
You have completed this transaction.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-22 of 5.0-24
Step 7: Print FI Reports Report : Financial Statement Menu path : Accounting Financial Accounting General Ledger Information System General Ledger Reports Balance Sheet/ Profit and Loss Statement/ Cash Flow General Actual/Actual Comparisons Balance Sheet / Profit and Loss Statement Transaction code : S_ALR_87012284 SAP Easy Access:
1. Chart of accounts: AME 2. Company code: EG01 3. Currency Type: Choose one of
the following: 10 company code
currency, i.e. EGP; 60 Hard currency, i.e.
GBP; 30 Group currency, i.e.
USD 4. Financial Stmt Version: MU01 5. Reporting Year: Current fiscal
year 6. Period: current fiscal period 7. Plan Version: 00
8. Click to execute the report
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-23 of 5.0-24
Step 8: Open/Close Posting Period Menu path : Key in ZOB52 at the Command field and press Transaction code : ZOB52
Change View Posting Periods: Specify Time Intervals: Overview
1. Posting variant: MU01
2. Click on the icon.
3. There are 2 date ranges for each
of the account type, as follows:
+ = All types; A = AA / Asset type; D = AR / Customer type; K = AP / Vendor type; M = Material type. The period range specified will be the period that allows posting.
4. Click to exit this screen.
You have completed this transaction.
Project OneSAP Training Material
Topic : GL Period End Closing
5.0_AME_EG_TRN_GL_PERIOD_END_CLOSING.DOC Page 5.0-24 of 5.0-24
Recommended