View
214
Download
0
Category
Preview:
Citation preview
For reliable, high quality process communications
MTL1000 Series Signal Conditioners
Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, info@malux.fi, www.malux.fi
The new MTL1000 Series of signal conditioning isolatorscomplement our Intrinsic Safety products to provide a complete interface solution
EATON’S CROUSE-HINDS BUSINESS MTL1000 Series Signal Conditioners2
Reduced installation costsIncreased reliabilitySingle source supply
New
Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, info@malux.fi, www.malux.fi
EATON’S CROUSE-HINDS BUSINESS MTL1000 Series Signal Conditioners 3
With process plants now spread over wide areas and the demand for more information, the transfer of electrical signals present many challenges. High power devices mixed in with low level signal transfer generates an environment which has an adverse effect on the ability to control and measure the processes.
Signal conditioning makes a major contribution to resolving issues such as varying grounding potentials, reducing signal noise and eliminating earth loops. It also protects sensitive control equipment from dangerous voltages. All these benefits add up to reduced down time, fewer failures, greater product yield and significant cost savings.
Signal conversion to a common type allows the use of standard interface and control cards.
Many different signals from sensors such as thermocouples, RTDs, position monitors, pressure and flow monitors all need to be handled. Converting them to the same signal type allows the control system card choice to be simplified and fewer installed. Higher level signals are also less susceptible to noise and interference so by limiting the distances the low level signals travel reduces these effects.
MTL is already well known for its hazardous area intrinsic safety and process IO portfolio, but signal conditioning is used in many additional industrial processes.
We have applied our expertise to the MTL1000 Series of signal conditioning isolators, making MTL your first choice as a trusted, single source of supply for all of your interface requirements.
Introduction to Signal Conditioning
Protecting field instruments and control systems for safe, reliable process communications
www.mtl-inst.com mtlenquiry@eaton.com
Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, info@malux.fi, www.malux.fi
reduces power wiring by up to 90%, is quicker to install resulting in reduced costs
Embedded Power-Busp
can be added so power can be maintained in case one power supply fails
Redundant Power Feed
with optional MTL1991 power bus feed andalarm module
Added Power Security
are pre-fitted to the DIN rail, enabling ease of future expansion
Power Connectors
with slim-line 6.2mm wide modules designed to save space and enclosure costs
High Packing Densityand alarm relay alerts the control room so a failure can be quickly rectified
Status Indication
is improved enhancing plant performance and reducing risk of downtime
Signal Qualityare supported, delivering valuable data from HART® field devices
HART® communications
Key Features
EATON’S CROUSE-HINDS BUSINESS MTL1000 Series Signal Conditioners4
The New MTL1000 Seriesof modules and accessories
The MTL1000 Series is easy to install, its slim-line design enables high packing density; its power-bus feature significantly reduces installation costs; and you can now source all your interface requirements from a single trusted provider.
is designed for use with process connected systems
Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, info@malux.fi, www.malux.fi
EATON’S CROUSE-HINDS BUSINESS MTL1000 Series Signal Conditioners 5
The MTL1991 offers an alternative to feeding power directly onto the power-bus. For added power security the MTL1991 module option features an alarm output for instant notification of power failure. The addition of another MTL1991 module delivers redundant power feeds, thus increasing system availability.
MTL1000 power optionsMTL1991 Power feed and alarm module
PSU1 PSU2
Alarms
The MTL1000 incorporates the use of an embedded power bus in the DIN-rail. This provides power directly to the modules, reducing the amount of wiring upon installation. The power bus connectors simply plug together and can be expanded to accommodate the required number of isolators. Spare positions can be easily installed for future expansion.
Embedded Power-bus
Application Catalogue Number Description Width
MTL1141 4-20mA Tx repeater PSU 6.2mm
MTL1142 4-20mA Tx repeater PSU HART 6.2mm
MTL1143 1 in 2 out Tx repeater 6.2mm
MTL1145 * 4-20mA current repeater 6.2mm
MTL1171 THC converter - 4-20mA/1-5V (type J or K) 6.2mm
MTL1172 RTD converter - 4-20mA/1-5V (PT100) 6.2mm
MTL1173 Potentiometer - 4-20mA/1-5V 100Ω to 110kΩ 6.2mm
Switch / Prox inputs MTL1211 * 1ch Switch isolator, Namur/contact I/P, 2 outputs Rep/LFD 6.2mm
V/I I/V MTL1249 * Input 0-1V, 0-5V, 0-10V, 1-5V, 0-20mA, 4-20mA Output 0-5V, 0-10V, 1-5V, 0-20mA, 4-20mA
6.2mm
MTL1271 * THC converter (type J or K) - loop powered 6.2mm
MTL1272 * RTD converter (PT100) - loop powered 6.2mm
Trip amplifiers MTL1321 * 0-10V/0-20mA trip amp, c/o contact out 6.2mm
MTL1341 * 4-20mA trip amp - 2SP with current repeat 17mm
MTL1371 * THC trip amp - 2SP with current repeat 17mm
MTL1372 * RTD trip amp - 2SP with current repeat 17mm
MTL1373 * Potentiometer - 2SP with current repeat 17mm
Power MTL1991 Power feed module and alarm module 6.2mm
Selection Guide
* For future release
Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, info@malux.fi, www.malux.fi
EATON’S CROUSE-HINDS BUSINESS MTL1000 Series Signal Conditioners6
IndustriesTraditional MTL customers in
Petrochem, chemical and process use
signal conditioning in many areas of their
plant, in addition to intrinsic safety. Safe
area applications such as the utilities
require signal isolation and conditioning
to ensure safe, smooth and reliable
process communications.
Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, info@malux.fi, www.malux.fi
EATON’S CROUSE-HINDS BUSINESS MTL1000 Series Signal Conditioners 7
Applications
A
CONTROL SYSTEM
Signal ConversionMany types of signals in the control of a plant exist. Conversion to a common type reduces the number of system card types and quantity that are required. Converting low level signals also improves signal quality and gives better control.
A
V
CONTROL SYSTEM
Elimination of Grounding Fault CurrentsWhere high power devices are installed significant ground potential differences can occur across the plant, especially under fault conditions. Without isolation these fault currents and voltages can severely damage system control equipment. Signal isolation eliminates damage under these conditions thus keeping the process and plant operational.
A
CONTROL SYSTEM
Noise ReductionMachinery is a major source of noise and interference. Signal isolation and conditioning reduces the effects of this interference on the process signals. This in turn will improve product yield and reduce operating costs.
A
CONTROL SYSTEM
LOCAL PANEL
Signal RepeatThere are many instances where signals need to be transmitted to more than one area of the plant or measuring elements. Signal duplication with isolation provides the means to achieve this whilst maintaining isolation between the plant equipment.
Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, info@malux.fi, www.malux.fi
AUSTRALIAMTL Instruments Pty Ltd, 205-209 Woodpark Road, Smithfield, New South Wales 2164, Australia
Tel: + 61 1300 308 374 Fax: + 61 1300 308 463E-mail: mtlsalesanz@eaton.com
BeNeLuxMTL Instruments BVTerheijdenseweg 465, 4825 BK BredaThe Netherlands
Tel: +31 (0) 76 7505360 Fax: +31 (0) 76 7505370E-mail: mtl.benelux@eaton.com
CHINACooper Electric (Shanghai) Co. Ltd. Room 2001, China Life Tower, 16 Chao Yang Men Wai Street,Chao Yang District, Beijing, China 100020
Tel: + 86 10 5980 0231 Fax: + 86 10 8562 5725E-mail: mtl-cn@eaton.com
FRANCEMTL Instruments sarl,7 rue des Rosiéristes, 69410 Champagne au Mont d’OrFrance
Tel: + 33 (0)4 37 46 16 70 Fax: +33 (0)4 37 46 17 20E-mail: mtlfrance@eaton.com
GERMANYMTL Instruments GmbH, Heinrich-Hertz-Str. 12, 50170 Kerpen, Germany
Tel: + 49 (0)22 73 98 12 - 0 Fax: + 49 (0)22 73 98 12 - 2 00E-mail: mtlgmbh@eaton.com
INDIAMTL India, No.36, Nehru Street, Off Old Mahabalipuram RoadSholinganallur, Chennai - 600 119, India
Tel: + 91 (0) 44 24501660 /24501857 Fax: + 91 (0) 44 24501463E-mail: mtlindiasales@eaton.com
ITALYMTL Italia srl, Via A. Meucci, 10, I-20094 Corsico (MI), Italy
Tel: + 39 (0)2 61802011 Fax: + 39 (0)2 61294560E-mail: chmninfo@eaton.com
JAPANCooper Crouse-Hinds Japan KK, MT Building 3F, 2-7-5 Shiba Daimon, Minato-ku,Tokyo, Japan 105-0012
Tel: + 81 (0)3 6430 3128 Fax: + 81 (0)3 6430 3129E-mail: mtl-jp@eaton.com
NORWAYNorex ASFekjan 7c, Postboks 147, N-1378 Nesbru, Norway
Tel: +47 66 77 43 80 Fax: +47 66 84 55 33E-mail: info@norex.no
SINGAPORECooper Crouse-Hinds Pte LtdNo 2 Serangoon North Avenue 5, #06-01 Fu Yu BuildingSingapore 554911
Tel: + 65 6 645 9888 Fax: + 65 6 487 7997E-mail: sales.mtlsing@eaton.com
SOUTH KOREACooper Crouse-Hinds Korea12F, Vision Tower, 707-2 Yeoksam-Dong Gangnam-Gu,Seoul 135-080, South Korea.
Tel: +82 2 538 3481 Fax: +82 2 538 3505E-mail: mtl-korea@eaton.com
UNITED ARAB EMIRATESCooper Industries/Eaton Corporation Office 205/206, 2nd Floor SJ Towers, off. Old Airport Road, Abu Dhabi, United Arab Emirates
Tel: +971 2 44 66 840 Fax: +971 2 44 66 841E-mail: mtlgulf@eaton.com
UNITED KINGDOMMeasurement Technology Limited, Great Marlings, Butterfield, LutonBeds LU2 8DL
Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283E-mail: mtlenquiry@eaton.com
AMERICASCooper Crouse-Hinds MTL Inc. 3413 N. Sam Houston Parkway W.Suite 210, Houston TX 77086, USA
Tel: + 1 281-571-8065 Fax: + 1 281-571-8069E-mail: mtl-us-info@eaton.com
© 2014 MTLAll Rights ReservedZL-B-SIGCON-EN-1014October 2014
Measurement Technology Limited Great Marlings, Butterfield, LutonBeds LU2 8DL, UK.Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283E-mail: mtlenquiry@eaton.comwww.mtl-inst.com
Eaton is a registered trademark.
All other trademarks are propertyof their respective owners.
Eaton’s Crouse-Hinds
The safety you rely on.See the complete product offering at www.mtl-inst.com
For more information:If further assistance isrequired, please contactan authorised MTLDistributor, Sales Office,or Customer ServiceDepartment
U.S. (Global Headquarters):Eaton’s Crouse-Hinds Business1201 Wolf StreetSyracuse, NY 13208 (866) 764-5454FAX: (315) 477-5179FAX Orders Only:(866) 653-0640
CrouseCustomerCTR@Eaton.com
Measurement Technology Limited Great Marlings, Butterfield, LutonBeds LU2 8DL, UK.Tel: + 44 (0)1582 723633 Fax: + 44 (0)1582 422283E-mail: mtlenquiry@eaton.com
www.mtl-inst.com
Sales: Malux Finland Oy, P.O.Box 69, FI-06151 Porvoo, Phone +358 19 574 5700, Fax +358 19 574 5750, info@malux.fi, www.malux.fi
Recommended