View
3
Download
0
Category
Preview:
Citation preview
Advanced Technology, Inc. • Made in USA • Lifetime Warranty • No Gunsmithingwww.ATIgunstocks.com • 102 Fieldview Dr. • Versailles, KY 40383 • PH: 859-873-9877 • FAX: 859-873-6229 IS-ARA2400-021808
MAKE SURE YOUR RIFLE CHAMBER IS EMPTY AND MAGAZINE HAS BEEN REMOVED FROM THE ACTION.
1. Seeexplodedviewonoppositesideforpartdescription,screwsize,anditem
number.
2. InstallCollapsibleButtstockwithCheekrest:
a. Pulldown onlatch lever(#7), fullstroke, andpush collapsible buttstock (#2)onto buffertube. Picture #1 b. Releaselatch leverto positionas required.c. Buttstock position canbe changed bypulling uponlatch
lever(#7)andslidingcollapsiblebuttstocktonewposition.
Picture #2
ToAdjustCheekRest 1. Loosenfour #6-32x3/8 screws(#14), slidecheekrest (#13)upto correct
position,retighten fourscrews(#14).
Picture #3 2. Totaladjustmentis3/8inch with1/8inchincrements.
3. InstallPistolGrip: 1. Removeoriginalpistolgripbyremoving screwfrombottomofgrip. CAUTION:Detentspringmayfallout
duringremovalprocess. 2. Removespringfromoriginalgripand
placeintoholeontopofnewgrip(#1). 3. Installnewgripusingoriginalscrew.
AR-15 STRIKEFORCECOLLAPSIBLE STOCK AND GRIP
INSTALLATION INSTRUCTIONSPART# ARA2400
Fits: All AR-15 and Variants
Congratulations on purchasing one of Advanced Technology, Inc.’s STRIKEFORCE components. There are several combinations and additional components available. Check with your local retailer for more new, exciting accessories.
INSTALLATION OF COLLAPSIBLE BUTTSTOCK WITH CHEEK REST
Picture #1
Picture #2
Picture #3
IMPORTANT: Check safety lever switch to confirm spring has been installed correctly.
INSTALLATION OF PISTOL GRIP
CHEEK REST ADJUSTMENT
AR-15 STRIKEFORCECOLLAPSIBLE STOCK AND GRIP
INSTALLATION INSTRUCTIONSPART# ARA2400
Fits: All AR-15 and Variants
Recommended