View
246
Download
5
Category
Preview:
DESCRIPTION
catalogo de filtros de aire MANN
Citation preview
MANN+HUMMEL ENTARONThe new two-stage filter flexible anddesigned for compact installation spaces
Entaron en:Entaron en 30.06.2011 11:38 Uhr Seite 1
The housing of the new ENTARON is made from fibre-glassreinforced plastic. This means the filter is able to handleextreme physical conditions. At the same time the designhas the advantage that it is resistant to corrosion.
The housing consists of three parts with the casing attachedto the ports using a special welding process. This weldingensures robust and reliable joining and at the same timeenables practically every required orientation of the port tothe integrated bracket. The result is high flexibility and easyadaptation of the filter to almost all installation situations.
2
Housing made from fibre-glass reinforced plastic
Raw air inlet
Service cover withlocking device
ENTARON: developed for the highest requirements
Dust discharge valve
MANN+HUMMEL has developed a new two-stage filter forapplications with heavy dust loads: the ENTARON. Thecompact design of the new filter combines high performancewith a small installation space and so takes into account therequirements of next generation machines and vehicles. TheENTARON 10 is the first product of a new series designedfor flow rates from 2 to 10 m/min. Further sizes are currentlyunder development.
Advantages at a glance:
excellent flexibility through variable modular system corrosion-free and robust housing through use offibre-glass reinforced plastic
easy handling with tool-free element replacement excellent reliability through robust elements andpatented sealing system
eco-friendly disposal through metal-free filter element(fully incinerable)
easy adaptation to different machines throughdifferent port positions
quick first installation on vehicle through screwthreads integrated in housing
Robust housing
A high separation efficiency of over 88% makes the newENTARON ideal for applications with heavy dust loads. Thishigh value also enables a more compact filter design withoutshortening service life. In its class, the new ENTARON re-presents the current benchmark for small installation spacesand service life.
Naturally the standard version is equipped with an integratedconnection point for a service switch or indicator.
Connection forservice switchor indicator
Integrated mounting pointsM8 or 9 mm (0.35)
Entaron en:Entaron en 30.06.2011 11:39 Uhr Seite 2
3ENTARONDimensions and part numbers
Part no.without
secondary element
40 450 92 951
40 450 92 950
40 450 92 952
withsecondary element
40 450 92 941
40 450 92 940
40 450 92 942
MANN-FILTERmain element
C 19 450
MANN-FILTERsecondary element
CF 450
MANN-FILTER replacement elementFig.
1
2
3
Size
ENTARON 10
Nominalflow rate[m/min]
7.5 - 10
ENTARON 10
Size Dimensions in mm [Dimensions in inches]
d1
102(4.02)
d2
256(10.08)
h1
383(15.08)
h2
210(8.27)
h3
27,6(1.09)
h4
130(5.12)
h5
145(5.71)
h6
88(3.46)
b1
52(2.05)
b2
100(3.94)
b3
250(9.84)
b4
280(11.02)
b5
124(4.88)
b6
91(3.58)
t1
63(2.48)
Fig. 1 Fig. 2 Fig. 3
Port size corresponds to
114.3 mm (4.5)
b5
d 2
b 6
h 5h 4
h 6
h1 h3
t1
b1b2
h2
b3
b4
d 1
Entaron en:Entaron en 30.06.2011 11:39 Uhr Seite 3
4ENTARONFlow characteristics and specifications
... for flow rates as per ISO 5011ENTARON 10
Flowrateresistance
[mbar]
Volume flow V [m3/min]0 2 4 6 8 10 12
50
40
30
20
10
0
with secondary elementwithout secondary element
... for dust capacity as per ISO 5011ENTARON 10
Flowrateresistance
[mbar]
Dust capacity [g]0 1000 2000 3000 4000 5000 6000 7000 8000
80
70
60
50
40
30
20
10
0
with secondary elementwithout secondary element
Volume flow: 10 m3/min
Further specifications
Operating temperature -30 C to +90 Cwith continuous duty
+110 C for a short time
Tightening torque for 25 Nmmounting screws
Tightening torque for hose max. 6 Nmclamp (on the clean air side)
Housing material PP GF 30
Replacement parts
MANN-FILTERmain element
C 19 450
MANN-FILTERsecondary element
CF 450
Replacement filter elementSize
ENTARON 10
Cover
40 450 17 999
Dust valve
39 000 40 731
Filter elements
Cover
Dust valve
Entaron en Klapp:Entaron en Klapp 30.06.2011 11:36 Uhr Seite 1
The ENTARON was developed especially to meet the re-quirements of next generation machines. The increasingcomplexity of exhaust systems today makes the availableinstallation space more and more important.
In fact installation space is not just important when fitting thefilter to the machine. The task of servicing the filter in a tightand hot engine compartment makes efficient use of the instal-lation space a must. In addition, replacement of the filter ele-
5
The filter elements of the new ENTARON are designed tohandle demanding applications:
A patented sealing system ensures reliable sealing betweenelements and housing.
A robust middle tube made from plastic reinforces the filterelement and therefore protects the machine.
The safety element in the ENTARON is screwed to thehousing to prevent the possibility of unintentional removaland to ensure reliable function of the filter.
High performance filter elements
Filter servicing
Step 1Open the locking devices andremove the cover.
Step 2Remove the used element and insert the new one. Pleasenote: the ENTARON filter elements are firmly screwed insidethe housing. When removing the element turn anti-clockwiseto unscrew and take out the element. When fitting the newelement, manually screw the element clockwise screw intothe housing until it locks.
Step 3Replace the cover in thecorrect position and closethe plastic locking devices.The locking devices will onlyclose if the cover is in itscorrect position.
ment has to be easy and quick to carry out. The ENTARONfilter from MANN+HUMMEL solves this problem using anewly-developed system to combine use of well-establishedconcepts (e.g. tie rods) with modern handling (e.g. lockingdevice on the service cover). This enables filter servicing fromthe end of the filter without having to grip around the filter.Field trials and tests with service technicians in the constructi-on industry have confirmed the effectiveness of the concept!
open open
close
close
Entaron en Klapp:Entaron en Klapp 30.06.2011 11:36 Uhr Seite 2
W994120801en0711PrintedinGermany
MANN+HUMMELGMBH
MANN+HUMMEL Group
The MANN+HUMMEL Groupis an international companywith its headquarters inLudwigsburg, Germany.The group employs approx.13,200 people worldwide atmore than 41 locations.
The company develops, pro-duces and sells technicallycomplex components for theautomotive and other
industries. A key area is highquality filtration productsfor vehicles, engines andindustrial applications. TheOEM business with globalmarket leaders and pro-ducers of vehicles, machinesand installations defines thequality and performanceof the group. Filters for theinternational aftermarket aresold under numerous inter-
national brands as well asunder the MANN-FILTERbrand.
MANN+HUMMELIndustrial Filters
The Industrial Filters BusinessUnit with its headquarters inSpeyer, Germany is spe-cialised in meeting therequirements of off-highway
vehicle and engine appli-cations, compressed airand vacuum technology,mechanical engineering andplant construction. For theseand other industrial fieldsMANN+HUMMEL IndustrialFilters offers high perform-ance products for the fil-tration and separation of air,gases and liquids.
MANN+HUMMEL company
Joint venture company
MANN+HUMMEL GMBH, Business Unit Industrial Filters67346 Speyer, Germany, Telephone +49 (62 32) 53-80, Fax +49 (62 32) 53-88 99
E-Mail: if.info@mann-hummel.com, Internet: www.mann-hummel.com
Entaron en:Entaron en 30.06.2011 11:39 Uhr Seite 4
Recommended