View
21
Download
0
Category
Tags:
Preview:
DESCRIPTION
External Interfaces and the Connector Board. 2x GigE. 2x Camera Link. 10/100 Ethernet. Power Supply. External INS. Connector Board. D3 OEM Board. External Interfaces and the Connector Board. Power Supply. External INS. 2x Camera Link. 2x GigE. RCA output. 10/100 Ethernet. - PowerPoint PPT Presentation
Citation preview
External Interfaces andthe Connector Board
Interfaces Specified Originally
2x Camera Link camera 2x Gigabit Ethernet camera
Power Supply (9V to 36V) 10/100 Ethernet
External Inertial Navigation System
Power Supply
External INS
2x GigE 2x Camera Link 10/100 Ethernet
Connector Board D3 OEM Board
External Interfaces andthe Connector Board
Final Interfaces Specified
2x Camera Link camera 2x GigE camera
Power Supply (9V to 36V) 10/100 Ethernet
External Inertial Navigation System RCA output
USB port
PowerSupply
2x Camera Link
External INS
RCA output
USB port
2x GigE
10/100 Ethernet
Connector Panel
External Interfaces andthe Connector Board
• Goal:– All interfaces routed through and mounted on the
Connector Board• Reality:– Various different mountings and routings
necessary
Interface Routing andConnector Mounting
Through the Connector Board Routed Elsewhere
Board Mount 2x Camera Link camera 2x GigE camera
Panel Mount
Power Supply (9V to 36V) 10/100 Ethernet
External INS RCA output
USB port
Power Supply2x Camera Link External INS
•2x Camera Link = nearly full width of Connector Board
Connector Panel
Interface Routing andConnector Mounting
Through the Connector Board Routed Elsewhere
Board Mount 2x Camera Link camera 2x GigE camera
Panel Mount
Power Supply (9V to 36V) 10/100 Ethernet
External INS RCA output
USB port
2x GigE
•GigE mounted on FPGA Board
FPGA Board (bottom view)Connector Panel
Interface Routing andConnector Mounting
Through the Connector Board Routed Elsewhere
Board Mount 2x Camera Link camera 2x GigE camera
Panel Mount
Power Supply (9V to 36V) 10/100 Ethernet
External INS RCA output
USB port
RCA output
10/100Ethernet
D3 OEM Board (top view)
•RCA and 10/100 Ethernet routed directly to D3 OEM Board
RCA
Connector Panel
10/100 Ethernet
Through the Connector Board Routed Elsewhere
Board Mount 2x Camera Link camera 2x GigE camera
Panel Mount
Power Supply (9V to 36V) 10/100 Ethernet
External INS RCA output
USB port
Interface Routing andConnector Mounting
USB port
Connector Panel
•USB routed directly to internal GNSS receiver
The Connector Board
• Having determined what it needs to do, design could commence
Customer Provided Block Diagram
Connector Board Design:Functional Block Diagram
Connector Board Design:Scale Diagram
Inertial Navigation System (INS)
• Determines:– Direction• Roll, pitch & yaw
– Velocity • Inertial Measurement Unit (IMU)
– Location• Global Navigation Satellite System (GNSS)
– Global Positioning System (GPS)– GLONASS
Global Navigation Satellite System
• Customer Specified– NovAtel OEMV-2 or OEMV-3• RS-232 interface• Different power requirements
OEMV-2: 3.3 +5%/-3% VDC OEMV-3: 4.5 to 18 VDC
GNSS Software
Recommended