View
7
Download
0
Category
Preview:
Citation preview
Furniture & Equipment for the Medical World2013
EXAMINATION COUCHES & CHAIRS
02Examination Couches & Chairs Variable Height Examination Couches
• Electric Versions:• Adjustable 485 - 855mm• Mains Powered electric actuator (240 volt electrics supply) fitted with UK
3 pin plug• Choice of hand or foot switch operation (model dependent)
• Hydraulic versions:• Adjustable 485 - 855mm• Hydraulic actuator• Foot pump pedal positioned on both sides of couch
• Head section offers angle adjustment from horizontal to 90 degrees using a gas strut
• Seamless & contoured upholstery using flame retardant vinyl• Paper roll holder fitted to head end* (suitable for rolls max. 510mm wide x
200mm diameter) with hook to support hand switch• 50mm fixed wheels at head end• Retractable 75mm swivel castors at foot end with adjustable feet to allow
levelling on uneven floors• Maximum load 190kg
*Can be repositioned at foot end
Features
Overall Dimensions (w x d x h)
• 610 x 1840 x 485-855mm
Standard Colours
• Paint - White• Vinyl - Bristol Blue (Please see colour chart for alternative upholstery colours)
Item Description Weight
EC025/BB Examination Couch - Electric, Hand Switch 67.3kg
EC030/BB Examination Couch - Electric, Foot Switch 67.3kg
EC045/BB Examination Couch - Hydraulic 67.2kg
Examination Couch - Variable Height, Two Section, Swing Lift
email: sales@bristolmaid.com fax: +44 (0)1258 455056
EC045/BBOptions
• EC905 - Side rails, fold down (pair)• EC910 - Adjustable armrest• EC915 - Breather hole & plug
Bristol Blue Aqua Marine Forest Green Flame Red Granite Blue Graphite Onyx Black Sand Dune
BB AQ FG FR GB GH OB SD
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e. Two Section, Swing Lift, Variable Height Examination Couch in Aqua Marine - EC025/AQ
BS 5852:2006
Service Contract AvailablePlease Contact Customer Services
03Variable Height Examination Couches
• Electric Versions:• Adjustable 485 - 855mm• Mains powered electric actuator (240 volt electrics supply) fitted with UK
3 pin plug• Choice of hand or foot switch operation (model dependent)
• Hydraulic versions:• Adjustable 480 - 850mm• Hydraulic actuator• Foot pump pedal positioned on both sides of couch
• Head section offering angle adjustment from horizontal to 90 degrees, by means of a gas strut
• Seamless & contoured upholstery using flame retardant vinyl• Foot section offers angle adjustment from horizontal to 90 degrees, using a
gas strut • Paper roll holder fitted to head end (suitable for rolls max. 510mm wide x
200mm diameter) with hook to support hand switch• 50mm fixed wheels at head end• Retractable 75mm swivel castors at foot end with adjustable feet to allow
levelling on uneven floors• Maximum load 190kg
Features
Overall Dimensions (w x d x h)
• 610 x 1935 x 485-855mm
Standard Colours
• Paint - White• Vinyl - Bristol Blue (Please see colour chart for alternative upholstery colours)
Item Description Weight
EC035/BB Examination Couch - Electric, Hand Switch 70.0kg
EC040/BB Examination Couch - Electric, Foot Switch 70.0kg
EC050/BB Examination Couch - Hydraulic 69.9kg
Examination Couch - Variable Height, Three Section, Swing Lift
Examination Couches & Chairs
EC035/BB
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
Hand Switch
Foot Switch
Options
• EC905 - Side rails, fold down (pair)• EC910 - Adjustable armrest• EC915 - Breather hole & plug
Bristol Blue Aqua Marine Forest Green Flame Red Granite Blue Graphite Onyx Black Sand Dune
BB AQ FG FR GB GH OB SD
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e. Three Section, Swing Lift, Variable Height Examination Couch in Aqua Marine - EC035/AQ
BS 5852:2006
Service Contract AvailablePlease Contact Customer Services
Variable Height Examination Couches
• Height adjustable from 560-1000mm• Scissor action provides vertical lift, ideal for use in confined areas where
space is limited• Mains powered electric actuator (240 volt electrical supply) fitted with a UK 3
pin plug• Choice of hand or foot switch operation (model dependent)• Head section offers angle adjustment from horizontal to 90 degrees using a
gas strut• Seamless & contoured upholstery using flame retardant vinyl• Paper roll holder fitted to foot end* (suitable for rolls max. 510mm wide x
200mm diameter) with hook to support hand switch• 125mm swivel braking castors• Maximum load 190kg
*can be repositioned at head end
Features
Overall Dimensions (w x d x h)
• 1825 x 600 x 560 -1000mm
Standard Colours
• Paint - White• Vinyl - Bristol Blue (Please see colour chart for alternative upholstery colours)
Item Description Weight
EC015/BB Examination Couch - Electric, Hand Switch 53.8kg
EC020/BB Examination Couch - Electric, Foot Switch 54.0kg
Examination Couch - Variable Height, Two Section Vertical Lift
email: sales@bristolmaid.com fax: +44 (0)1258 455056
EC015/BB
Hand SwitchFoot Switch
Bristol Blue Aqua Marine Forest Green Flame Red Granite Blue Graphite Onyx Black Sand Dune
BB AQ FG FR GB GH OB SD
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e. Two Section, Vertical Lift, Variable Height Examination Couch in Aqua Marine - EC015/AQ
Options
• EC905 - Side rails, fold down (pair)• EC915 - Breather hole & plug
BS 5852:200604Examination Couches & Chairs
Service Contract AvailablePlease Contact Customer Services
Fixed Height Examination Couches
• Head section offers angle adjustment from horizontal to 90 degrees using a ratchet
• Seamless & contoured upholstery using flame retardant vinyl• Paper roll holder fitted to foot end (suitable for rolls upto 510mm wide and
200mm diameter)• Adjustable feet allow independent levelling on uneven floors• Available factory assembled or for self assembly• Maximum load 125kg
Features
Overall Dimensions (w x d x h)
• 1830 x 610 x 795mm
Standard Colours
• Paint - White• Vinyl - Bristol Blue (Please see colour chart for alternative upholstery colours)
Item Description Weight
EC005/BB Examination Couch - Assembled 29.0kg
EC010/BB Examination Couch - Self Assembly 29.0kg
Examination Couch - Fixed Height, Two Section
EC005/BB
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
EC010/BB
Bristol Blue Aqua Marine Forest Green Flame Red Granite Blue Graphite Onyx Black Sand Dune
BB AQ FG FR GB GH OB SD
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e. Two Section, Fixed Height Examination Couch in Aqua Marine - EC005/AQ
Options
• EC900 - Drawer• EC935 - Side rails, drop down (pair)• CS005 - Couch step (Page 106)• CT005/CT010/CT015 - Low level trolley with drawers (page 106)
BS 5852:2006
EC005/BB Shown with optional CS005 step, CT010 trolley & EC900 Drawer
height adjustable ratchet on head section
05Examination Couches & Chairs
Couch Steps
email: sales@bristolmaid.com fax: +44 (0)1258 455056
CS025CS005
CS015
• Non slip/non marking rubber feet and tread• Available with a handle for additional safety (fitted to right hand side of step)• Maximum load 125kg
Features
Standard Colours
• Paint - White
Item Description Overall Dimensions Weight
CS005 One Tread 280 x 510 x 223mm 4.4kg
CS010 One Tread, Handle 280 x 510 x 1000mm 6.0kg
CS015 Two Tread 618 x 510 x 369mm 9.6kg
CS020 Two Tread, Handle 618 x 568 x 1186mm 12.4kg
CS025 Three Tread 905 x 510 x 578mm 15.8kg
CS030 Three Tread, Handle 905 x 568 x 1375mm 19.6kg
Couch Steps - One, Two & Three Tread
CS010 CS020 CS030
06Examination Couches & Chairs
• Low level single column procedure trolley• One piece welded frame (requires no on-site assembly)• Quick and complete disassembly of top and side panels allowing access to all areas for
cleaning• Removable recessed plastic top (max load 30kg)• Moulded side panels incorporate runners with positive stops, preventing trays from being
accidentally withdrawn• 100/160mm deep translucent high impact plastic trays with integral handle (max load per
tray 5kg)• Each tray is supplied with plastic clip on label cover & four removable dividers (2 x long & 2 x
short)• Each trolley is supplied with perforated coloured label strips (white, blue, green, yellow & red)• Ring buffers• 100mm castors, 2 off braking
Features
Caretray Trolleys - Low Level, Single Column
Standard Colours
• Paint - White
Dimensions (w x d x h)
• Overall - 575 x 575 x 655mm
Item Description Weight
CT005 3 x 100mm Trays 11.4kg
CT010 2 x 100mm, 1 x 160mm Trays 12.0kg
CT015 2 x 160mm Trays 11.5kg
EC005/BB Shown with optional CS005 step, CT010 trolley & EC900 Drawer
Examination Chairs
• Seat section 510 x 465 at height 695mm
• Contoured head section offering angle adjustment from horizontal to 90 degrees by means of a gas strut
• Height adjustable armrests (optional tilt)
• Seamless & contoured upholstery using flame retardant vinyl
• Maximum load 160kg
Features
Overall Dimensions (w x d x h)
• 810 x 750 x 1220mm
Standard Colours
• Paint - White• Vinyl - Bristol Blue (please see colour chart below for alternative upholstery
colours)
Item Description Weight
G/8/GS/BB Height Adjustable Arm Rests 32.0kg
G/8/GS/TILT/BB Tilt & Height Adjustable Arm Rests 33.0kg
Examination Chairs - Adjustable Arm & Leg Supports
Options
• G/TRAY - Stainless steel tray, fits to the front of chair leg
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
CS025
G/8/GS/TILT/BB
Bristol Blue Aqua Marine Forest Green
Flame Red Granite Blue
Graphite Onyx Black Sand Dune
BB AQ FG FR GB GH OB SD
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e. Examination Chair with Height Adjustable Arm & Leg Supports in Aqua Marine - G/8/GS/AQ
BS 5852:2006
G/7/GS/BB
• Seat section 510 x 465 at height 575mm
• Contoured head section offering tilt angle adjustment from horizontal to 90 degrees using a gas strut
• Height adjustable armrests (optional tilt)
• Seamless & contoured upholstery using flame retardant vinyl
• Maximum load 160kg
Features
Overall Dimensions (w x d x h)
• 810 x 750 x 1110mm
Standard Colours
• Paint - White• Vinyl - Bristol Blue (please see colour chart below for alternative upholstery colours)
Item Description Weight
G/7/GS/BB Height Adjustable Arm Rests 23.0kg
G/7/GS/TILT/BB Tilt & Height Adjustable Arm Rests 24.0kg
Examination Chairs - Adjustable Arm Supports
Options
• G/TRAY - Stainless steel tray, fits to the front of chair leg
Bristol Blue Aqua Marine
Forest Green
Flame Red Granite Blue
Graphite Onyx Black Sand Dune
BB AQ FG FR GB GH OB SD
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e. Examination Chair with Adjustable Arm Supports in Aqua Marine - G/7/GS/AQ
BS 5852:200607
Examination Couches & Chairs
email: sales@bristolmaid.com fax: +44 (0)1258 455056
• Dimensions are stated in millimetres (width x depth x height)• Weights are stated in kilograms• Please ensure you are aware of the item size and weight prior to ordering
Dimensions & Weight
• All castors are fitted with non-marking tyres (with the exception of some anti-static versions)
• Anti-static castors can be identified by a yellow thread guard or a yellow mark on the edge of the tyre
• Castors are selected to suit the anticipated use of the trolley/piece of equipment
• Castors and wheel bearings do not require specific maintenance other than regular cleaning. The use of oil will breakdown the grease applied to the bearings, reducing the life of the castor. We recommend that fittings are checked regularly and re-tightened as required
• Where anti-static castors are fitted, we recommend that the tyre is periodically cleaned to remove any dirt to ensure a good contact between the tyre and the floor
Castors
• Locks should operate smoothly. If they do not, please arrange urgent attention and where necessary obtain a replacement
• Locks require only minimal maintenance and should only be lubricated using a dry lubricant such as graphite which can be purchased from most locksmiths (NEVER USE OIL)
• When ordering replacement locks or keys, please ensure that the product code, and any letters/numbers from the key and lock are available
Locks & Keys
Paint
• We use 304 and 430 grade stainless steel• Grade 304 is non-magnetic and used on products which are not painted• Grade 430 is magnetic and used on painted products• Other grades are available on request, i.e. 316• Please note that the term ‘stainless’ is not entirely accurate, as certain chemicals
can ‘eat’ into the surface. In particular ‘iodine’ which can badly corrode/stain and as a result should not be used as a cleaning agent
Stainless Steel
• Wood products are manufactured from FSC accredited materials• High pressure laminate bonded to MDF• Melamine faced MDF
• Edges are protected with 2mm ABS/T-Barb edging or sealed with varnish• Both laminate and melamine panels offer some resistance to water penetration
under normal usage• We only use water based adhesives and varnishes
Laminate & Wood Products
• Upholstered panels are manufactured from ‘Flame Retardant’ materials, independently tested to ‘BS5852 Ignition Source 5’ (BS7176 Medium Hazard)
• Vinyl’s offer resistance to:• Melsept SF - Code CH - B:4422M32 (0.5% / 5%)• Hexaquart S - Code CH - B:406432 (1.5% / 5%)• Meliseptol - Code CH - B:4273M92 (Undiluted)
• All foam is ‘Fire Retardant’ and free of ‘Hexa-Bromo-Cyclo-Dodecane’
Upholstery
• All products are latex free
Latex
• We only use lead-free epoxy/polyester powder paint• Where possible colours are applied in special booths to allow for overspray to be
recycled• Alterative colours are available, this may be incur a small surcharge
General Information
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• The maintenance of high standards of cleanliness on all surfaces and equipment is a crucial factor in the prevention and control of infection. Whilst dust, dirt and moisture can harbour infection, the key risks are associated with contamination arising from contact with blood, body fluids, mucous membranes and damaged skin. In all cases surfaces must be thoroughly cleaned and disinfected in order to destroy pathogenic micro organisms.
• Bristol MaidTM products have been designed for use in demanding environments; full cleaning instructions can be downloaded from www.bristolmaid.com
Cleaning
Hospital Metalcraft meets its obligations as a business to business producer of Electrical and Electronic Equipment (EEE) through:
• Membership of the Veolia Environmental Services WEEE, (Waste Electrical and Electronic Equipment), Producer Compliance Scheme (Registration No. WEE/KE0677RX)
• Marking EEE placed on the market by Hospital Metalcraft with the mandatory crossed out wheeled bin symbol and Bristol Maid logo
• Making information available, (for EEE placed on the market after April 2007), to assist those engaged in treatment, recovery and recycling activities
• Arranging for the collection, treatment, recovery and environmentally sound disposal of obligated WEEE
Customers are advised that infected medical devices are not included within the scope of the WEEE Regulations and that arrangements described above do not extend to such products
Bristol Maid website (www.bristolmaid.com) and Terms & Conditions refer
WEEE Regulations
Standards & Symbols
Signifies that the product conforms with applicable European directives
Meets appendix A (StabilityRequirements) of BS3619:1976 MobileInfusion Stands
Signifies that the product has been tested to European standards for electromagnetic compatibility
Meets BS4068: 1977 Specification for hospital trolleys for instruments, dressings and for anaesthetists’ use
Signifies that the product does not use any hazardous substances in its electrical components
Meets BS1765: Part 1: 1990 Specification for general purpose bedside lockers for patients (with the exception of door hinges which are more robust and practical)
Flame RetardantMeets BS2483:1977 Specification for overbed tables
Resistant to Cold LiquidsFive Pin - BS3621 Anti Pick & Drill, Key Retaining Five Pin Cylinder Lock
Resistant to Mechanical DamageSix Pin - BS3621 Anti Pick & Drill, Key Retaining Six Pin Cylinder Lock
Department of Health Green Book
Independently tested to BS2881: 1989 (Security Level One) Specification for Cupboards for the Storage of Medicines in Health Care Premises
Independently tested to UN3291 - Certificate of Packaging Performance for the Transportation of Clinical Waste
Meets The Misuse of Drugs (Safe Custody) Regulations 1973
General Information
Paint Colours (Lead-free Epoxy/Polyester)
Upholstery Colours (Flame Retardant)
Laminate Colours
White Red Spearmint Light Grey
Black Orange
Signal Yellow Signal Blue Signal Green Signal Blown
Purple
Granite Blue Sand Dune Forest Green Graphite
Bristol Blue Flame Red Aquamarine Onyx Black
Cream Claro Lagon Bianco Especial
Chene de Meymac
Gris Paloma
Charme d’Amboise
Please note that due to discrepancies with colour reproduction the shades depicted here may differ slightly from the finished product
Melamine
Ivory Spearmint Beech
email: sales@bristolmaid.com fax: +44 (0)1258 455056
How to Order
How to Order
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
• All orders are required in writing, either by fax, email or post. Unfortunately we cannot accept orders over the phone• Orders should be submitted as an ‘official purchase order’ on company headed paper. All information should be clearly
displayed• Your order should contain the following - invoice address, delivery address, full contact details (name, phone & fax number)
item codes along with descriptions and prices• If applicable, please ensure our quote number is detailed on your order to ensure any agreed discounts are applied• Item codes and descriptions in this catalogue supersede all previous editions• A full price list can be requested from our website• Payments can be made by cheque, bank transfer or credit/debit card (with the exception of American Express)• If you are a new customer, the first three orders will be processed on a proforma basis, paid in full prior to manufacture &
delivery, after which a credit account may be applied for• For our terms and conditions refer to www.bristolmaid.com• For further information and assistance, please contact our customer services team on +44 (0) 1258 484455
How To Order
Bristol Maid™ has wide ranging experience in the facilitation and project management of tenders and contracts. Through many years’ experience we are uniquely placed to support our customers in the selection, delivery, installation and commissioning of both large and small projects.
To discuss your tender or contract requirements please contact our Customer Services Team.
• Site audit and equipment recommendations• Full project management• Scheduled deliveries• Product placement and removal of packaging• Installation and commissioning• Training
Tenders & Contracts
Bristol Maid™ products are designed and manufactured to meet the demands of everyday use, with the majority of our products under normal conditions providing many years of trouble free service.
Where annual maintenance or periodic inspections are required, we are able to offer comprehensive planned preventative maintenance through a scheduled service contract or call out by our own trained Engineers. For your peace of mind and continued product reliability, please contact our customer service team for details on the following services.
• Preventative maintenance contracts & packages• Supply of spare parts• Site audit and equipment recommendations
Preventative Maintenance, Spares & Service Support
Custom Design & Manufacture
If you have been unable to find a product that exactly meets your requirements, then please contact us so we can work together to develop a solution that will exactly match your needs. Our design capability allows us to provide everything from minor product specification changes through to a full design & development service.
Ian MillsSales Support EngineerSouth07921 473241imills@bristolmaid.com
Eric HornbySales Support EngineerNorth07702 000953ehornby@bristolmaid.com
Sales Support
email: sales@bristolmaid.com fax: +44 (0)1258 455056
Meet The Team
Steve Poller07711 095899spoller@bristolmaid.com
Chris Farmer07768 057675cfarmer@bristolmaid.com
Jeremy Russell07889 659611jrussell@bristolmaid.com
James Maplethorpe07887 534755jmaplethorpe@bristolmaid.com
John Baines07876 441477jbaines@bristolmaid.com
Tim Pascoe07725 543862tpascoe@bristolmaid.com
National Sales Manager
Ian Farnfield01258 451338ifarnfield@bristolmaid.com
Sales Director
Sales Representatives
Paul OpenTechnical Services Manager01258 451338popen@bristolmaid.com
Sales Hotline: +44 (0)1258 484455 www.bristolmaid.com
Meet The Team
Lauren AmosCustomer Service Team Leaderlamos@bristolmaid.com
Sam NewtonAssistant Customer Service Team Leadersnewton@bristolmaid.com
Mark ChampionCustomer Service Co-ordinatormchampion@bristolmaid.com
Tracy JacksonCustomer Service Co-ordinatortjackson@bristolmaid.com
Jo BarnwellCustomer Service Assistantjbarnwell@bristolmaid.com
Ben SpreadburyCustomer Service Assistantbspreadbury@bristolmaid.com
Chris MorganExport Sales Manager+44 (0)7917 207617cmorgan@bristolmaid.com
Trudy ColeExport Co-ordinatortcole@bristolmaid.com
Customer Services
Export
Blandford Heights, Blandford Forum, Dorset. D11 7TG, UKTel: +44 (0) 1258 451338
Fax: +44 (0) 1258 455056
sales@bristolmaid.com
www.bristolmaid.com
Based in Blandford Forum, Dorset we design, manufacture and distribute the extensive range of Bristol Maid™ medical furniture together with other complimentary products from selected partners. With a broad portfolio and a comprehensive support team we are proud to provide a responsive and flexible service to meet our customer’s needs.
With over 60 years experience, the Bristol Maid™ brand has become synonymous with quality, durability and reliability, with a wide range of customers including the NHS, Private Healthcare Sector, Pharmacies and a growing network of Distributors throughout the UK, Ireland and many other countries around the world.
Working with our customers we are continually developing and enhancing our product ranges to ensure that they are fit for purpose, easy to use, reliable and above all represent value for money. We hope that you find this catalogue useful and welcome your suggestions on any improvements.
Welcome to the Latest Edition of the Bristol Maid™ Medical Furniture & Equipment Catalogue
Recommended