View
247
Download
3
Category
Preview:
Citation preview
Evaporators Falling or rising film
Modern evaporators designed foroptimal performance and reliability
Easy installation • Local fabrication ensures rapid delivery and lower cost• Easy adaptation: small footprint; outdoor installation possible;
easy integration in existing multiple effect stations
Outstanding performance• High heat-exchange coefficient for both beet and cane
applications thanks to specific and well adapted designs
• Low ΔT on all juices (high or low brix)
Unrivalled reliability• Integrated skirt protects the tube bundle from vibrations• Proven designs ensure maximum sugar yield
Easy maintenance • Falling film (beet design): low risk of fouling and minimal juice
colour increase thanks to short retention time• Falling film (cane design): removable upper part facilitates
cleaning (cleaning frequency reduced by 2 to 3)
www.fivesgroup.com Driving Progress
Fives Cail has been providing outstanding evaporators to its customers
for more than 150 years. Drawing on this long experience, the Group
continues to revolutionize evaporator technology by efficiently
adapting the falling film to cane sugar processing. It has built the
world’s largest evaporator, with an exchange area of 7,540 m².
Fives Cail now offers 3 distinct evaporator designs perfectly adapted
to beet and cane sugar plants and refineries: rising film evaporators,
and distinct falling film models for beet and cane sugar.
With more than 500 units sold, Fives Cail evaporators are
acknowledged for their excellent heat-exchange performance,
minimal colour increase and entrainment.
Rising film evaporators Improved climbing performance
Very clear improvement of heat exchange by steam Injection in the juice: installation of aspecific ejector
Heat exchange performance Optimal steam distribution in the calandria High heat exchange coefficient Efficient extraction of non-condensable gases
Juice outlet Ring outlet for concentrated juice
.ylno noitamrofni rof ata
D – KD snoitcudorP
GM : stiderc erutciP
Rising film evaporator station - ITALY
Kestner-type Fives Fletcher rising film evaporator, 4,000 m² - GUADELOUPE
Total exchange surface 1,000 - 10,000 m²
Average tube diameter 35 mm
Tube length8 - 12 m (Falling film)
2.5 - 4.5 m (Rising film)
Falling film evaporators
Juice colour increase Minimal colour increase thanks to short retention time
Juice distribution Patented designs specifically adapted for cane and beet applications Uniform distribution of juice Low ∆T on all juices (high or low brix) Option: double juice circulation
Heat exchange performance Excellent heat exchange: optimal steam distribution Consistent steam circulation by recovery of non-condensable circulation gases at the center of the calandriaLow rate of tube fouling
Calandria reliability An integrated skirt ensures mechanical protection of the calandria Calandrias available in various materials: carbon steel, stainless(ferritic or austenitic)
1 The jet is divided into 6 and directed to surrounding distribution plugs
2 Uniform juice distribution over the whole evaporator diameter
3 Juice distribution in a thin film on the tube walls for high efficiency
Patented juice distribution system for sugar-beet
Steam distribution system during heat exchange
1 Skirt protects the calandria against vibrations
2 Recovery of non-condensable gases
3 Offset calandria to ensure uniform steam distribution over the whole surface
1
3
2
1
2
3
Evaporator or complete station
Falling film evaporatorbeet sugar model7,540 m²
Falling filmevaporator station
11,600 m²
Rising film evaporators - KENYA
Customized equipment
Low operating cost
Ease of use
Cleanliness / Hygiene
Yield / Productivity
Safety
Fives Cail - KCP LimitedHead OfficeRamakrishna Buildings, No.2, Dr. P. V. Cherian Crescent, Egmore, Chennai - 600 008 (India)Tel: +91 44 6677 2755, Fax: +91 44 6677 2799, E-mail: fivescail-kcp@fivesgroup.com.
Fives FletcherTel.: +44 (0)1332 636000Fax: +44 (0)1332 636020fivesfletcher@fivesgroup.com
Recommended