View
9
Download
0
Category
Preview:
Citation preview
T P M S
ENGLISH
User Guide
CY-TM01
Tire Pressure Monitoring System
Chi Yu Tech. Co., Ltd.
Contents
TPMS Sensor
Android APP
Bluetooth
Starting Your APP
Troubleshooting
TPMS Reader
Sensor Assemble………………………………………….…8.
Reader Install………………………………………………......1.
Power On Self Test……………….………...………………...1.
Download APP...……………………………………….…...…2.
App Install…………….………...……………………………...2.
Bluetooth Setup…..………………………………………..…..3.
Bluetooth Pair…………….………...……………………...…..3.
Start APP……………..…………………………………..…….4.
Connect Bluetooth…..…………………………………….…..4.
Tire Pair……….………...………………………..……....…….5.
Set Standard Alarm……….………...…………………….…..5.
Change Units……………….………...…………………....…..6.
Exit APP……….………...…………………….……...….…….6.
Alarm ………………….………………………………….…….7.
Chi Yu Tech. Co., Ltd.
Plug USB Cigarette Lighter
to Cigarette Lighter slot
Connect USB Cable to TPMS Reader
Connect USB Cable to USB
Cigarette Lighter
After ACC turns ON, a self test procedure will
start and raise Be-Beep sound while complete.
Reader Install
TPMS Reader
Reader Picture
TPMS Reader USB Cigarette USB Cable
Power ON Self Test
-1-Chi Yu Tech. Co., Ltd.
Download APP
Android APP
APP Install
-2-
• Use Android Smart-phone download from Google Play or above link or QR-Barcode scanner. • Click install and make sure you promise the permission to install the APP.• After install succeeded, you should see the TPMS icon on your applications.• Note: Before using this APP., you must setup Bluetooth correctly, please refer “Bluetooth” chapter.
Searching Google Play with keyword
“TPMS Chi Yu”
Go to following linkhttps://play.google.com/store/apps/details?id=com.chyt.tpms
Use Android QR-Barcode Scanner
There are 3 ways to Download the APP
1
2
3
Chi Yu Tech. Co., Ltd.
Bluetooth Setup
Bluetooth
Bluetooth Pair
• Open Your Application• Select Option
• Select Bluetooth on Setup Options
• Turn ON Bluetooth function
• Select Bluetooth Device Named “HC-05”
• Select Search Device • Input Pair Key “1234”
-3-Chi Yu Tech. Co., Ltd.
Start APP
Starting Your APP
Connect Bluetooth
• Look up your applications, select TPMS icon.
• Select Bluetooth icon to connect to TPMS Reader.• While TPMS Sensor information read, the tire animation will start.
-4-Chi Yu Tech. Co., Ltd.
Tire Pair
• Select a tire which you want to pair, you will hear Beep sound if you select correctly.• Select the Pair icon to start pairing, you will hear Be-Beep sound if you select correctly.• Take TPMS Sensor close to TPMS Reader until hear Be-Beep sound which means pair completed.• Repeat the procedure above until all 4 TPMS Sensor paired.• Note: Do not operate this function unless you has to change new TPMS Sensor or swap tire position.• Note: After sensor pair, you could assemble it to tire, please refer “Sensor Assemble” chapter.
Set Standard Alarm
• Make sure all 4 TPMS Sensors are read and tires are at standard pressure.• Select Alarm icon.• After Confirm, TPMS Reader will set alarm value to ±20% of current value and make Be-Beep sound.• Note: This function may operate after you blow your tires up to normal pressure.
Starting Your APP
-5-Chi Yu Tech. Co., Ltd.
Exit APP
• Select Exit icon to close APP.
Change Units
• Select Unit icon to change display units.
Starting Your APP
-6-Chi Yu Tech. Co., Ltd.
Alarm
Starting Your APP
• There are 5 kind of alarm below, while any kind of alarm aroused, your phone and TPMS Reader will make alarm sound and display alarm message.
• Tire animation will swell, and text color will turned red when TPMS Sensor goes abnormal.• Touch the message will stop alarm sound and bring APP display back if APP is hiding.• Touch the animation tire could stop Be-Beep sound on TMPS Reader.• Note: After ACC turns OFF, Bluetooth Not Response may aroused, you could just close your APP.• Note: If APP does not running, any tire abnormal may cause TPMS Reader alarm and make Be-Beep sound, you
should start the APP and check what’s going on.
Tire pressure is too high or too low.please check your tire pressure or standard alarm value setting.
Sensor does not response, this may caused by a sensor fail or battery drain.
Bluetooth does not response, this may caused by a reader fail or sensor signal too weak.
Tire temperature too high, please check your tire temperature.
Sensor battery too low may cause signal abnormal, please change a new one and re-pair the sensor.
-7-Chi Yu Tech. Co., Ltd.
Remove original valveReplace with new valve
Adjust valve position, use wrench to fix the valve
Tighten the nut, make sue torque value must be 44±0.5Nm
Assemble completed
Sensor Assemble
TPMS Sensor
-8-
TPMS Sensor Valve
•Note: It’s recommended pair all TPMS sensor before you assemble them to your tire.
Chi Yu Tech. Co., Ltd.
THANK YOU!!!
TPMSYou can read this documentation online : http://www.chyt.com.tw/tpms/cytm01/tpms_manual_en.pdf
Chi Yu Tech. Co., Ltd.
Recommended