View
20
Download
1
Category
Preview:
Citation preview
In the name of God
Pishgam is The first knowledge base company in the field of valve industry and
member of Pardis Technology Park
Active in oil , gas and petrochemical industries.
Company Profile
Page | 1
Introduction
History:
experience of pishgam Managers in the field of valves opening to the beginning of the 70 solar elderly,
due to the increasing needs of the country, domestic companies began to work on manufacturing these products
were acting. According to the knowledge-based activities, as the first members, played a role in localizing the
products.
The first contract in designing valves family PLUG, was signed and resulted in the successful design
and prototyping of about seventy-five product families PLUG valves in sizes 1 "to" 20 classes 150, 300 and
600 were. After completion of product design, prototypes have been developed on the basis of documents,
were produced and after the tests and experiments were approved by the National Iranian Gas Company.
The company pishgam the official, was registered in 2002 in Tehran. In 2003, based on studies in the
field of market and product and based on a systematic and long-term Plan, engineering and design activities to
achieve production of industrial ball valves contract on its agenda.
Research and development as driving the company in product development, During the prototyping
program to produce knowledge and to enhance the range of products and makes the day-to-day help to increase
market share. the most important headlines of the Company are as follows:
Beginning End Plan Description 2001 2002 design andprototyped of ballvalves up to size 6 inch
Class300 for gas co Production of ball valves was created for the first time
in Iran established
2003 2006
Developing products range up to size 16 inch class 600
and producing all welded valves
production of Gearbox as operator of oil, gas and
petrochemical valves
All welded valves was produced in Iran for the first time
actuator production
was given to the partner company Pars paydar Enrgy.
2008 2010 Production of valves up to Size 8 inch in Class 900 for gas
industry The production products of this section has been done as
part of production was carried out by high pressure
products. 2011 2012 Valve production based on oil standards classes 2500
According Standard MR-0175 Samples of these products is produced
2013 2016 Production Gas Over Oil (GOO) Actuator and a
standard API 6A valve.
Production of Gas Over Oil (GOO) Actuator was in The
final stage prototyping and high pressure valves after
getting approval from prototyping and product API 6A
Ball valves contract worth 30 billion riyals concluded 2015 2017 Production of high pressure valves and valves ring
complete production technology CRA
Becoming a pioneer group in the field of valves
2017 2020 produced Valve by specific user (zero leakage, double,
high and low temperature)
Special reference to the production of valves Ball Valve
Infrastructure development company based on the creation of independent units and partners. They
can also increase the speed of growth, using market range supply a greater need in the market. The
creation of peripheral as spin-off companies to plan their development is chosen. Therefore, we can
mention the following companies active.
- Pars Paydar Energy company
- Petro pishtaz Atlas company
Page | 2
Board of Directors
Picture
Name Saeid Sadegh Mohammad
Family Jani Jani Alineghad
Position Chairman of the Board Manager Vice Chairman of the Board
Education PHD BS BS
Expertise Energy Conversion Mechanical Solid Industry
phone number +98912332310 +989121889509
e-mail Janiphd@yahoo.com S-jani@pishgam-ied.com
Sister companies Manger
Picture
Name Aliasghar Firoz
Family Galyanforoshan Akbari
Position
Managing director of Petro
Pishtaz Atlas
Managing director of Pars Paydar
Energ
education BS BS
Expertise Metallurgy Mechanical Solid
phone
number +989121976350 +989121930487
e-mail Aliasghar@petroatlas.ir
Page | 3
Factory: Golbarg-e-4 St. ,Narenjestan Blvd.,
Baharestan Blvd.,Shamsabad Industrial City,
Tehran ,Iran
Tel : (+98 - 21) 562 30 126
(+98 - 21) 562 33 641-2
Fax : (+98 - 21) 562 30 125
Introduce customer
Company has been able reference vendor list in the Ministry of Petroleum and valves
production is known as an internal reference. So, we are numerous customers have ever purchased
diverse products during the years in various projects and the company's products have been used.
Which quality of products leads to customer satisfaction and continuous have been buying. The
company is looking to expand knowledge specialization approach, is to hold Training courses for its
customers.
Page | 4
Products Company
Ball Valve
Row Product Name Technical Specifications Specific User
1
High Pressure
Valves
Size: NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24 ANSI Class 900
NPS 2, 2½, 4,6,8,10,12, 16, 20 Class 1500
NPS 2, 2½, 3, 4,6,12, Class 2500
Design Standards : ANSI/ASME B16.34/API 6D /ISO 14313
Dimension Standards : API 6D/ISO14313
Test Standards : API 6D/API 598 / ISO 14313
Marking Standards : API 6D/ISO14313
Types of Seat : Soft Seated
Connection Type: 1- Flanged ends – Ring Type joint
.According to ASME B16.5/ASME 16.47
2- Butt welding end According to ASME
B16.25`
Bore Type: 1- Reduce bore 2- Full bore
Body Type: Split body
Ball Type: Trunnion mounted
Operating device: Wrench /Gear box or Actuator Body Material: Carbon Steel / Alloy Steel
Ball Material: Carbon Steel with coating
Stem Material: Carbon Steel / Alloy Steel
Standard API
6D valves used
in refineries,
petrochemical,
Size: NPS=(2161 ∗ 116
13), 2161 , 216
9 , 381,( 38
1 ∗ 3163 ), 416
1 , ( 4161 ∗ 48
1),
(4161 ∗ 44
1) , 581, (716
1 ∗ 6), (7161 ∗ 68
3), ( 7161 ∗ 68
5) , 7161 , (716
1 ∗ 781) (For
class 2000, 3000 , 5000)
Size: NPS 11613216
1 ,2169 , 38
14161 ,(716
1 ∗ 683), 716
1 (For class 10000)
Design Standards : API 6A /ASME B16.34/
Dimension Standards : API 6ASection (10.5) /
Test Standards : API 6A (Annex F) /API 598
Marking Standards : API 6A/
Types of Seat : Soft Seated/Metal Seat
Connection Type: 1- Flanged ends – Ring Type joint .According to API 6A (Section
10.1)/ ASME B16.5/ASME 16.47
2- Butt welding end According to API 6A, Annex E/ ASME B16.25`
Body Type: Split body
Ball Type: Trunnion mounted
Operating device: Wrench /Gear box or Actuator Body Material: Material group in API 6A clause 4
Standard API
6A wellhead
valves and
used until the
refining
process
Page | 5
2
All welded
Vlave
Size: NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24 ANSI Class 900
NPS 2, 2½, 4,6,8,10,12, 16, 20 Class 1500
NPS 2, 2½, 3, 4,6,12, Class 2500
Design Standards : ANSI/ASME B16.34/API 6D /ISO 14313
Dimension Standards : API 6D/ISO14313
Test Standards : API 6D/API 598 / ISO 14313
Marking Standards : API 6D/ISO14313
Types of Seat : Soft Seated
Connection Type: 1- Flanged ends – Ring Type joint .According to
ASME B16.5/ASME 16.47
2- Butt welding end According to ASME B16.25`
Bore Type: 1- Reduce bore 2- Full bore
Body Type: Split body
Ball Type: Trunnion mounted
Operating device: Wrench /Gear box or Actuator Body Material: Carbon Steel / Alloy Steel
Ball Material: Carbon Steel with coating
Stem Material: Carbon Steel / Alloy Steel
valves
main gas
transmiss
ion lines
3
Small Ball
Valve
Size: NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 150 NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 300
NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 600
NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 800
NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 900
NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 1500
NPS ½,3/4,1, 1½,1,1-3/4 ANSI Class 2500 Design Standards : ANSI/ASME B16.34/API 6D /ISO 14313
Dimension Standards : API 6D/ISO14313
Test Standards : API 6D/API 598 / ISO 14313
Marking Standards : API 6D/ISO14313
Types of Seat : Soft Seated
Connection Type: 1- Flanged ends – Ring Type joint .According to
ASME B16.5/ASME 16.47
2- Butt welding end According to ASME B16.25`
3-thrade end
4- socketed end
Bore Type: 1- Reduce bore 2- Full bore
Body Type: Split body
Ball Type: Trunnion mounted
Operating device: Wrench / Actuator Body Material: Carbon Steel / Alloy Steel
Ball Material: Carbon Steel with coating
Stem Material: Carbon Steel / Alloy Steel
valves
used in
oil and
gas,
refinery
4
Split Valve
Size:
NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24,30,32,36 ANSI Class 150
NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24,30,32,36 ANSI Class 300
NPS 2, 2½,3,4,6,8,10,12,14,16,18,20,24,30,32,36 ANSI Class 600 Design Standards : ANSI/ASME B16.34/API 6D /ISO 14313
Dimension Standards : API 6D/ISO14313
Test Standards : API 6D/API 598 / ISO 14313
Marking Standards : API 6D/ISO14313
Types of Seat : Soft Seated
Connection Type: 1- Flanged ends – Ring Type joint .According to
ASME B16.5/ASME 16.47
2- Butt welding end According to ASME B16.25`
Bore Type: 1- Reduce bore 2- Full bore
Body Type: Split body
Ball Type: Trunnion mounted
Operating device: Wrench /Gear box or Actuator Body Material: Carbon Steel / Alloy Steel
Ball Material: Carbon Steel with coating
Stem Material: Carbon Steel / Alloy Steel
valves
used in
oil and
gas,
refinery
Page | 6
introduced the activities of research, development
As the engine driving the company's research and development department, which utilizes the forces
committed and has been able to design knowledge and BALL; PLUG valves in its compony.
Prototyping and approval as prototypes in order to obtain approval for new products has been an
integral part of work; By the Project Manager, all of the company's managerial and technical professionals;
lead in elderly.
Partner companies
Range increase production and improve knowledge and the company structure. in order to use the
infrastructure created, we established a new company with a mission to develop approaches units
defined.
Pars Paydar Energy company
Pars Paydar Energy co. started its activities in 2008 with the goal of designing and producing all kinds
of Gearbox of valves in oil and gas industry.
Gearbox of valves are generally two types of quarter round (Quarter Turn) and all round (Full Turn)
according to national and international standards are produced. Customer-satisfaction attitude of the company's
activities from the beginning has caused increasing Customers satisfactions, improving product quality,
innovation and continuous creativity, enhancing the effectiveness of technical support services healthy
competition with competitors is the most important and fundamental principles and values of the company's
activities. The main goals to satisfy all interested parties, ie customers, employees and shareholders which will
be followed by below principles.
First principle: to improve production through the creation of the necessary system requirements and
standards related to processes, activities and products.
The second principle: to provide products with competitive prices by using strategies such as reducing
waste and cycle time of the production process and improving the quality of equipment.
The third principle: innovate and deliver products with new designs with regard to views of customers.
Principle IV: improving quality of processes related to clients such as after-sales service.
The fifth principle qualification of human resources through staff continuous and effective training.
Article VI: optimal allocation of resources to achieve the goals and quality programs of products.
Page | 7
- Petro pishtaz Atlas company
Atlas co. considering the structural and managerial experience is stablished
and provides specialized services in the field of oil, gas and petrochemical
valves in the form of teamwork and quality management system.
According to standards, training, complement improve and implementation
of some important industrial process of group member companies taking agency of large international
companies repairing manufacturing and supply of oil, gas, and petrochemical industry valves through
a large network in the country is company strategy.
Fast and high precision by knowledge potential and access to critical resources and the use of existing
infrastructure in group companies, toward without factory production strategy and reduce the cost of
services is the most important competitive advantages of the company.
Because being knowledge base and doing specialized activities with the use of advanced science
and technology is important in the oil and gas and petrochemical industries; In planning goals
necessary infrastructure is considered develop in order to activities to provide better ability to
detect and respond to customers' needs.
The most important capital of the company is capable human resources which always tried to be
improved and updated knowledge and technical capacity in order to present specialized services
calmly and confidently to the customer.
most important work topics:
consulting and training services
Inspection and Technical Supervision
manufacture and supply of spare parts
improvement of of industrial valves including product changes, trim
after-sales service contracting companies
services and non-destructive testing NDT about valves Inspection
Supply valves
Manufacture of engineering components and assemblies
Page | 8
Certificates
Page | 9
Page | 10
Page | 11
Page | 12
Company Achievements
define a manufacturing company with design capabilities, manufacturing parts and product
accepted in the knowledge-based companies in vice presidency for science and technology.
earn Bronze level of Chamber of Commerce Industries and Mines
has the highest technical score in oil and gas tenders.
the first manufacturer of valves all welded valves in Iran.
the only company research and development department stablish certificate among valve
manufacturers.
member of valves specialized group of Country
The company's competitive advantage
Presence in different vendor list, product design indigenous knowledge, familiarity with the
technology and the resources required to implement the project in this field is among the most
important specific advantages. On this basis in the company's development according to long-
term goals has led to the resources required these goals; Before the start of projects, required
supply to accelerate the company's development activities, including human resources and
equipment needed these resources can be cited.
Page | 13
Having experienced team in the field of design, engineering and manufacturing of ball valves are
the most important advantage compared to other competitors have the ability to localize
knowledge completely.
Special equipment testing
In 2013, high-pressure testing machine with 145 thousand euros was purchased for testing of
high pressure products. this device is the list of required equipment available.
Page | 14
Special equipment for assembly and welding
Equipment for the assembling valves up to size 36 inches and corrosion resistant alloys Overlay
coverage exits in companies And it's one of the most important, ability to produce high weight
products.
workshop space
The total area of 5300 square meters of production units
The number of production units: 3 unit
Production area: 2600 square meters
Offices and service area: 1300 square meters
Open warehouse area: 1,000 sq. M.
Recommended