View
4
Download
0
Category
Preview:
Citation preview
Engineering of Lipid-Polymer Nanoarchitectural Platform for Highly
Effective Combination Therapy of Doxorubicin and Irinotecan
Thiruganesh Ramasamy a, Himabindu Ruttala b, Ju Yeon Choi a, Tuan Hiep Tran a, Jeong Hwan
Kim a, Sae Kwang Ku c, Han-Gon Choi d, Chul Soon Yong a,§, Jong Oh Kim a,§
a College of Pharmacy, Yeungnam University, 214-1, Dae-dong, Gyeongsan, 712-749, South
Koreab College of Pharmacy, Gachon University, 191 Hambakmoe-ro, Incheon, 406-799, South
Korea b College of Korean Medicine, Daegu Haany University, Gyeongsan, 712-715, South Koread College of Pharmacy, Institute of Pharmaceutical Science and Technology, Hanyang
University, 55, Hanyangdaehak-ro, Sangnok-gu, Ansan 426-791, South Korea
§Corresponding author: College of Pharmacy, Yeungnam University, 214-1 Dae-dong,
Gyeongsan 712-749, South Korea
E-mail: jongohkim@yu.ac.kr (Jong Oh Kim)
Tel: +82-53-810-2813, Fax: +82-53-810-4654
E-mail: csyong@ynu.ac.kr (Chul Soon Yong)
Tel: +82-53-810-2812, Fax: +82-53-810-4654
Electronic Supplementary Material (ESI) for ChemComm.This journal is © The Royal Society of Chemistry 2015
1. Materials and Methods
1.1. Materials
PEG-b-PAsp (MW 12000) was purchased from Alamanda Polymers, Inc. (Huntsville, AL, USA).
The block lengths were 113 and 50 repeating units for PEG and PAsp, respectively. DOX
(doxorubicin hydrochloride) was a gift from the Dong-A Pharmaceutical Company (Yongin,
South Korea). IRI (irinotecan hydrochloride) was a kind gift from Hanmi Pharmaceuticals, Co.
Ltd. (Hwaseong, South Korea). The SCC-7, MCF-7, HeLa, A-549, and MDA-MB-231 cell lines
were originally obtained from the Korean Cell Bank (Seoul, South Korea). All other chemicals
were of reagent grade and were used without further purification.
1.2. Preparation of Dual Drug-Loaded L-PCN
PCN/DI were formulated by a simple self-assembly process. Briefly, aqueous solutions of drugs
and PEG-b-PAsp copolymer were prepared and mixed at various molar ratios of drug to
copolymer, followed by incubation for 24 h at room temperature. Lecithin was then employed to
form vesicles around the PCN/DI. Lecithin was dissolved in chloroform and a micellar solution
of PCN/DI was added to this organic solution in a round-bottomed flask. The mixture was
shaken for 1 min to produce a milky dispersion, followed by immediate evaporation of organic
solvent in a rotary evaporator (40°C for 1 h). The final dispersion was probe-sonicated for 3 min
to form uniform L-PCN/DI. The L-PCN/DI was stored at 4°C until further analysis. Unbound
drugs were removed by ultrafiltration using Amicon YM-10 centrifugal filter devices (MWCO
10,000 Da, Millipore). The concentrations of DOX and IRI in the filtrates and in the
nanoparticles were determined by high-performance liquid chromatography (HPLC). The mobile
phase (water:acetonitrile:methanol, 50:25:25, pH 3.5) was run at 1 mL/min with a detection
absorbance of 254 nm.
1.3. Dynamic Light Scattering Analysis and Drug Loading
The Z-averaged hydrodynamic size (nm), polydispersity index (PDI), and ζ-potential (mV) of the
micelles were determined using dynamic light scattering (DLS) with a Zetasizer Nano ZS
(Malvern Instruments, Malvern, UK).
1.4. Physical Characterization
Fourier transform-infra red (FT-IR) spectra were recorded using a Thermo Scientific Nicolet
Nexus 670 FT-IR Spectrometer and Smart iTR, with a diamond window (Thermo Fisher
Scientific Inc., Waltham, MA). The sample crystallinity index was obtained by X-ray diffraction
(XRD) using an X’Pert PRO MPD diffractometer (Almelo, the Netherlands) with a copper anode
(Cu Kα radiation) as the source of radiation.
1.5. Morphological Analysis
The morphology of L-PCN/DI was examined by transmission electron microscope (TEM)
imaging (CM 200 UT, Philips, MA, USA) at an accelerating voltage of 100 kV. Briefly, the
nanoparticle dispersion was applied to a carbon-coated copper grid (300 mesh) and allowed to
adhere to the carbon substrate. A drop of 2% phosphotungstic acid solution was applied as a
negative stain, followed by air-drying or infrared radiation.
1.6. In Vitro Release Study
The release of DOX and IRI from L-PCN/DI was evaluated in phosphate-buffered saline (PBS,
pH 7.4, 0.14 M NaCl) and acetate-buffered saline (pH 5.0, 0.14 M NaCl) using a dialysis method
(Spectra/Por; 3,500 Da cutoff). At specific time intervals, the medium was completely
withdrawn and replaced with fresh medium to maintain sink conditions. The concentration of the
released drug was determined by HPLC, as described above.
1.7. In Vitro Cytotoxicity Studies
The in vitro cytotoxicity of the free drugs, PCN/DI, and L-PCN/DI was evaluated using an MTT
assay, as reported previously [13]. The cell lines (SCC-7, HeLa, MCF-7, A-549, and MDA-MB-
231) were seeded into 96-well microtiter plates at a density of 1 × 104 cells/well and allowed to
attach for 24 h. The cells were exposed to various concentrations of free drug or L-PCN/DI and
incubated for 24 h at 37°C. MTT (100 µL, 1.25 mg/mL in medium) was added to each well and
incubated for 3 h at 37°C in the dark before measuring the absorbance at 570 nm in a microplate
reader (Multiskan EX, Thermo Scientific, MA, USA). The concentrations causing half-maximal
(50%) toxicity (IC50) were calculated using GraphPad Prism software.
The combination index (CI) value based on the Chou and Talalay method was obtained
using CalcuSyn software (Biosoft, Cambridge, UK). The CI values were determined at the IC50
for all cell lines. The interaction between treatment modalities was calculated using the median-
effect equation and CI analysis. This analysis determined the synergistic, additive, and
antagonistic effects of the drug combination against SCC-7, HeLa, MCF-7, A-549, and MDA-
MB-231 cell lines. Values of CI > 1 represented antagonism, whereas CI < 1 represented
synergistic effects.
1.8. Cellular Uptake Study
The in vitro cellular uptake of L-PCN/DI into SCC-7 cell lines was studied using confocal laser
scanning microscopy (CLSM) (Nikon, Japan). The cells were seeded onto 12-well culture plates
at a density of 1 × 105 cells/well and incubated for 24 h. The cells were incubated with
Lysotracker Green (100 nM) for 10 min, followed by L-PCN/DI (with a total drug concentration
of 0.5 µg/mL) treatment for 10 min, followed by fixing with 4% paraformaldehyde for 10 min.
The cells were then observed by CLSM.
Cellular uptake efficiency was also evaluated in SCC-7, MCF-7, and MDA-MB-231 cell lines by
flow cytometry. Cells were seeded in 6-well plates at a density of 5 × 105 cells/well and
incubated for 24 h at 37°C. The cells were treated with a free drug cocktail or L-PCN/DI
(equivalent concentration of 20 µg/mL) for 30 or 60 min, respectively.
1.9. Apoptosis Assay and Cell-Cycle Analysis
SCC-7 cells (1 × 106 cells/well) were incubated overnight and treated with individual free drugs,
drug cocktail, or L-PCN/DI (0.5 and 1.0 µg/mL) for 24 h. The cells were trypsinized and
resuspended in PBS. The cells were stained using the annexinV/propodium iodide Apoptosis Kit,
according to the manufacturer’s instructions. The cells were then analyzed using the FACS
Calibur system with CellQuest software.
For cell cycle analysis, 1 × 106 cells/well were incubated overnight and treated with individual
free drugs, drug cocktail, or L-PCN/DI (0.5 and 1.0 µg/mL) for 6 or 24 h, respectively. Cells
were washed, collected, centrifuged, and fixed with 70% ice-cold ethanol for 30 min. Cells were
washed again and treated with Rnase A and propidium iodide (1 mg/mL) for 1 h in the dark. The
percentage of cells in each cycle phase was measured by the FACS Calibur system.
1.10. Pharmacokinetic Study
All animal care and experimental protocols were performed in accordance with the guidelines of
the Institutional Animal Ethical Committee, Yeungnam University, South Korea. The rats (~ 250
g) were cannulated to administer drug formulations and to withdraw blood samples.
Approximately 250 µL of blood was collected and immediately centrifuged (Eppendorf,
Hauppauge, NY, USA) at 13,000 rpm for 10 min. The plasma (150 µL) was mixed with
acetonitrile (150 µL) and vortexed for 30 min. This sample was centrifuged and the supernatant
layer was separated and vacuum evaporated (Modul 3180C, Buchon, South Korea) at 40°C. The
residue was reconstituted with mobile phase and injected into the HPLC column. Plasma DOX
and IRI were analyzed using a Hitachi HPLC system (Tokyo, Japan). Different mobile phases
were used for each drug; the mobile phase for DOX consisted of methanol:water:acetic acid
(50:49:1), pH 3; and the mobile phase for IRI consisted of water:acetonitrile:methanol
(65:17.5:17.5), pH 3.5. The UV absorption wavelength was 254 nm. The area under the plasma
concentration-time curve (AUC), Kel, and t1/2 were calculated using non-compartmental analysis
(Win-Nonlin; professional edition, version 2.1; Pharsight Co., MountainView, CA, USA). Levels
of statistical significance (p < 0.05) were assessed by analysis of variance (ANOVA).
1.11. In Vivo Antitumor Study
An SCC-7 tumor xenograft mouse model was prepared using 7-week-old female BALB/c nude
mice. The mice were divided into 6 groups, with 6 animals in each group. An SCC-7 cell
suspension (1 × 106 cells in 0.1 mL PBS) was subcutaneously injected into the right flank of each
mouse. The mice were then treated with the following formulations (i) untreated control, (ii) free
DOX, (iii) free IRI, (iv) free DOX/IRI cocktail, (v) PCN/DI, or (vi) L-PCN/DI at a dose of 5
mg/kg. The mice were injected (via the tail vein) with these formulations once every 3 days (day
1, 4, 7, 10) until the 4th injection. The tumor volume (V) was measured using the equation; V =
0.5 × longest diameter × shortest diameter2. The study was continued for up to 21 days, after
which mice were sacrificed according to the ethical guidelines.
1.12. Histopathological Analysis
Xenografted tumor masses were cut and fixed in 10% neutral buffered formalin, embedded in
paraffin, serially sectioned (3-4 μm), and stained with hematoxylin and eosin (H & E) prior to
examination of their histopathological profiles under a light microscope (Nikkon, Tokyo, Japan).
The tumor cell volumes and intact tumor cell-occupied regions (%/mm2 of tumor mass) were
calculated using a computer-based automated image analyzer (iSolution FL ver 9.1, IMT i-
solution Inc., Quebec, Canada).
1.13. Immunohistochemical Analysis
The apoptotic markers, caspase-3 and poly(ADP-ribose) polymerase (PARP), were investigated
immunohistochemically using purified primary antibodies and biotinylated secondary antibodies,
with avidin-biotin-peroxidase complex (ABC) and a peroxidase substrate kit (Vector Labs,
Burlingame, CA, USA). Briefly, endogenous peroxidase activity was blocked with methanol and
0.3% H2O2 for 30 min, and non-specific immunoglobulin binding was blocked with normal
horse serum blocking solution in 10 mM citrate buffer (pH 6.0). Tissue sections were incubated
with primary antisera overnight at 4ºC in a humidity chamber, and then incubated with
biotinylated universal secondary antibody and ABC reagents for 1 h at room temperature. Finally,
sections were reacted with the peroxidase substrate kit for 3 min at room temperature. Cells were
counted as immunopositive if they had > 20% immunoreactivity to the apoptotic marker
(caspase-3 or PARP). The percentage region occupied by caspase-3- and PARP-positive cells
within the tumor mass (%/mm2 of tumor mass) was measured by automated image analyzer.
1.14. Statistical Analysis
Multiple comparison tests were conducted to compare the dose groups. Variance homogeneity
was examined using the Levene test. If the Levene test indicated no significant deviations from
variance homogeneity, the obtained data were analyzed by one way ANOVA followed by a
least-significant differences (LSD) multi-comparison test to determine which pairs of groups
were significantly different. When the Levene test identified significant deviation from variance
homogeneity, a Kruskal-Wallis H non-parametric test was conducted. When a significant
difference was observed in the Kruskal-Wallis H test, the Mann-Whitney U (MW) test was
conducted to compare specific pairs of groups. Statistical analyses were conducted using SPSS
for Windows (Release 14.0K, SPSS Inc., USA). Differences were considered significant at p <
0.05.
Fig. S1. (A) Particle size and (B) ζ-potential after lecithin assembly on PCN/DI. (C) Entrapment efficiency and (D) loading efficiency of L-PCN/DI.
Fig. S2. (A) XRD patterns of (a) DOX, (b) IRI, (c) DOX/IRI cocktail, (D) physical mixture of drug/polymer, and (e) L-PCN/DI. (B) FT-IR spectrum of (a) PEG-b-PAsp, (b) DOX, (c) IRI, and (d) L-PCN/DI. (C) Effect of salt on L-PCN/DI and PCN/DI particle sizes.
Fig. S3. (A) In vitro cell viability of (A) A-549, (B) HeLa, (C) MCF-7, (D) SCC-7, (E) MDA-MB-231 cells, following treatment with single and combined free DOX and IRI, as indicated. (F) Combination index (CI) values in the indicated cell lines at DOX:IRI molar ratios of 1:1, 2:1, 5:1, 1:2, and 1:5. Data are presented as mean ± SD.
Fig. S4. In vitro cell viability of L-PCN/DI with various DOX:IRI molar ratios at a concentration of 1 µg/mL in A-549, HeLa, MCF-7, SCC-7, and MDA-MB-231 cells. Data are presented as mean ± SD.
Fig. S5. (A) Flow cytometry analysis of the cellular uptake efficiency of L-PCN/DI in SCC-7, MCF-7, and MDA-MB-231 cells. (B) Mean fluorescence intensity of DOX in the indicated cancer cell lines.
Fig. S6. In vitro cellular uptake in SCC-7 cells incubated with L-PCN/DI for 10 min or 60 min.
Fig. S7. DOX:IRI ratio in plasma after IV administration of a free DOX/IRI cocktail, PCN/DI, or L-PCN/DI to rats at a dose of 5 mg/kg. Each value represents the mean ± SD (n = 6). L-PCN/DI and PCN/DI had a DOX:IRI loading ratio of 1:1 and were prepared at pH 7.0.
Recommended