View
6
Download
0
Category
Preview:
Citation preview
1
edmonds.com.au
EcoPower® Data Catalogue
B0218 (rev.1) . May 2017
2 3
CONTENTS
TECHNICAL DATA: EP 400
Product dimensions & weight
Performance Data
Exploded views
Design Specification
TECHNICAL DATA: EP600
Product dimensions & weight
Performance Data
Exploded views
Design Specification
TECHNICAL DATA: EP900
Product dimensions & weight
Performance Data
Exploded views
Design Specification
4
5
6
7
8
9
10
11
12
13
14
15
HYBRID VENTILATION TECHNOLOGY
PRODUCT OVERVIEW
The EcoPower® incorporates Australian-engineered
hybrid patented ventilation technology. This design is an
innovative combination of natural ventilation and efficient
mechanical ventilation and operates in either natural
mode, power mode, or both modes simultaneously.
FEATURES & BENEFITS
• Low energy consumption of only 1.89x10-5 kW/(m3/hr) or
3.21x10-5 kW/CFM for EP900.
• Patented hybrid ventilator design that enables an open
throat to improve airflow performance.
• Reliable ventilation available when required through
power mode.
• Virtually inaudible from typical background sound
pressures of 55.9 dB(A) @1.5m for EP900, even in power
mode.
• No scheduled maintenance required for the life of the
product.
• Hybrid design eliminates potential air back-drafting.
• Can be utilised to drive an economiser system when
conditions permit.
• Lightweight aluminium construction for ease of
installation and minimal roof loading.
• Efficient EC motors directly connect to AC mains with
single phase power input.
• Large Input voltage range of 200-277 VAC and 50-60 Hz.
edmonds.com.auNote: • Image for illustrative purposes only. Image of EP900 shown.
HVAC Achiever award for EcoPower®
UL705 versions available on request
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
COMPANY MEMBER
National Export Awardfor Edmonds Business
CSR Building Products Ltd T/A CSR Edmonds certifies
that the EcoPower hybrid ventilators shown herein are
licensed to bear the AMCA Seal. The ratings shown are
based on tests and procedures performed in accordance
with AMCA Publication 211 and AMCA Publication 311
and comply with the requirements of AMCA Certified
Ratings Program.
4
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
PRODUCT DIMENSION & WEIGHT
Model EP400Turbine, Varipitch and Flashing
* Tolerance is within
+/- 5mm and +/- 0.5 kgs +/- 0.2 inches and +/- 1.1 Lbs
Speed of 360RPM shown is nominal. Performance is based on actual speed of test. Testing was conducted by AMCA. Performance certified is for installation type A: Free inlet, Free outlet. Rating method F (Direct Drive, As Run Speed, High Slip Motor). Performance ratings do not include the effects of appurtenances (accessories).
TECHNICAL DATA SHEET
OD ∅ 561 mm(22.1’)
585 mm(23.02’)
292 mm(11.48’)
ID ∅ 401 mm(15.79’)
750 x 700 mm(29.53’ x 27.56’)
Product information
Performance Data
EP400Static Pressure (Pa)
0Pa | 0.004 in.H20 14Pa | 0.056 in.H20 22Pa | 0.088 in.H20 27Pa | 0.108 in.H20
RPM 344 334 334 337
Flow Rate@ no wind
CFM 1 462 1 165 865 720
m3/hr 2 484 1 980 1 476 1 224
Power
BHP 0.076 0.079 0.076 0.075
Motor Input Watt
(kW)0.057 0.059 0.057 0.056
Sones 5.3 3.5 2.9 3.4
LwA (dB) 65 56 52 52
TECHNICAL DATA SHEET
PERFORMANCE DATA
Model EP400Tested Characteristic Curves : Static Pressure vs flow rate
EP400 Tested Sound Power Level : One - third octave
EP
40
0
Voltage [V] 200 - 277
Frequency [Hz] 50 - 60
Pmax [kW] 0.06
Imax [A] 0.55
Roof Opening Diameter (mm) 400
Roof Opening Diameter (‘) 5.75
Weight [kg] 9.42
Weight [lbs] 20.8
Max Amb. Temp [°C] 60
Max Amb. Temp (°F) 140
Performance ratings do not include the effects of appurtenances (accessories). Performance certified is for installation type A – Free inlet, Free outlet.Values shown are for inlet LWiA sound power levels for Installation Type A: free inlet, free outlet. The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. The sound ratings shown are loudness values in fan sones at 1.5 m (5 ft) in a hemispherical free field calculated per AMCA International Standard 301. Values shown are for Installation Type A: free inlet hemispherical sone levels.
Test at nominal value of 230V, 50Hz, and 360RPM
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
50 63 80 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000 6300 8000 10000
SoundPowerLevel(dB
)
Frequency(Hz)
0PaStaticPressure
14PaStaticPressure
22PaStaticPressure
27PaStaticPressure
Testing was conducted by AMCA. Performance certified is for installation type A - Free inlet, Free outlet. Rating method F (Direct Drive, As Run Speed, High Slip Motor). Values shown are for sound inlet LWi power levels for: Installation Type A: free inlet, free outlet. The sound power level ratings shown are in decibels, referred to 10-12 watts, calculated per AMCA International Standard 301. Performance ratings do not include the effects of appurtenances (accessories).
CSR Building Products Ltd T/A CSR Edmonds certifies that the EcoPower hybrid ventilators shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of AMCA Certified Ratings Program.
CSR Building Products Ltd T/A CSR Edmonds certifies that the EcoPower hybrid ventilators shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of AMCA Certified Ratings Program.
Stati
c Pr
essu
re
Flow Rate
60
50
40
30
20
10
0
(0.241)
(0.201)
(0.161)
(0.120)
(0.080)
(0.040)
(0)0 500 1000 1500 2000 2500
(0) (294) (589) (883) (1177) (1471)
(Pa)H2OCFM
(CFM)
(m3/hr)
Tested at motor input 230V, 50Hz, 60W, and 360RPM
6 7
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
EP
40
0
EXPLODED VIEW
DOME
TURBINE/IMPELLER
MOTOR
MOTOR SUPPORT ASSEMBLY & THROAT
VARIPITCH
FLASHING
EcoPower 400
DOME
TURBINE/IMPELLER
MOTOR
MOTOR SUPPORTASSEMBLY & THROAT
VARIPITCH
FLASHING
Model EP400
PERFORMANCERoof mounted ventilator shall be EP400. Ventilator air flow
performance shall be tested in accordance with ISO5801,
equivalent to ANSI / AMCA standard 210-07, figure 15
setup, installation type A. Fan sound performance shall be
tested and stated in accordance to AMCA standard 300-08,
figure 2 setup, installation type A. Noise must be less than
or equal to 64.8dB(A) @1.5m with max power consumption
at 60W or better.
OPEN THROATThe hybrid ventilator shall incorporate an open throat
design. This design improves air flow rates by eliminating
the need for a separate axial fan.
DRIVE ASSEMBLYThe ventilator shall use a direct drive centrifugal design
where the bearing system of the motor functions as the
bearing system of the ventilator. This means the vent can
be free spinning under wind load and/or power activated as
conditions require.
MOTORThe hybrid ventilator shall use a high efficiency single phase
Electronic Commutation (EC) motor.
TECHNICAL DATA SHEET
DESIGN SPECIFICATIONS
Model EP400
CONSTRUCTIONVentilator shall be constructed with high quality engineering
materials:
• Dome, turbine and throat shall be made of aluminium.
• The brackets shall be powder coated or polyolefin mild
steel.
• Support arms and motor housing shall be glass reinforced
Nylon 6.
• Available in a range of colours upon request.
ACCESSORIESWhen specified, accessories such as manual damper,
electric damper, EC damper grilles, and special bases
(spigot, square to round and ex base) are available upon
request.
WARRANTYCSR Building Products Limited ABN 55 008 631 356
T/A Edmonds (“Edmonds”) warrants from the date of
purchase, for a period of TWO (2) YEARS that the Electronic
Commutating Motor and for a period of TEN (10) YEARS
that the Turbine Body of the Edmonds EcoPower® Hybrid
Ventilator will retain its performance characteristics and
be free from faulty materials and workmanship on the
condition that the vent is installed in accordance to the
installation instructions. Please refer to Warranty Document
on edmonds.com.au for full details.
TECHNICAL DATA SHEET
8 9
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
EP600Static Pressure (Pa)
0Pa | 0.004 in.H20 8Pa | 0.032 in.H20 16Pa | 0.064 in.H20 23Pa | 0.092 in.H20
RPM 235 230 232 251
Flow Rate@ no wind
CFM 2 563 2 055 1 525 1 017
m3/hr 4356 3492 2592 1728
Power
BHP 0.130 0.133 0.130 0.121
Motor Input Watt
(kW)0.097 0.099 0.097 0.090
Sones 3.2 3.6 3.8 4.3
LwA (dB) 54 55 55 57
PRODUCT DIMENSION & WEIGHT
Model EP600Turbine, Varipitch and Flashing
TECHNICAL DATA SHEET
OD ∅ 764 mm(30.1’)
746 mm(29.4’)
378 mm(14.9’)
ID ∅ 593 mm(23.4’)
1000 x 1000 mm(39.4’ x 39.4’)
Product information
TECHNICAL DATA SHEET
PERFORMANCE DATA
EP
60
0
Voltage [V] 200 - 277
Frequency [Hz] 50 - 60
Pmax [kW] 0.099
Imax [A] 0.71
Roof Opening Diameter (mm) 600
Roof Opening Diameter (‘) 23.62
Weight [kg] 18.14
Weight [lbs] 40
Max Amb. Temp [°C] 50
Max Amb. Temp (°F) 122 * Tolerance is within
+/- 5mm and +/- 0.5 kgs +/- 0.2 inches and +/- 1.1 Lbs
Model EP600
EP600 Tested Sound Power Level : One - third octave
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
50 63 80 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000 6300 8000 10000
SoundPowerLevel(dB
)Frequency(Hz)
0PaStaticPressure
8PaStaticPressure
16PaStaticPressure
23PaStaticpressure
CSR Building Products Ltd T/A CSR Edmonds certifies that the EcoPower hybrid ventilators shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of AMCA Certified Ratings Program.
Performance ratings do not include the effects of appurtenances (accessories). Performance certified is for installation type A – Free inlet, Free outlet.Values shown are for inlet LWiA sound power levels for Installation Type A: free inlet, free outlet. The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. The sound ratings shown are loudness values in fan sones at 1.5 m (5 ft) in a hemispherical free field calculated per AMCA International Standard 301. Values shown are for Installation Type A: free inlet hemispherical sone levels.
CSR Building Products Ltd T/A CSR Edmonds certifies that the EcoPower hybrid ventilators shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of AMCA Certified Ratings Program.
Performance DataTest at nominal value of 230V, 50Hz, and 250RPM
Testing was conducted by AMCA. Performance certified is for installation type A - Free inlet, Free outlet. Rating method F (Direct Drive, As Run Speed, High Slip Motor). Values shown are for sound inlet LWi power levels for: Installation Type A: free inlet, free outlet. The sound power level ratings shown are in decibels, referred to 10-12 watts, calculated per AMCA International Standard 301. Performance ratings do not include the effects of appurtenances (accessories).
60
50
40
30
20
10
00 500 1000 1500 2000 2500 3000 3500 4000 4500 5000
(0.241)
(0.201)
(0.161)
(0.120)
(0.080)
(0.040)
(0)
H2OCFM (Pa)
Stati
c Pr
essu
re
Flow Rate(CFM)
(m3/hr)
(0) (294) (589) (883) (1177) (1471)
Speed of 250RPM shown is nominal. Performance is based on actual speed of test. Testing was conducted by AMCA. Performance certified is for installation type A: Free inlet, Free outlet. Rating method F (Direct Drive, As Run Speed, High Slip Motor). Performance ratings do not include the effects of appurtenances (accessories).
Tested Characteristic Curves : Static Pressure vs flow rateTested at motor input 230V, 99W, 50Hz, and 250RPM.
10 11
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
TECHNICAL DATA SHEET
EXPLODED VIEW
DOME
TURBINE/IMPELLER
MOTOR
MOTOR SUPPORT ASSEMBLY & THROAT
VARIPITCH
FLASHING
EcoPower 600
DOME
TURBINE/IMPELLER
MOTOR
MOTOR SUPPORTASSEMBLY & THROAT
VARIPITCH
FLASHING
Model EP600
TECHNICAL DATA SHEET
EP
60
0
DESIGN SPECIFICATIONS
Model EP600
PERFORMANCERoof mounted ventilator shall be EP600. Ventilator air flow
performance shall be tested in accordance with ISO5801,
equivalent to ANSI / AMCA standard 210-07, figure 15
setup, installation type A. Fan sound performance shall be
tested and stated in accordance to AMCA standard 300-08,
figure 2 setup, installation type A. Noise must be less than
or equal to 57.2dB(A) @1.5m with max power consumption
at 98.8W or better.
OPEN THROATThe hybrid ventilator shall incorporate an open throat
design. This design improves air flow rates by eliminating
the need for a separate axial fan.
DRIVE ASSEMBLYThe ventilator shall use a direct drive centrifugal design
where the bearing system of the motor functions as the
bearing system of the ventilator. This means the vent can
be free spinning under wind load and/or power activated as
conditions require.
MOTORThe hybrid ventilator shall use a high efficiency single phase
Electronic Commutation (EC) motor.
CONSTRUCTIONVentilator shall be constructed with high quality engineering
materials:
• Dome, turbine and throat shall be made of aluminium.
• The brackets shall be powder coated or polyolefin mild
steel.
• Support arms and motor housing shall be glass reinforced
Nylon 6.
• Available in a range of colours upon request.
ACCESSORIESWhen specified, accessories such as manual damper,
electric damper, EC damper grilles, and special bases
(spigot, square to round and ex base) are available upon
request.
WARRANTYCSR Building Products Limited ABN 55 008 631 356
T/A Edmonds (“Edmonds”) warrants from the date of
purchase, for a period of TWO (2) YEARS that the Electronic
Commutating Motor and for a period of TEN (10) YEARS
that the Turbine Body of the Edmonds EcoPower® Hybrid
Ventilator will retain its performance characteristics and
be free from faulty materials and workmanship on the
condition that the vent is installed in accordance to the
installation instructions. Please refer to Warranty Document
on edmonds.com.au for full details.
12 13
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
PRODUCT DIMENSION & WEIGHT
Model EP900Variable speed and fixed speed model available Turbine, Varipitch and Flashing
TECHNICAL DATA SHEET
OD ∅ 1093 mm(43’)
962 mm(37.9’)
442 mm(17.4’)
ID ∅ 888 mm(35.0’)
1200 x 1200 mm(47.2’ x 47.2’)
Product information
TECHNICAL DATA SHEET
PERFORMANCE DATA
EP
90
0
Voltage [V] 200 - 277
Frequency [Hz] 50 - 60
Pmax [kW] 0.22
Imax [A] 0.904
Roof Opening Diameter (mm) 900
Roof Opening Diameter (‘) 35.43
Weight [kg] 36
Weight [lbs] 79.4
Max Amb. Temp [°C] 60
Max Amb. Temp (°F) 140
EP900Static Pressure (Pa)
0Pa | 0.004 in.H20 14Pa | 0.056 in.H20 22Pa | 0.088 in.H20 27Pa | 0.108 in.H20
RPM 168 168 170 189
Flow Rate@ no wind
CFM 6 074 4 869 3 597 2 148
m3/hr 10321 8272 6112 3650
Power
BHP 0.271 0.284 0.278 0.231
Motor Input Watt
(kW)0.204 0.212 0.207 0.172
Sones 3.4 3.6 4.9 4.2
LwA (dB) 54 54 56 55
* Tolerance is within
+/- 5mm and +/- 0.5 kgs +/- 0.2 inches and +/- 1.1 Lbs
Model EP900
EP900 Tested Sound Power Level : One - third octave
0.0
10.0
20.0
30.0
40.0
50.0
60.0
70.0
50 63 80 100 125 160 200 250 315 400 500 630 800 1000 1250 1600 2000 2500 3150 4000 5000 6300 8000 10000
SoundPowerLevel(dB
)Frequency(Hz)
0PaStaticPressure
11PaStaticPressure
18PaStaticPressure
27PaStaticPressure
CSR Building Products Ltd T/A CSR Edmonds certifies that the EcoPower hybrid ventilators shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of AMCA Certified Ratings Program.
Performance ratings do not include the effects of appurtenances (accessories). Performance certified is for installation type A – Free inlet, Free outlet.Values shown are for inlet LWiA sound power levels for Installation Type A: free inlet, free outlet. The A-weighted sound ratings shown have been calculated per AMCA International Standard 301. The sound ratings shown are loudness values in fan sones at 1.5 m (5 ft) in a hemispherical free field calculated per AMCA International Standard 301. Values shown are for Installation Type A: free inlet hemispherical sone levels.
CSR Building Products Ltd T/A CSR Edmonds certifies that the EcoPower hybrid ventilators shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of AMCA Certified Ratings Program.
Testing was conducted by AMCA. Performance certified is for installation type A - Free inlet, Free outlet. Rating method F (Direct Drive, As Run Speed, High Slip Motor). Values shown are for sound inlet LWi power levels for: Installation Type A: free inlet, free outlet. The sound power level ratings shown are in decibels, referred to 10-12 watts, calculated per AMCA International Standard 301. Performance ratings do not include the effects of appurtenances (accessories).
Flow Rate
45
40
35
30
25
15
20
10
5
00 1000 2000 3000 4000 5000 6000 7000 8000 9000 1100010000
AMCA Flow Performance EP900 2V
AMCA Flow Performance EP900 6V
AMCA Flow Performance EP900 10V
H2OCFM (Pa)
Stati
c Pr
essu
re
(CFM)
(m3/hr)
(0.181)
(0.161)
(0.141)
(0.120)
(0.161)
(0.080)
(0.060)
(0.040)
(0.020)
(0)
(0) (589) (1177) (1766) (2354) (2943) (3531) (4120) (4709) (5297) (5886) (6474)
Performance DataTest at nominal value of 230V, 50Hz, and 180RPM with 10VDC control voltage
Speed shown is nominal. Performance is based on actual speed of test. Testing was conducted by AMCA. Performance certified is for installation type A: Free inlet, Free outlet. Rating method F (Direct Drive, As Run Speed, High Slip Motor). Performance ratings do not include the effects of appurtenances (ac-cessories).
Tested Characteristic Curves : Static Pressure vs flow rateTested at motor input 230V, 50Hz, 220W and 180RPM with 2VDC. Tested at motor input 230V, 50Hz, 220W and 180RPM with 6VDC. Tested at motor input 230V, 50Hz, 220W and 180RPM with 10VDC control voltage
14 15
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
Global-Mark.com.au®
Qua
lity M
anagement . ISO 9001
Quality Management standard for Edmonds Seven
Hills facility
National Export Awardfor Edmonds Business
COMPANY MEMBER
HVAC Achiever award for EcoPower® UL705 versions available
on request
TECHNICAL DATA SHEET
EXPLODED VIEW
Model EP900DOME
TURBINE/IMPELLER
MOTOR
MOTOR SUPPORT ASSEMBLY & THROAT
VARIPITCH
FLASHING
EcoPower 900
DOME
TURBINE/IMPELLER
MOTOR
MOTOR SUPPORTASSEMBLY & THROAT
VARIPITCH
FLASHING
PERFORMANCERoof mounted ventilator shall be EP900. Ventilator air flow
performance shall be tested in accordance with ISO5801,
equivalent to ANSI / AMCA standard 210-07, figure 15
setup, installation type A. Fan sound performance shall be
tested and stated in accordance to AMCA standard 300-08,
figure 2 setup, installation type A. Noise must be less than
or equal to 55.9dB(A) @1.5m with max power consumption
at 212W or better.
OPEN THROATThe hybrid ventilator shall incorporate an open throat
design. This design improves air flow rates by eliminating
the need for a separate axial fan.
DRIVE ASSEMBLYThe ventilator shall use a direct drive centrifugal design
where the bearing system of the motor functions as the
bearing system of the ventilator. This means the vent can
be free spinning under wind load and/or power activated as
conditions require.
MOTORThe hybrid ventilator shall use a high efficiency single phase
Electronic Commutation (EC) motor.
TECHNICAL DATA SHEET
EP
90
0
DESIGN SPECIFICATIONS
Model EP900
CONSTRUCTIONVentilator shall be constructed with high quality engineering
materials:
• Dome, turbine and throat shall be made of aluminium.
• The brackets shall be powder coated or polyolefin mild
steel.
• Support arms and motor housing shall be glass reinforced
Nylon 6.
• Available in a range of colours upon request.
ACCESSORIESWhen specified, accessories such as manual damper,
electric damper, EC damper grilles, and special bases
(spigot, square to round and ex base) are available upon
request.
WARRANTYCSR Building Products Limited ABN 55 008 631 356
T/A Edmonds (“Edmonds”) warrants from the date of
purchase, for a period of TWO (2) YEARS that the Electronic
Commutating Motor and for a period of TEN (10) YEARS
that the Turbine Body of the Edmonds EcoPower® Hybrid
Ventilator will retain its performance characteristics and
be free from faulty materials and workmanship on the
condition that the vent is installed in accordance to the
installation instructions. Please refer to Warranty Document
on edmonds.com.au for full details.
1300 858 674
www.edmonds.com.au
CSR Edmonds.
PO Box 231, Seven Hills, NSW 1730, Australia
Edmonds® and EcoPower® are registered trade marks of CSR Building Products Limited ABN 550 0863 1356.
The contents of this publication are the property of CSR Edmonds and may not be reproduced unless
written permission is granted. Specifications and data are subject to change without notice. Every
care has been taken to ensure the accuracy of the information contained within, but no liability will be
accepted for any loss or damage whether direct, indirect or consequential due to the use of information
contained herein.
Copyright 2017.
B0
218
(re
v.1)
. May
20
17
Established in 1934, Edmonds is a pioneer in home,
commercial and industrial ventilation solutions in
Australia as well as across the globe.
Edmonds is passionate about delivering superior comfort and
performance whilst reducing its impact on the environment. It is this vision
of a ‘sustainable future’ which has resulted in the design and development
of many energy efficient innovations. These include passive, wind-driven;
hybrid and turbine ventilation technology.
Regarded as a leading industry innovator, Edmonds ventilation products
are engineered and manufactured as its ISO9001 accredited facility in
Seven Hills, Australia. Edmonds was awarded the AIRAH Excellence in
Sustainability Award in 2013 and Achiever Award in 2008. It was also
recognised with a Good Design Award at the 2013 Australian International
Design Awards and Master Builders Australia 2012 National Export Award.
In 2016 Edmonds’ EcoPower Hybrid Ventilator won the MEP Services
Category in The Big 5 Gaia Awards.
With strong synergies between insulation and ventilation in the built
environment, Edmonds was acquired by CSR Building Products Limited
in 2005. Its vision remains to create Technologies for a Sustainable Future.
Recommended