View
783
Download
3
Category
Preview:
Citation preview
Russian Federation & Customs Union Technical Regulation Certification
TR / GOST R CertificationEAC Mark
Presented by Kyaw Soe Hein, B.Tech (Electronics), National University of Singapore
GOST Originally developed by Soviet Union as part of its
national standardization strategy. GOST is an acronym of
gosudarstvennyy standart (Russian: государственный стандарт)
Simply, it means “State Standard”.
Now, GOST becomes Regional Standards developed by EASC and GOST R is the national standard of Russian Federation.So, Guess you see the differentiation between GOST & GOST R.
Check the member states of EASC: http://www.easc.org.by/english/mgs_sostavsoveta_en.php
History
Introduced on January 1, 2010GOST R – becomes effective for also, Eurasian Customs Union (EACU) . 1. Russia2. Kazakhstan 3. BelarusIt works for two new states in CU as well Armenia and Kyrgyzstan
Important, GOST R Expired in March 2015 !
GOST R / TR Certification
This is the certification of conformity that required to clear goods through the customs while exporting to Russia and CU.
It is a approved document that concerned products are testifying to relevant Standards and safe to use (Generally) !
Technical Regulation (TR Certification will replace GOST R gradually)
The certification mark is replaced by EAC Mark !!15/03/2015 – Validity of ALL GOST R Certificates will expire.Validity of Certificates
TR Certification – 5 years validity
You want to sell products to Russia, you need this certificates depending on the types of your products !!
What is GOST R / TR Certificate?
Coming into force on February 15th, 2013:In align with unification of requirements for member countries of Customs Union, the new regulations will be on
Safety of machinery and equipment Safety of equipment used in the explosive
atmosphere Safety of devices working on gas fuel Safety of low voltage equipment EMC of technical devices Safety of lifts (from April 18th, 2013)
EAC Mark of Conformity
New Regulation !!
(TR CU Certificate of Conformity or EAC Certificate)
TR CU is valid up to 5 years for serial production.The Certificate of Conformity of the CU can only be issued by certification bodies – registered in the Unified Register of Certification Bodies and Testing Laboratories of The Customs Union.
EAC Mark of Conformity
TR CU Certification & Declaration of Conformity becomes a replacement of the GOST
Certification System
(TR CU Certificate of Conformity or EAC Certificate)Personally, I am not experienced in getting one ! My research is also limited due to lack of Russian Language. However, I asked general guideline from Someone Experienced- during dinner chit-chat session. Here it is the overview-
Test your products: Get HS Code from Russian Customs
Submit to Authorized agencies of Eurasian Economic
Commission or Authorized Certification bodies..
Getting EAC Mark of Conformity
EMCCE
Marking Standards
Safety CB Scheme
Product Manufacturer
ISO 9001 Accredited For more details, I
will try to present in next slides.
Let’s look at Low Voltage Regulation(TP TC 004/2011)
New Regulation for EAC
In Scope Out of ScopeDC Electrical Equipment (75-1500V)
Military Equipment
AC Electrical Equipment (50-1000V0
Medical Equipment
Ex Proof EquipmentComponents of Elevators & LiftsVehicle’s EquipmentEquipment of Nuclear Power Plants
EMC Regulation(TP TC 020/2011)“Applicable to any equipment (released in CU), which is able to create electromagnetic disturbances and if quality of equipment operation depends from external EM Disturbances influence.” (article 1)EMC concerned with both Emission & Immunity – that’s why you can follow CE Mark Reports for EMC portion !!
Out of Scope (EMC)• Passive Components and parts• Cables/Cords• Plugs/sockets• Passive TV/ Radio Antennas
It is clear to see which products are concerned with new regulations for EAC – LVE & EMC !!
New Regulation for EAC
Product - Product Name/Model#/Brand/Logo and EAC Mark- Manufacturer Name- Rating Label- Country of OriginPackage-Product Name/Model#/Brand/Logo and EAC Mark-Manufacturer Name
What’s the requirement ?
English Acceptable
English Acceptable
User Manual - Product Name/Model#/Brand/Logo and EAC Mark- Rating Label- Country of Origin-Actions when a failure is detected -Information on necessary actions for providing EMC- Rule of Safety Using- Necessary Installation and Adjustment Instructions- Manufacturer Name & Address- Date of manufacturing (mm/yyyy)- Information about safe storing, handling, using,
servicing and recyclingLanguage: Russian, Kazakh, Belarusian
What’s the requirement ?
It is mandatory to obtain LVE/EMC Certificates: Two Documents
DoC is only allowed for those products not included in new LVE & EMC directive.
Certificates to be Obtained
Certificate of Conformity
Declaration of Conformity
Up to 5 years Validity
Manufacturer Application Allowed
Up to 5 years ValidityLocal Holder Required
Typical WorkflowPreparation
• Check HS Code
• Check Procedure Type
• Check Applicable Standards
• Send Request
Application
• Application form
• Power of Attorney
• User Manual• Schematic Diagram
• Product Digital Photos
• CB Test Certificate & reports
• EMC Report• ISO 9001 certificate
• CIG023 Report (reference)
Certification
• Factory Inspection
• Check CoC Draft for
• Correct HS code
• Correct Model Name
• Correct Manufacturer & Factories Addresses
• Receive CoC• Apply EAC mark to your product
• Prepare correct package & User Manual
Thank you !!After receiving CoC, you may proceed to import into Eurasian Custom Union. “Good Business & Safe Products for People”
I hope you all get general overviews of EAC Mark & Application procedures in short time . I will be glad if it helps you even little bit.
Have a nice day !Kyaw Soe Heinhotep.soe@gmail.com (Singapore)
Recommended