View
2
Download
0
Category
Preview:
Citation preview
Instruction Sheet
Installation Procedure:
Figure 1Side view
Figure 2Complete assembly (breaker in Closed position)
Hazardous voltage.Will cause death, serious injury, or property damage.
Turn off power before working on this equipment.
MCC Handle Assembly E87010-A0246-T002-A5-MCC
for Sentron Series MD, ND, PD, and RD Circuit Breakers (800A – 2000A)
March, 2013
Siemens Industry, Inc. 5300 Triangle Parkway, Norcross, GA 30092 A5E32056810A
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES, THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF OR MODIFY ANY PRIOROR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP. THE SALES CONTRACT CONTAINS THEENTIRE OBLIGATION OF SIEMENS. THE WARRANTY CONTAINED IN THE CONTRACT BETWEEN THEPARTIES IS THE SOLE WARRANTY OF SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES OR MODIFY THE EXISTING WARRANTY.
©2013 Siemens Industry, Inc.All Rights Reserved Siemens is a registered trademark of Siemens AG. Product names mentioned may be trademarks or registered trademarks of their respective companies.
.eciton tuohtiw egnahc ot tcejbus era snoitacificepS
1. Install Breaker Cover Plate (item 1) to front of circuit breaker using two 10-32 screws and #10 lockwashers (items 2 and 3).
2. Place Locking Bracket (item 5) onto Handle Extension (item 6).
3. Start the ¼ -20 x 5/8 Screw (item 7) and ¼” Flat Washer (item 8) into the Locking Bracket so that a few threads engage.
4. Install the Handle Extension and Locking Bracket on the circuit breaker handle and tighten the ¼ -20 x 5/8 screws.
Refer to Figure 1 for a side view and to Figure 2 for the complete assembly (breaker in closed position).
For replacement parts information or an application guide, visit our website at www.usa.siemens.com/mcc or contact your local Siemens sales office.
1
Quantity
2
3
4
5
6
7
8
1
2
2
1
1
1
2
2
Breaker Cover Plate
#10-31 X 1.0 Screw
#10 Lockwasher
Gasket
Locking Bracket
Handle Extension
.25-20 X 5/8 TAPTITE Screw
1/4 Flat Washer 5/8 OD
Item Description
Circuit Breaker
Recommended