View
9
Download
0
Category
Preview:
Citation preview
Safety on the Inside.
Free Egress
Secured from the Outside.Controlled Access
Dual Force® 2190/2290 Series Interconnected Deadbolt/Deadlatch
Function Chart
The 2190/2290 Series Interconnected Deadbolt/Deadlatch provides access control and security for narrow stile aluminum (2190), hollow metal and wood (2290) doors. Deadlatch and deadbolt capabilities are combined for panic-proof exiting. The 2190/2290 combines the access control capabilities of a latch with the security of a deadbolt. With the deadbolt projected, a simple turn of the inside lever retracts both the latch and deadbolt simultaneously, providing code-compliant single-motion, panic-proof exiting. The Dual Force is available with electrified trim for easy integration into an existing access control system. Standard trim set, electrified trim set, low profile trim set designed for out-swinging doors only.
Store Door
Functions • Latchbolt operated by lever from either side• Deadbolt operated by key from either side
NOTE: Field configurable – must remove interconnect cam (consult with local AHJ for specific restrictions pertaining to this function).
Ordering• 2190/2290 with clutched or small format
trim set (alt. 4591 push/pull paddle set)• 2 each Mortise Cylinders
ANSI*/BHMA: F14
Storeroom Door
Functions • Latchbolt operated by lever from either side• Deadbolt operated by key from
outside and thumbturn from insideNOTE: Field configurable – must remove interconnect cam (consult with local AHJ for specific restrictions pertaining to this function).
Ordering• 2190/2290 with clutched or small format
trim set (alt. 4591 push/pull paddleset)• 4066 Mortise Thumbturn• Mortise Cylinders
ANSI*/BHMA: F21
Dormitory or Exit
Functions • Latchbolt operated by lever or
paddle from either side• Deadbolt projected by key from
outside and thumbturn from inside• Operating inside lever/paddle
retracts both bolts
Ordering• 2190/2290 with clutched or small format
trim set (alt. 4591 push/pull paddle set)• 4066 Mortise Thumbturn• 1 each Mortise Cylinder
ANSI*/BHMA: F13
Functions • Latchbolt operated by lever
from either side at all timesNOTE: Do not prepare door for cylinders
Ordering• 2190/2290 small format trim set
(alt. 4591 push/pull paddle set)• 4066 Mortise Thumbturn• Mortise Cylinder
ANSI*/BHMA: F01
Passage or Closet
* Closest ANSI/BHMA mortise lock function
Entry Lock
Functions • Latchbolt operated by lever or
paddle from either side• Rotating inside thumbturn or key from
outside extends deadbolt to locked position• Both deadbolt and latchbolt are retracted
by operating inside lever or paddle
Ordering• 2190/2290 with clutched or small format
trim set (alt. 4591 push/pull paddle set)• 4066 Mortise Thumbturn• Mortise Cylinders
ANSI*/BHMA: N/A
Closet/Storeroom Lock with Deadbolt
Functions • Latchbolt retracted by lever/
paddle from either side• Deadbolt operated by outside
key or inside lever
Ordering• 2190/2290 with clutched
or small format trim set (alt. 4591 push/pull paddle set)
• Mortise Cylinders
ANSI*/BHMA: N/A
Latch Holdback
Functions • Latchbolt operated by inside lever or paddle• Deadbolt/latchbolt operated by key
from either side• Retract latch via key and operate slide
button to engage holdback mechanism• Fixed pull on exterior• Inside lever/paddle always free
for immediate egress
Ordering• 2190/2290 small format trim (4600) from
inside only (alt. 4591 push paddle)• Mortise Cylinders• Fixed pull – supplied by door manufacturer
ANSI*/BHMA: N/A
Electrified Trim – with Mechanical Access Control Lockout
Functions • Outside lever unlocked by 12/24 VDC• Latchbolt (only) retracted by
outside lever when energized• Inside lever always free for
immediate egress• Deadbolt operated by key to provide
lockout function for access control
Ordering• 2190/2290 with electrified clutched trim set• 2 each Mortise Cylinders
ANSI*/BHMA: N/A
Exit Lock (Alternative)
Functions • Latchbolt operated by inside lever or paddle• Deadbolt/latchbolt operated
by key from either side• Inside lever/paddle is always
free for immediate egress
Ordering• 2190/2290 small format (4600) from
inside only (alt. 4591 push/pull paddle)• Mortise Cylinders
ANSI*/BHMA: N/A
Electrified Trim – No Access Control Lockout
Functions • Outside lever unlocked by 12/24 VDC• Latchbolt and deadbolt retracted by
outside lever when energized• Inside lever always free for
immediate egress• Deadbolt throws and retracts by key• Function for access control
NOTE: Field configurable – must install double interconnect cam (supplied) at installation
Ordering• 2190 with electrified clutched trim set• 2 each Mortise Cylinders
ANSI*/BHMA: N/A
Safety on the Inside.
Free Egress
Patent pending and/or patent www.assaabloydss.com/patents.
Copyright © 2019, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. # AR-046-0319
800.872.3267 | f: 800.232.7329 | adamsrite.com
10027 S. 51st St., Suite 102, Phoenix, AZ 85044
@AdamsRite AdamsRiteMfg Adams Rite
Options & AccessoriesThe 2190/2290 Series offers a combination of finish and handle options that will satisfy any design or function requirement. Designer handles are available in 11 different styles to blend with existing architecture or create a new design statement.
OPTION DESCRIPTION
Standard Series 01 Standard lever, curved
Standard Series 02 Standard lever, round
Standard Series 03 Standard lever, square
Aventura Series ME Studio Collection designer lever
Aventura Series MG Studio Collection designer lever
Aventura Series MI Studio Collection designer lever
Aventura Series MW Studio Collection designer lever
OPTION DESCRIPTION
Centro Series MD Studio Collection designer lever
Centro Series MJ Studio Collection designer lever
Odeon Series MN Studio Collection designer lever
Odeon Series MV Studio Collection designer lever
Recommended