View
215
Download
0
Category
Preview:
Citation preview
225MATERIAL HANDLING &
STORAGE
JANITORIAL & MAINTENANCE
SAFETY EQUIPMENT &
SUPPLIES
WELDING & METALWORKING
TOOLS & EQUIPMENT
SHIPPING & PACKAGING
INSTRUMENTS, SCALES &
ELECTRICAL
OFFICE PRODUCTS
R29
69
6E
DRUMS & DRUM EQUIPMENT
PROTECTIVE 55-GALLON DRUM LIDS• Tough average 40-mil thick LDPE lids protect steel
drum tops from corrosion and contamination• Available for open head and tight head drums• Available in clear to view labelling on drum top
SNAP-ON PAIL SAVER LID™• Snap-on lid is easily
applied for steel and plastic pails for in-plant use
Model No. DB019Price/Each $1.50
Model PriceNo. Description /Each
DA116 Open Head Drum, Black Lid 9.18DA117 Open Head Drum, Clear Lid 9.18DA118 Tight Head Drum, Black Lid 9.18DA119 Tight Head Drum, Clear Lid 9.18
ELASTICIZED DUST CAPS FOR 5, 30 & 55-GALLON CONTAINERS• Clear 4-mil LDPE caps with elasticized band for easy installation• Available in anti-static
Model No. Drum Size Price/Each
DC371 5 gal. 1.30DC375* 5 gal. 1.40DC372 30 gal. 1.70DC376* 30 gal. 1.70DC373 45 gal. 1.79DC377* 45 gal. 1.89
*Anti-static models
FUSIBLE LINK SELF-CLOSING DRUM COVERConvert open top 45 gallon steel drums into fi re-safe receptacles for combustible trash. A replaceable fusible link assembly inside the cover melts at 160°F, automatically slamming the cover shut if a fi re occurs in the drum. Steel construction; solvent resistant, red baked-on-enamel fi nish. Fits drums from 22 1/2" to 22 3/4" in diameter. FM approved. Wt. 16 lbs.
Model No. DA097 Price/Each $193.90 • Provides safe, secure and proper disposal of hazardous waste
• Control odour and vapours, minimise access to contents, and comply with your local fi re marshall
• Spring loaded, self-closing, vented opening closes after each use
• Manual latching drum cover is gasketed to seal the drum contents, designed to accept an optional padlock for maximum security
• Reduced VOC emissions keep you in compliance with EPA regulations
• Constructed of durable steel, lid is fi nished in chemically resistant red powder paint for extended service life
• Meets EPA 40 requirements• Approved by FM Global• Compliant to OSHA and NFPA 30 standardsModel No. DC284Price/Each $686.70
DRUM STORAGE RACKS• Ideal for high capacity horizontal storage of drums • 12 drum capacity with a total load rating of
12,000 lbs. per unit• Add-on unit locks into common upright on starter
allowing for higher capacity storage • Drums are supported full length by individual
12" W x 36" D drum cradles that allow for fork truck access • Unit can be used as standard selective pallet racking,
if cradles are removed • Starter unit dimensions: 36" D x 112" W x 96" H
Model Wt. PriceNo. Description lbs. /Each
DA541 Starter Unit 560 1243.14DA542* Add-On 505 1130.01
* Add-on unit includes one upright onlyF.O.B. Concord, Ontario.
DRUM STACKING RACK• Rack holds two or three 55-gallon drums• Can be stacked up to three high• Conveniently stacks drums horizontally
increasing space effi ciency• Forklift access from all four sides• Shipped knocked down
DC262
Model Drum Load O.A. Dimensions Wt. PriceNo. Cap. Cap. W" x D" x H" lbs. /Each
DC262 2 1600 45 1/2 x 30 x 12 1/2 48 175.00DC263 3 2400 71 1/2 x 30 x 12 1/2 75 260.00
VAPOUR TRAPTM DRUM COVER
Drumsnot included
For retailers, laboratories, industry, etc.
Vent
Spring Loaded Hinge
See pages 665 to 673
for Leather
Work Gloves.
0222-0250_En.indd 225 8/18/10 4:14:22 PM
Recommended