Double - Glass Vice

JV100 to be placed incentre of the joist

All joists @ 400mm crs

Screwing in CornersFix with 14 SS 14G x88mm hex headscrews

Screwing Nog to JoistRefer to diagram 3

Screwing Double BorderJoist to Joist/NogRefer to diagram 2

All nogs@400mmcrs

*All fasteners must be 316 stainless steel

Fix with 14 SS14g x 88mmHex Head Screws(Shown as dark)

J-Vice installmentin corner

Double boundaryjoist to nog/joist

Single joist to nog

Fix with 4 SS14g x 88mmHex Head Screws(Shown as dark)

Fix with 10 SS14g x 44mm

Hex Head Screws(Shown as light)

Fix with 14 SS14g x 44mmHex Head Screws(Shown as light)

Suits Joist Sizes

140 x 45mm190 x 45mm

240 x 45mm

290 x 45mm

This page applies to Glass Vice System - Top/ side fix Clearline balustrade system andSouthern Lites (Side Fix) Balustrade system

Note: boundaryjoist overlaparrangement

Typical Double Boundary Joist Timber Deck Construction DetailsAlternative solution to NZS 3604:2011 7.4.1.3

detailed to resist twisting of the boundary joist and joist hanger.Deck designer to ensure the structure can support the appropriate horizontal and vertical loads.

1

2

3

1

2 3

2

Double

All joists @ 400mm crs

Screwing in CornersFix with 14 SS 14G x125mm hex headscrews

Refer to diagram 2 forfixing detail for a triplejoist

JV100 to be placed incentre of the joist

Fix with 14 SS14g x 125mmHex Head Screws(Shown as dark)

Fix with 4 SS14g x 125mmHex Head Screws(Shown as dark)

Fix with 10 SS14g x 44mmHex Head Screws(Shown as light)

JV100 Triple joist corner detail

Triple boundary joist to nog/joist

Fix with 14 SS14g x 44mmHex Head Screws(Shown as light)

Single joist to nog/joist

Max

imum

spa

n of

120

0 to

pos

t cen

tres

All nogs@400mmcrs

This page applies to Glass Vice System - Top fix Barrier systems

Typical Triple Boundary Joist Timber Deck Construction DetailsAlternative solution to NZS 3604:2011 7.4.1.3

detailed to resist twisting of the boundary joist and joist hanger.Deck designer to ensure the structure can support the appropriate horizontal and vertical loads.

1

2

3

1

2 3

2

2

*All fasteners must be 316 stainless steel

Triple