Do Now: Take out your notebook and a pen. COPY FOR HOMEWORK: Define anchor point

Do Now: Take out your notebook and a pen.

COPY FOR HOMEWORK:1.Define anchor point2.Define line segment3.Explain the difference between an open and closed path.

Do Now: Take out your notebook and a pen.

COPY FOR HOMEWORK:1.Define anchor point2.Define line segment3.Explain the difference between an open and closed path.

Aim: What is a Bezier curve?

Pierre Bezier The anchor points can define a curve’s attributes. The curves are known as Bezier Curves. They are named

after the French mathematician Pierre Bezier, who developed a method for defining curves automatically.

Pierre Bezier The anchor points can define a curve’s attributes. The curves are known as Bezier Curves. They are named

after the French mathematician Pierre Bezier, who developed a method for defining curves automatically.

Anchor Point Types There are two types of anchor points:Smooth Points and Corner Points

Anchor Point Types There are two types of anchor points:Smooth Points and Corner Points

Control HandleControl Handle Tangent LinesTangent Lines

Each control handle extending from an anchor point controls only the portion of the curve of the line segment facing the control handle.

Each control handle extending from an anchor point controls only the portion of the curve of the line segment facing the control handle.

This control handlecontrols thisline segment

This control handlecontrols thisline segment

This control handlecontrols thisline segment

This control handlecontrols thisline segment

Convert Anchor Point Toolallows you to transform anchor points

and control the direction of tangent lines.

Convert Anchor Point Toolallows you to transform anchor points

and control the direction of tangent lines.

Short Cut – SHIFT CShort Cut – SHIFT C

Using the Convert Anchor Point tool you can change the direction of the curve by selecting

the control handle and moving it in any direction.

Using the Convert Anchor Point tool you can change the direction of the curve by selecting

the control handle and moving it in any direction.

While using the Convert Anchor Point tool you can eliminate the tangent lines completely by

simply clicking on the anchor point!

While using the Convert Anchor Point tool you can eliminate the tangent lines completely by

simply clicking on the anchor point!

Rules About Bezier Curves1. The length and angle of the handles “anticipate” the curves that follow.2. To ensure that the curve is smooth, place anchor points on either side of an arc, not in between.3. The fewer the anchor points, the smoother the curve will look and the faster it will print.4. Adjust a curve’s height and angle by dragging the direction points, or grab the curve itself to adjust the height.

Rules About Bezier Curves1. The length and angle of the handles “anticipate” the curves that follow.2. To ensure that the curve is smooth, place anchor points on either side of an arc, not in between.3. The fewer the anchor points, the smoother the curve will look and the faster it will print.4. Adjust a curve’s height and angle by dragging the direction points, or grab the curve itself to adjust the height.

Ways to Hinge Bezier CurvesAs You Draw

1. While you are click-dragging to draw a curve, press the Alt key to hinge the curve - pulling the

handle in a new direction.

Ways to Hinge Bezier CurvesAs You Draw

1. While you are click-dragging to draw a curve, press the Alt key to hinge the curve - pulling the

handle in a new direction.

Ways to Hinge Bezier CurvesAs You Draw

2. With the Pen tool, hold the Alt key and click-drag over the last drawn anchor point to hinge the

curve - pulling the handle in a new direction.

Ways to Hinge Bezier CurvesAs You Draw

2. With the Pen tool, hold the Alt key and click-drag over the last drawn anchor point to hinge the

curve - pulling the handle in a new direction.

A B

Pen Toolallows you to create anchor points

which define a path.

Pen Toolallows you to create anchor points

which define a path.

Short Cut - PShort Cut - P

Drawing a Closed PathDrawing a Closed Path

Class ExerciseClass Exercise

1. Open new Print Document - Letter Size - 8.5’ x 11’

2. Create 3 layers (Access layers panel with F7)

3. Access the Pen Tool and draw 3 open paths and 3 closed paths on each layer.

4. Make sure each Path has a different fill and different stroke.

5. Save as ‘name _ fill.ai’

Add Anchor Point Toolallows you to add anchor points

to a path.

Add Anchor Point Toolallows you to add anchor points

to a path.

Short Cut – +Short Cut – +

To add an anchor point simply click on the area of a line segment you wish.

To add an anchor point simply click on the area of a line segment you wish.

Delete Anchor Point Toolallows you to remove anchor points

from a path.

Delete Anchor Point Toolallows you to remove anchor points

from a path.

To remove an anchor point simply click on the anchor point you wish.To remove an anchor point simply click on the anchor point you wish.

Fill and StrokeFill is the color that goes inside the path

and the Stroke refers to the outline of the drawn object.

Fill and StrokeFill is the color that goes inside the path

and the Stroke refers to the outline of the drawn object.

Default Fill and Stroke - D

Swap Fill and Stroke - Shift X

None - /

Gradient - >

Color - <

Stroke - X

Fill (Click to activate) - X

Fill and Stroke - DetailedFill and Stroke - Detailed

Eyedropper Toolallows you to copy appearance

attributes from one object to another, including Stroke, Fill, Color, and Text

attributes.

Eyedropper Toolallows you to copy appearance

attributes from one object to another, including Stroke, Fill, Color, and Text

attributes.

Two-In-One Eyedropper Toolhas two modes:

the sampling Eyedropper andthe applying Eyedropper.

Two-In-One Eyedropper Toolhas two modes:

the sampling Eyedropper andthe applying Eyedropper.

Two-In-One Eyedropper Toolto copy attributes from one object to another, select the Eyedropper and position it over an unselected object.

The Eyedropper is sampling mode (angles down to the left). Click the object to pick up the attributes.

Now position the Eyedropper over the unselected object you wish to apply the attributes you just sampled, and

hold down the Option key. The Eyedropper will switch to applying mode (angles downward to the right and looks full). Click the object to apply the attributes.

Two-In-One Eyedropper Toolto copy attributes from one object to another, select the Eyedropper and position it over an unselected object.

The Eyedropper is sampling mode (angles down to the left). Click the object to pick up the attributes.

Now position the Eyedropper over the unselected object you wish to apply the attributes you just sampled, and

hold down the Option key. The Eyedropper will switch to applying mode (angles downward to the right and looks full). Click the object to apply the attributes.

Sampling from the Desktop

To sample attributes from the desktop, first select the objects you want to change. Then

select the Eyedropper tool, click anywhere on your document and hold the mouse button down while you move your cursor over the

desktop object you want to sample.

Sampling from the Desktop

To sample attributes from the desktop, first select the objects you want to change. Then

select the Eyedropper tool, click anywhere on your document and hold the mouse button down while you move your cursor over the

desktop object you want to sample.

Do Now: Take out your notebook and a pen. Please Log in and open a new file. Do Now: Take out your notebook and a pen. Please Log in and open a new file.

Aim: How do you create smooth curves vs. sharp curves?

Show Grid - Command “Show Grid - Command “

Try drawing the following images:Try drawing the following images:

Do Now: Take out your notebook and a pen. Please Log in and open a new file. Do Now: Take out your notebook and a pen. Please Log in and open a new file.

Aim: How can the pen tool be used to modify basic shapes?

Try drawing the following images:Try drawing the following images:

Do Now: Take out your notebook and a pen. Please Log in and open a new file. Do Now: Take out your notebook and a pen. Please Log in and open a new file.

Aim: How do you trace an image in Illustrator ?

Ms. EdelmanTechnology Wednesday 2.29.12

Choose the Type tool and type an uppercase Q. Change the font to

Wingdings. Open the Layers panel.

Choose the Type tool and type an uppercase Q. Change the font to

Wingdings. Open the Layers panel.

In the Layers panel, Lock the layer (A). Click the New Layer icon (B) on the panel. Double click on the layer and name it Path

(C).

In the Layers panel, Lock the layer (A). Click the New Layer icon (B) on the panel. Double click on the layer and name it Path

(C).

A

B

C