View
5
Download
1
Category
Preview:
Citation preview
Page 1
Service Information
www.andritz.com We accept the challenge!
coding / dateCopyright ANDRITZ AG 2010.All rights reserved
Disc Filter Improvement Survey
The challenge
Contact:ANDRITZ AG, Graz, AustriaPhone: +43 (316) 6902pulppaper-service@andritz.com
Dewatering and Thickening equipmentMachine groupDisc FilterMachineIndependentModel
Disc Filter Improvement Survey… improving the whole process throughout the determination of options to increase the capacity and/ or the filtrate quality
� Optimization of:- filter operation, - mechanical condition - maintenance handling
� Reduce operational problems such as - plugging of filter cloths- variations in consistency - filter vat level
� Investigate the possibility to use the filter in the other application or
- for the other pulp or - white water.
� Improve the internal water management- in paper machine approach systems - in stock preparation
In the course of time Disc Filter performance can fall off in quality. This decrease in productivity, filtrate quality or in the level of dryness can have several reasons such as a lack of maintenance, due to consumables and wear parts or incorrect adjustments. If problems appear, there is a tendency to try to solve the problem in a time consuming try and error process. An effective survey can easily show the source of the problem and save time.
Benefitsand features
Page 2
www.andritz.com We accept the challenge!
coding / dateCopyright ANDRITZ AG 2010.All rights reserved
� Stock furnish
� Pulp feed and distribution
� Even mat formation
� Proper mat knock off and discharge
� Vacuum system (drop leg size, pipe
rooting and water lock layout)
� Uniformity of dewatering across
machine
� Sufficient sector cleaning
� Accurate vacuum break point and
knock-off position
� Filtration capacity and mat dryness
under various operation conditions,
paper grades (saveall) or pulp
conditions (thickener)
� Cloudy, clear and superclear filtrate
quality (mg/l) under various operation
conditions
� Filter energy consumption
� Control system and interlocking review
� Leaf-test (optional)
Disc Filter Improvement Survey
The ANDRITZsolution
Performance Evaluation and Functional Inspectionduring operation
Page 3
www.andritz.com We accept the challenge!
coding / dateCopyright ANDRITZ AG 2010.All rights reserved
� Vacuum Valve
Dismantling of the vacuum valve,
inspection of the seal, wear plate and
bearing sleeve
� Knock-off spray pipe
Inspection of the nozzles and pipe
system
Check of knock-off position
Disc Filter Improvement Survey
The ANDRITZsolution
Mechanical Inspectionduring shut down
� Sectors
Inspection of sector fixing and seal to
the central shaft
Inspection of sectors and filter cloths
Inspection of straightness of discs
� Oscillating spray-pipe
Inspection of wearing and spare parts
Inspection and flushing of spray pipes
and nozzles
Check of spray pipe positioning
Drive Inspection
Page 4
www.andritz.com We accept the challenge!
coding / dateCopyright ANDRITZ AG 2010.All rights reserved
� Bearings
Opening and inspection of the seals,
bearing condition and lubrication
� Vat Seal
Inspection of the seal
� Support Rolls
Inspection of shaft support rolls,
support ring and graphite wear parts
(AD-filter)
� Gear boxes
Gear box inspection
� Screw
Inspection of V-belts
� Droplegs
Inspection of filtrate piping
Disc Filter Improvement Survey
The ANDRITZsolution
Mechanical Inspectionduring shut down
Recommended