View
288
Download
0
Category
Preview:
Citation preview
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 1
Made by DITEX TECHNOLOGIES S.R.L.
Copyrights reserved. This brochure can be neither partly nor totally copied, without the official written autorization of DITEX TECHNOLOGIES S.R.L. DITEX TECHNOLOGIES S.R.L. with holds the right to apply eventual modifications to the text of this document, without any previous advise.
This equipment can be used in completion of our test systems
COMMON-RAIL INJECTORS DISASSEMBLY/REASSEMBLY
RECONDITIONING/CALIBRATING
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 2
DISASSEMBLY/REASSEMBLY STANDARD EQUIPMENT COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7516
5
DX75165 Giuditta Press + Basis Kit
DX
7508
3
Clamping device to fix CR injectors on a conventional vice
during disassembly and reassembly
RECONDITIONING/CALIBRATING STANDARD EQUIPMENT COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7594
9
Mini drill set to clean and lap critical surfaces
DX
7562
0
Trickytec Calibration device to check lift
travel on multibrand injectors
+ Basis kit to fix different
Injector types
DX
7568
0 D
X75
681
DX75680 Microscope to inspect critical
surfaces after cleaning or lapping
+ DX75681
Microscope light
DX
7548
0 D
X75
470
DX75480 Ball seat reconditioner
+ DX75470
Kit for setting shims grinding
DX
7519
4
Kit for lapping tightening surface holder/nozzle on CR Injectors
DX
7539
1 D
X75
392
DX75391 Digital micrometer gauge
+ DX75392
Micrometer gauge holder
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 3
BOSCH CRI INJECTORS – 1 – 1MI – 1.2 – 2.1 – 2.2
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7523
8
Siemens plate and various applications plates
(Different thickness and diameter) for Guiditta Press
DX75165
DX
7321
1
Tool to remove injector valve bolt
DX
7535
2 D
X75
358
DX75352 Dynamometric wrench with
male connection 10/100 Nm
+ DX75358
½^ Ratchet connection with female connection
size 16mm
DX
7324
7
Valve extractor
DX
7535
7 D
X75
356
Open spanner with female connection
16mm
DX75357 size 29 DX75356 size 30
DX
7324
9
Sinterised gasket extractor
DX
7525
0 D
X75
351
DX
7534
6 D
X75
369
Closed spanner with female connection
16mm
DX75250 size 13 DX75351 size 15 DX75346 size 19 DX75369 size 22
DX
7322
9
Tool to insert sealing rings on
CR Injectors
DX
7536
0
Amagnetic tweezer
DX
7532
2 D
X75
344
DX75322 Octagonal Socket wrench to
disassembly Injector nut (273 Daily type)
+ DX75344
Octagonal Socket wrench to disassembly Injector nut
Ø 16
RECONDITIONING/CALIBRATING
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7324
3 D
X73
195
DX73243 Special Tool to fine grinding
internal surface on injector body +
DX73195
DX
7571
5 D
X75
394
DX
7321
8
DX75715 Dial Gauge Holder
+ DX75394
Digital Micro Dial Gauge 0.000
+ DX73218
Dial Gauge Holder to measure ball lift
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 4
BOSCH CRIN INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7523
8
Siemens plate and various applications plates
(Different thickness and diameter) for Guiditta Press
DX75165
DX
7321
1
Tool to remove injector valve bolt
DX
7535
2 D
X75
358
DX75352 Dynamometric wrench with male
connection 10/100 Nm
+ DX75358
½^ Ratchet connection with female connection
size 16mm
DX
7324
7
Valve extractor
DX
7535
7 D
X75
356
Open spanner with female connection
16mm
DX75357 size 29 DX75356 size 30
DX
7322
9
Tool to insert sealing rings on
CR Injectors
DX
7525
0 D
X75
351
DX
7534
6 D
X75
369
Closed spanner with female connection
16mm
DX75250 size 13 DX75351 size 15 DX75346 size 19 DX75369 size 22
DX
7532
5
Solenoid socket wrench for CRIN
DX
7536
0
Amagnetic tweezer
RECONDITIONING/CALIBRATING
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7324
3
DX73243 Special Tool to fine grinding
internal surface on injector body
DX
7539
4 D
X73
218
DX75394 Digital Micro
Dial Gauge 0.000 +
DX73218 Dial Gauge Holder to measure ball
lift
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 5
BOSCH CRIN2 CRIN3 INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7523
8
Siemens plate and various applications plates
(Different thickness and diameter) for Guiditta Press
DX75165
DX
7536
0
Amagnetic tweezer
DX
7535
2 D
X75
358
DX75352 Dynamometric wrench with male
connection 10/100 Nm
+ DX75358
½^ Ratchet connection with female connection
size 16mm
D
X75
095
Valve extractor CRIN2 CRIN3
DX
7535
7 D
X75
356
Open spanner with female connection
16mm
DX75357 size 29 DX75356 size 30
DX
7322
8
Tool to insert sealing rings on CR Injectors
CRIN2
DX
7535
1 D
X75
346
DX
7536
9
Closed spanner with female connection
16mm
DX75351 size 15 DX75346 size 19 DX75369 size 22
DX
7540
1 D
X75
402
Valve nut key CRIN2
DX75401 size 10 DX75402 size 12
DX
7549
9 D
X73
288
DX75499 Solenoid socket wrench
12 faces +
DX73288 Tool to insert sealing rings on
CR Injectors CRIN3
DX
7532
6
Solenoid socket wrench for CRIN2 CRIN3
RECONDITIONING/CALIBRATING
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7319
6
Special Tool to fine grinding internal surface on injector body
DX
7321
6 D
X75
394
DX73216 Dial Gauge Holder
+ DX75394
Digital Micro Dial Gauge 0.000
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 6
DELPHI INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7523
8
Siemens plate and various applications plates
(Different thickness and diameter) for Guiditta Press
DX75165
DX
7536
0
Amagnetic tweezer
DX
7535
2 D
X75
358
DX75352 Dynamometric wrench with male
connection 10/100 Nm
+ DX75358
½^ Ratchet connection with female connection
size 16mm
DX
7538
2
Anti-leakage liquid
DX
7535
1
Closed spanner with female connection
16mm
DX75351 size 15
RECONDITIONING/CALIBRATING
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7571
5 D
X75
394
DX75715 Dial Gauge Holder
+ DX75394
Digital Micro Dial Gauge 0.000
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 7
DENSO INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7521
5
Denso plate kit for Guiditta Press DX75165
DX
7536
0
Amagnetic tweezer
DX
7535
2 D
X75
358
DX75352 Dynamometric wrench with male
connection 10/100 Nm
+ DX75358
½^ Ratchet connection with female connection
size 16mm
D
X75
314
Tool to remove internal bolt
G2 - G3
DX
7535
4 D
X75
346
DX
7536
9
Closed spanner with female connection
16mm
DX75354 size 14 DX75346 size 19 DX75369 size 22
DX
7531
6
Disassembly tool for Denso injector nut
Ø 14
DX
7535
9
Open spanner with female connection
16mm
DX75359 size 27
DX
7530
2
Disassembly tool for Denso X2 type
RECONDITIONING/CALIBRATING
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7539
4
Digital Micro Dial Gauge 0.000
DX
7503
4
Tool to measure armature lift
on G2 (side) type
DX
7503
3
Tool to measure armature lift on G2 (side) type
DX
7503
2
Tool to measure armature lift on X2 type
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 8
CAT/PERKINS INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7522
8
Giuditta press plate Ø14
DX
7477
3
Caterpillar nut wrench
DX
7577
1
Solenoid tightening tool
D
X75
774
Inside nut tool kit
DX
7577
2
Disassembly wrench
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 9
SCANIA/CUMMINS XPI-ISX-QSK INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7508
6
Cummins Scania disassembly clamp tool
DX
7577
9
Cummins solenoid tightening wrench
DX
7577
5
Injector body assembly tool
DX
7578
7
Press tool Ø9,5
DX
7577
6
Centering tool
DX
7578
8
Nozzle nut adaptor
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 10
CUMMINS XPI-ISC-ISL INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7508
5
Cummins disassembly clamp tool
DX
7577
8
Centering tool
DX
7577
7
Injector body assembly tool
DX
7577
9
Cummins solenoid tightening wrench
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 11
CRIN 4.2 BOSCH (DOUBLE COIL) INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7506
5
Giuditta plate for Bosch Double Coil
Detroit Diesel/ Mercedes
DX
7535
6
Open spanner with female connection
Ø30
DX
7506
6
Nozzle nut wrench for Bosch Double Coil
Detroit Diesel/ Mercedes
DX
7537
3
Open spanner with female connection
Ø37
DX
7506
7
Body nut wrench for Bosch Double Coil
Detroit Diesel/ Mercedes
DX
7537
9
Dynamometric wrench with male connection
60-300 Nm
DX
7506
8
Solenoid wrench for Bosch Double Coil
Detroit Diesel/ Mercedes
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 12
BOSCH PIEZO INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7523
8
Siemens plate and various applications plates
(Different thickness and diameter) for Guiditta Press
DX75165
DX
7535
1 D
X75
369
Closed spanner with female connection
16mm
DX75351 size 15 DX75369 size 22
DX
7535
2 D
X75
358
DX75352 Dynamometric wrench with male
connection 10/100 Nm
+ DX75358
½^ Ratchet connection with female connection
size 16mm
DX
7534
4
Octagonal Socket wrench to disassembly Injector nut
Ø 16
DX
7538
3
Bosch Anti-leakage liquid
DX
7531
7
Disassembly tool for BH Piezo Injector nut
Ø 15
RECONDITIONING/CALIBRATING
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7546
0
Refilling/Calibrating Piezo Injectors Kit 5 PCS
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 13
VDO CONTINENTAL SIEMENS INJECTORS
DISASSEMBLY/REASSEMBLY
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7523
8
Siemens plate and various applications plates
(Different thickness and diameter) for Guiditta Press
DX75165
DX
7535
1
Closed spanner with female connection
16mm
DX75351 size 15
DX
7535
2 D
X75
353
DX
7535
8
Dynamometric wrench with male connection
DX75352 (10/100 Nm) DX75353 (2/25 Nm)
+ DX75358
½^ Ratchet connection with female connection
size 16mm
DX
7536
0
Amagnetic tweezer
DX
7537
1 D
X75
359
Open spanner with female connection
16mm
DX75371 size 25 DX75359 size 27
DX
7532
4
Siemens wrench (4 teeth)
RECONDITIONING/CALIBRATING
COD. ITEM DESCRIPTION COD. ITEM DESCRIPTION
DX
7503
5
Tool to calibrate exagonal shim on VDO II° generation
DISASSEMBLY/REASSEMBLY RECONDITIONING/CALIBRATING COMMON RAIL INJECTORS EQUIPMENT
Cap. 05
VRS. 1.2-28_11_16 www.ditex.it – info@ditex.it 14
37019 PESCHIERA DEL GARDA (VR) ITALY - LOC. MANDELLA - Tel. +390456401191 Fax +390457552215
Recommended