View
12
Download
0
Category
Preview:
Citation preview
DFB gauge information
Model name Distance between needles
(mm) Needle total width
(Inch) Needle total width
(mm) Max needle usage Thread tension
Number of equipped loopers
DFB1404P 8.5 (1/3”) 1 25.4 4 4X4 4
DFB1404P 6.4 (1/4”) 3/4 19.1 4 4X4 4
DFB1404P 9.5 (3/8”) 1+ 1/8 28.6 4 4X4 4
DFB1404P 10.6 (5/12”) 1+ 1/4 31.8 4 4X4 4
DFB1404P 12.7 (1/2”) 1+ 1/2 38.1 4 4X4 4
DFB1404P 6.4, 12.7, 6.4 (1/4”, 1/2”, 1/4”) 1 25.4 4 4X4 4
DFB1404P 6.4, 19.1, 6.4 (1/4”, 3/4”, 1/4”) 1+ 1/4 25.4 4 4X4 4
DFB1404PSF 6.4, 19.1, 6.4 (1/4”, 3/4”, 1/4”) 1+ 1/4 31.8 4 4X4 4
DFB1404PSF 4.76 19.1 4.76 (3/16”, 3/4”, 3/16”) 1 + 1/8 28.6 4 4X4 4
DFB1404PSF 4.76 25.4 4.76 (3/16”, 1”, 3/16”) 2 + 3/4 34.9 4 4X4 4
DFB1404PSF 6.4, 25.4, 6.4 (1/4”, 1”, 1/4”) 1+ 1/2 38.1 4 4X4 4
DFB1406P 4.76 (3/16”) 15/16 23.8 6 6X6 6
DFB1406P 6.4 (1/4”) 1+ 1/4 31.8 6 6X6 6
DFB1406P 8.5 (1/3”) 5/3 42.5 6 6X6 6
DFB1406P 9.5 (3/8”) 1 + 7/8 47.6 6 6X6 6
DFB1406PL 6.4 (1/4”) 1+ 1/4 31.8 6 6X6 6
DFB1406PL 8.5 (1/3”) 1/3 42.5 6 6X6 6
DFB1406PL 9.5 (3/8”) 1 + 7/8 47.6 6 6X6 6
DFB1408P 6.4(1/4”) 1 + 3/4 44.5 8 12X12 8
DFB1409P 6.4(1/4”) 2 50.8 9 12X12 9
DFB1411PSF ※1 1 + 1/2 38.1 4 4X4 4
DFB1411P-XP ※1 1 + 1/2 38.1 4 4X4 4
DFB1412P 6.4 (1/4”) 2 + 3/4 69.9 4 12X12 12
DFB1412P 5.0 55.0 12 12X12 12
DFB1412P 3.2 (1/8”) 1 + 3/8 34.9 12 12X12 12
DFB1412PL 6.4 (1/4”) 2 + 3/4 69.9 12 12X12 12
DFB1412PL 4.76 (3/16”) 33/16 52.4 12 12X12 12
DFB1418P ※1 2 + 1/2 63.5 6 - 6
DFB1421P 3.2 1/8 38.1 11 12X12 11
※ 1 Please refer to the pictures
※ For PMD / PE / PG models please refer to standard models
DFB1406PL 1/3”
Measurements are in mm
Needle bar center
DFB1406PL 1/4”
Needle bar center
Measurements are in mm
DFB1406PL 3/8”
Needle bar center
Needle bar center
Measurements are in mm
DFB1412PL 3/16”
Needle bar center
Measurements are in mm
DFB1411PSF
Needle hole position
1/8” X 5 _1/4”_1/4”_1/8” X 5
※Maximum needle usage is four
The black marks in the needle plate show factory needles set up
DFB1411PSF
The black marks in the needle plate show needles set up from the factory
Needle hole position
1/8” X 5 _1/4”_1/4”_1/8” X 5
※ Maximum needle usage is four ※ Additional presser foot is included
DFB1418P Needle hole position
1/8” X 4 _1/4”_1/8” X 3 _1/4”_
1/8” X 4_1/4”_1/8” X 3 ※ Maximum needle usage is six
※ The black marks in the needle plate show needles set up from the factory
Recommended