View
60
Download
2
Category
Tags:
Preview:
DESCRIPTION
DENON TU-604CI. 6 zone expandable multi tuner. DENON TU-604CI. Key Features 6 independent tuner possibility 2 build in FM/AM Tuners 4 Expansion slots for Additional FM/AM or DAB tuners Independent triggers + master trigger Web interface for setup and remote assistance - PowerPoint PPT Presentation
Citation preview
DENON TU-604CI
6 zone expandable multi tuner
• Key Features
– 6 independent tuner possibility– 2 build in FM/AM Tuners– 4 Expansion slots for Additional FM/AM or DAB tuners– Independent triggers + master trigger– Web interface for setup and remote assistance– Ip/RS232 control with easy to understand RS232
protocol
DENON TU-604CI
• Front panel
DENON TU-604CI
Power button + Indicator
Band mode button
Tuner Module on/offselection
Functionbuttons
RDSPTPTYbuttons
Setupbutton Jog dail/
Push to select
Return/Statusbutton
Memory button Mode
button
DisplayDimmer
DisplayWith remote sensor
Tuning buttons
Tuner on/off indicator
Shift button
Tuner select
• Back Panel
DENON TU-604CI
DAB/FM-AMTuner Expansion slots
Build inFM/AM tuner
Ethernet portRS232port
Remote bus in/out3.5mm jack
Master trigger
Tuner moduleindependent trigger 12v
Tuner moduleIndependent Stereo line out
• Tuner modulesFM/AM TUNER module
Specification;– Fm 87.5 – 108.00 MHz– AM 522 – 1611 KHz– Sensitivity FM 1.0 uV– Sensitivity AM 18uV– s/n Stereo 70dB – F-type antenna connector
DENON TU-604CI
Presets and line connectivity are on the TU-604 Ci for each module slot
DENON TU-604CI
• Tuner modules– DAB TUNER module
• Specification;– BandIII
174.928 – 239.200 MHz– Band L
1452.960 – 1490.624 MHz– Sensitivity band III -98dB– Sensitivity band L -94 dB– s/n Stereo 90dB– F-type Antenna connector
Presets and line connectivity are on the TU-604 Ci for each module slot
DENON TU-604CI• Tuner module installation
Power off the unitUn tighten the screws of the blind platesTake away the blind plates which cover the Tuner slots
• Tuner module installationDENON TU-604CI
Insert the tuner module into the SlotsYou can add DAB or FM/AM modules in any slotFit the screws back to secure the modules.The modules are direct recognized
• Web Interface
DENON TU-604CI
The Web interface can be accessed by entering the provided IP address of the router to the TU-604CIIn the Internet explorer
From here you have the abilityto select between;
- Unit control- Setup menu- Unit rename
Default is the name of the module Slot
• Unit Control
DENON TU-604CI
Use this page to control:-Power (ON/OFF)-Tuner (ON/OFF)-Tuner Band (FM/AM or DAB-Frequency-Memory Preset
Select tuner (module)Select preset and frequency
Display Select memory
Via select tuner you can select the module you want to control
• Setup Menu
DENON TU-604CI
Assign Preset banks to the Tuner modules
• Main Setup
DENON TU-604CI
Select Tuner module to prepare for control.
(FM/AM module or DAB)
Tuner 1 and 2 are FM/AM build in
• Setup Menu
DENON TU-604CI
Tuner Preset (A1 to G8) including:
- Memory Preset number- Radio Band (FM/AM)- Frequency
DENON TU-604CI
• Option Setup
Basic settings for the general control of the TU-604 CI:
- Dimmer Level (Bright/Dim/Dark/OFF)
- Remote ID (1/2/3/4) (set the remote code set for the module)
- Remote Lock (ON/OFF) (to avoid remote control)
- Setup Lock (ON/OFF) (lock the unit to avoid changes)
- RS-232 Power (ON/OFF) ( Enables rs232 control from standby mode)
- Firmware Update
DENON TU-604CI
Unit Rename
Use this page to change the name of Each tuner modules in the unit.
This is a useful tool to identify the tuner modules in a project
• Unit rename
DENON TU-604CI
• Save & Load
Save / Load
Use this pages to save your settings and to restore in case of accidental erasing.
You can also upload settings in another TU-604CI
Your projects are stored in your computer.
DENON TU-604CI6 zone expandable multi tuner
• RS232 controlStraight connection
Pin1: GND, Pin2: TxD, Pin3: RxD, Pin5: Common (GND)
Settings:Communication Speed : 9600bps
Character Length : 8 bitsParity Control : NoneStart Bit : 1 bitStop Bit : 1 bit
Example:STMS*ANFM<CR> : Select analog tuner FM bandTPS*ANUP<CR> : Select tuner preset one position upTMS*ANMANUAL<CR> : Tuning frequency manual mode.
The complete RS232 protocol files are downloadable on the Denon web site:TU-604CI http://www.usa.denon.com/TU604CI-IRCodes_V01.pdf
Recommended