View
2
Download
0
Category
Preview:
Citation preview
www.DoALLsaws.com - 1-888-362-5572
Job ProgrammingDCDS-600NC
www.DoALLsaws.com - 1-888-362-5572
A and A1 highlighted - Manual run screen
www.DoALLsaws.com - 1-888-362-5572
A and A2 highlighted - GTO indexer movement
RTO head swivel movement
www.DoALLsaws.com - 1-888-362-5572
GTO or manual movement of the indexer to a given point
www.DoALLsaws.com - 1-888-362-5572
RTO manual movement of the saw head
www.DoALLsaws.com - 1-888-362-5572
A and A3 highlighted - gives you manual hot keys for machine
movement during band change
www.DoALLsaws.com - 1-888-362-5572
A and A4 highlighted - SERVICE SCREENS (password protected)
www.DoALLsaws.com - 1-888-362-5572
Pick program from the list or create your own from a blank
www.DoALLsaws.com - 1-888-362-5572
Name program and save
www.DoALLsaws.com - 1-888-362-5572
B and B2 highlighted - allows you to pick by file name
www.DoALLsaws.com - 1-888-362-5572
B and B3 highlighted - allows you to pick or delete jobs
www.DoALLsaws.com - 1-888-362-5572
B and B3 highlighted - allows you to create a job run list
www.DoALLsaws.com - 1-888-362-5572
C and C1 highlighted - displays your program of choice
www.DoALLsaws.com - 1-888-362-5572
C and C2 highlighted - shows what the program is running
www.DoALLsaws.com - 1-888-362-5572
C and C3 highlighted - shows feed rate options
www.DoALLsaws.com - 1-888-362-5572
C and C4 highlighted - comments screen for the program:
feed rate, band speed, etc.
www.DoALLsaws.com - 1-888-362-5572
D and D1 highlighted - auto run screen
www.DoALLsaws.com - 1-888-362-5572
D and D2 highlighted - run list screen
www.DoALLsaws.com - 1-888-362-5572
D and D3 highlighted - run times etc.
www.DoALLsaws.com - 1-888-362-5572
B pick program
www.DoALLsaws.com - 1-888-362-5572
C and C1 highlighted - start filling out info
make sure to save after entering
www.DoALLsaws.com - 1-888-362-5572
www.DoALLsaws.com - 1-888-362-5572
C and C1 highlighted - enter all info
www.DoALLsaws.com - 1-888-362-5572
Fill in all fields and hit SYM or ASYM and your part will be drawn.
SYM equals common line parts while ASYM will crop cut each part.
www.DoALLsaws.com - 1-888-362-5572
www.DoALLsaws.com - 1-888-362-5572
SYM is single parts from a common line
www.DoALLsaws.com - 1-888-362-5572
CMU automatically back material up after cut before head is raised
- Remember to save your work
www.DoALLsaws.com - 1-888-362-5572
Hit OK and you are good to go
www.DoALLsaws.com - 1-888-362-5572
Copyright © DoAll Sawing Products. All Rights Reserved. No image(s) or part(s) from this site may be reproduced without the written permission of Continental
Machines, Inc. Options, specifications, prices and site content is subject to change without notice or obligation. Machine safety items may be omitted for
illustration purposes only -- For proper application, always read the operation manual.
Repair, replacement and service parts are available online at www.DoALLsaws.com/store. All quotes pricing includes standard electrical. For proper
application, always read the operation manual. Options, specifications and prices are subject to change without notice or obligation.
DoALL, StructurALL and SAM - The Sawing Answer Man are all registered trademarks of DoALL Company.
DoALL® Sawing Products is the original manufacturer
of metal cutting industrial band saws and continues to be
an industry leader after nearly 85 years.
Call 1-888-362-5572 or visit www.DoALLsaws.com.
Recommended