Date: Type: Firm Name: Project: ArchiPoint · Concealed Conduit Mounting Base 3/4 in NPT (U.S....

Date: _____________________________ Type: _________________________

Firm Name: ______________________________________________________

Project: _________________________________________________________

ArchiPoint iColor Powercore is a daylight-visible, exterior-rated LED point of light ideally suited for a range of direct-view and beacon applications, as well as for accent applications such as path and marker lighting. These versatile low-profile fixtures display large-scale video, graphics, and intricately designed effects in a host of settings, including architectural, retail, and entertainment installations. ArchiPoint iColor Powercore offers high-intensity output with the efficiency and cost-effectiveness of Powercore technology in a rugged, aluminum housing.

• Daylightvisible— Outputs up to 25,150 nits of intelligent color light in a weatherproof, low-profilehousing,perfectforlarge-scalevideo, dynamic effects, and other direct-view applications. Easily visible in brightly lit urban environments and daylight — even in direct sunlight.

• Directvieworillumination—Supportslarge-scale video for architectural, media façade, and advertising applications for viewing day or night. Indirect illumination delivers high levels of intensity for beacon, paths and marker lighting.

• Multiple mounting base options — Conduit Mounting Base offers side and back openings forflexibleconnectionsinsurface-mountedinstallations. Concealed Conduit Mounting Base hides all conduit and wiring behind the mounting surface for a clean look.

• Superiorcolorconsistencyandaccuracy—Optibin, an advanced binning algorithm, sets a new standard for the color consistency and uniformity of LED sources used in manufacturing.

• Flexibleinstallationoptions—Low-profilefixturesallowforinstallationinspacestootight for conventional spotlights. Multiple mountingbaseoptionsofferflexibilityinawide range of installation types and situations.

• IntegratesPowercoretechnology—Powercore delivers line voltage and data tofixturesoverasinglecable,dramaticallysimplifying installation and lowering total system cost. Philips Color Kinetics Data Enabler Pro merges line voltage and control dataanddeliversthemtothefixtureoverasingle cable, dramatically simplifying installation and lowering total system cost.

• Universalpowerinputrange—Acceptsauniversal power input range of 100 – 240 VAC for consistent installation anywhere in the world. Each Data Enabler Pro can support multiplefixturesforcreatinglongrunsofintricately changing color.

• Industry-leadingcontrols—Worksseamlessly with the complete Philips line of controllers,includingVideoSystemManagerPro,LightSystemManager,andiPlayer3,aswell as third-party controllers.

• Outdoorrated—FullysealedformaximumfixturelifeandIP66-ratedforoutdoorapplications.

Fordetailedproductinformation,pleaserefertoArchiPoint iColor Powercore Product Guide at www.philipscolorkinetics.com/ls/rgb/archipoint/

ArchiPointiColor Powercore Translucent Dome LensExterior daylight-visible LED point with intelligent color light

5.7 in(144 mm)

3.9 in(99 mm)

5.7 in(144 mm)

3.9 in(99 mm)

6.3 in(160.3 mm)

4.6 in(115.5 mm)

5.7 in(144 mm)

3.9 in(99 mm)

5.7 in(144 mm)

3.9 in(99 mm)

6.3 in(160.3 mm)

4.6 in(115.5 mm)

¾ NPT M25 x 5

¾ NPT M25 x 5

.2 in(Ø 5 mm)

3.65 in(92.7 mm)

1.2 in(29.5 mm)

3.22 in(82 mm)

6.44 in(164 mm)

4.2 in(106 mm)

3.2 in(82 mm)

4.2 in(106 mm)

4.2 in(106 mm)

4.2 in(106 mm)

3.2 in(82 mm)

6.44 in(164 mm)

3 in(76.2 mm)

6.44 in(164 mm)

¾ NPT M25 x 2

.2 in(Ø 5 mm)

3.2 in(82 mm)

4.2 in(106 mm)

4.2 in(106 mm)

.2 in(Ø 5 mm)

2.4 in(62 mm)

4 in(102 mm)

3.2 in(82 mm)

2.4 in(62 mm)

4 in(102 mm)

¾ NPT M25 x 5

¾ NPT M25 x 5

.2 in(Ø 5 mm)

3.65 in(92.7 mm)

1.2 in(29.5 mm)

3.22 in(82 mm)

6.44 in(164 mm)

4.2 in(106 mm)

3.2 in(82 mm)

4.2 in(106 mm)

4.2 in(106 mm)

4.2 in(106 mm)

3.2 in(82 mm)

6.44 in(164 mm)

3 in(76.2 mm)

6.44 in(164 mm)

¾ NPT M25 x 2

.2 in(Ø 5 mm)

3.2 in(82 mm)

4.2 in(106 mm)

4.2 in(106 mm)

.2 in(Ø 5 mm)

2.4 in(62 mm)

4 in(102 mm)

3.2 in(82 mm)

2.4 in(62 mm)

4 in(102 mm)

¾ NPT M25 x 5

¾ NPT M25 x 5

.2 in(Ø 5 mm)

3.65 in(92.7 mm)

1.2 in(29.5 mm)

3.22 in(82 mm)

6.44 in(164 mm)

4.2 in(106 mm)

3.2 in(82 mm)

4.2 in(106 mm)

4.2 in(106 mm)

4.2 in(106 mm)

3.2 in(82 mm)

6.44 in(164 mm)

3 in(76.2 mm)

6.44 in(164 mm)

¾ NPT M25 x 2

.2 in(Ø 5 mm)

3.2 in(82 mm)

4.2 in(106 mm)

4.2 in(106 mm)

.2 in(Ø 5 mm)

2.4 in(62 mm)

4 in(102 mm)

3.2 in(82 mm)

2.4 in(62 mm)

4 in(102 mm)

Conduit Mounting Base

Concealed Conduit Mounting Base

¾ NPT M25 x 5

¾ NPT M25 x 5

.2 in(Ø 5 mm)

3.65 in(92.7 mm)

1.2 in(29.5 mm)

3.22 in(82 mm)

6.44 in(164 mm)

4.2 in(106 mm)

3.2 in(82 mm)

4.2 in(106 mm)

4.2 in(106 mm)

4.2 in(106 mm)

3.2 in(82 mm)

6.44 in(164 mm)

3 in(76.2 mm)

6.44 in(164 mm)

¾ NPT M25 x 2

.2 in(Ø 5 mm)

3.2 in(82 mm)

4.2 in(106 mm)

4.2 in(106 mm)

.2 in(Ø 5 mm)

2.4 in(62 mm)

4 in(102 mm)

3.2 in(82 mm)

2.4 in(62 mm)

4 in(102 mm)

Philips Color Kinetics3 Burlington Woods DriveBurlington, Massachusetts 01803 USATel 888.385.5742Tel 617.423.9999Fax 617.423.9998www.philipscolorkinetics.com

Copyright © 2012 Philips Solid-State Lighting Solutions, Inc. All rights reserved. Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorBlaze, ColorBurst, ColorGraze, ColorPlay, ColorReach, iW Reach, eW Reach, eW Fuse, DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in the United States and / or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners. Due to continuous improvements and innovations, specifications may change without notice. DAS-000102-02 R00 07-12

SpecificationsDue to continuous improvements and innovations, specifications may change without notice

Photometrics

GlareShieldandDataEnablerPro

UseItemNumberwhenorderinginNorthAmerica.

Translucent dome lens

Cd: 0

18

37

55

73

92

110VA: 0º 10º 20º 30º 40º

90º

80º

70º

60º

50º

� - 0º H

Candela Table

0.0 22.5 45.0 67.5 90.0 0 103 103 103 103 103 5 102 102 102 102 102 15 100 100 100 100 100 25 95 95 95 95 95 35 88 88 88 88 88 45 80 80 80 80 80 55 71 71 71 71 71 65 62 62 62 62 62 75 52 52 52 52 52 85 42 42 42 42 42 90 37 37 37 37 37

Center Beam fc Beam Width

4.0 ft

8.0 ft

12.0 ft

16.0 ft

20.0 ft

24.0 ft

6 fc

2 fc

1 fc

.4 fc

.3 fc

.2 fc

31.2 ft

62.5 ft

93.7 ft

125.0 ft

156.2 ft

187.4 ft

31.3 ft

62.5 ft

93.8 ft

125.1 ft

156.4 ft

187.6 ft

�� Vert. Spread: 151.3º�� Horiz. Spread: 151.3º

Forluxmultiplyfcby10.7

Polar Candela Distribution

LED Lumens EfficacyRGB 501 17.6

Illuminance at Distance

*LumenmeasurementcomplieswithIESLM-79-08testingprocedures.† L70=70%lumenmaintenance(whenlightoutputdropsbelow70%ofinitialoutput).

L50=50%lumenmaintenance(whenlightoutputdropsbelow50%ofinitialoutput).Ambientluminairetemperaturesspecified.LumenmaintenancecalculationsarebasedonlifetimepredictiongraphssuppliedbyLEDsourcemanufacturers.Calculationsforwhite-lightLEDfixturesarebasedonmeasurementsthatcomplywithIESLM-80-08testingprocedures.Refertowww.philipscolorkinetics.com/support/appnotes/lm-80-08.pdfformoreinformation.

Item Specification Translucent Dome Lens

Output

Viewing Angle 150°

LuminanceinNits 10,877cd/m2

Lumens* 501

Lumen Maintenance† 70,000hoursL70 @ 25° C 40,000 hours L70 @ 50° C 100,000 hours L50@25°C 70,000hoursL50 @ 50° C

LED Channels Red / Green / Blue

Electrical

Input Voltage 100–240VAC,auto-switching,50/60Hz

Power Consumption 25Wmaximumatfulloutput,steadystate

PowerFactor .93@120VAC

Max.WiringVolume 22.0 cu in

Control

Interface DataEnablerPro(DMX/Ethernet)

ControlSystemPhilipsfullrangeofcontrollers,includingVideoSystemManagerPro,LightSystemManager,andiPlayer3,orthird-party controllers

Physical

FixtureDimensions (Height x Width x Depth)

5.7x6.4x6.4in(145x164x164mm)

Weight3.3lb(1.4kg)Domelensfixture 1.7lb(.78kg)ConduitMountingBase 2.2lb(.98kg)ConcealedConduitMountingBase

Housing Die-castaluminumwithsilvergraypowder-coatedfinish

Lens Translucent polycarbonate

FixtureConnections 7in(178mm)flyingleads

Temperature Ranges-40° – 122°F (-40° – 50°C)Operating -4° – 122°F (-20° – 50°C)Startup-40°–176°F(-40°–80°C)Storage

FixtureRunLengths

To calculate fixture run lengths and total power consumption for your specific installation, download the Configuration Calculator from www.philipscolorkinetics.com/support/install_tool/

Humidity 0–95%,non-condensing

Vibration Resistance ANSIC136.31

CertificationandSafety

Certification UL/cUL,FCCClassA,CE

Environment Dry/Damp/WetLocation,IP66

FixturesandMountingBases

UseItemNumberwhenorderinginNorthAmerica.

Item Type ItemNumber Philips12NC

ArchiPoint iColor Powercore 100 – 240 VAC

Translucent dome Lens 123-000022-00 910503702579

Clear flat lens 123-000022-01 910503702580

Conduit Mounting Base3/4inNPT (U.S.tradesizeconduit) 123-000152-00 910503702574

M25(metricsizeconduit) 123-000152-01 910503702575

Concealed Conduit Mounting Base

3/4inNPT (U.S.tradesizeconduit) 123-000152-02 910503702576

M25(metricsizeconduit) 123-000152-03 910503702577

Item Type ItemNumber Philips12NC

Glare Shield 120-000153-00 910503702674

Data Enabler Pro

3/4in/1/2inNPT (U.S.tradesizeconduit)

106-000004-00 910503701210

PG21/PG13 (metricsizeconduit)

106-000004-01 910503701211

10.1ft(3.1m)1 fc maximum distance