View
5
Download
0
Category
Preview:
DESCRIPTION
Dart Size
Citation preview
Part Number 01285900 Name Dart, top drill pipe MB 5.000 -5.875
Primary Legacy Number SDTM0505MB Version C.9
Secondary Legacy Number SDTM0505MB-NMV;WM0000557; 2081114706
Is Prime Not Set
Type Inseparable Source Make
Submitter Parra, Norman 2012-01-19 04:24:33
Checker Endenburg, Peter 2012-01-2706:44:08
Promoter Endenburg, Peter 2012-01-2706:46:20
Described By Document Number Version
C000100168 (Drawing) B.8C000100184 (Model) B.6
Reference Document Number Name
D000436608 Multifin Darts for LB, MB and DWP Systems
ECN That Caused This Version 150692 (UPDATE BOM - ER 3769 THROUGH 3774)
Classification Weatherford/Cementing/Cement wiper plugs/Drill pipe dart
Attribute Value Attribute Value
BODY DIAMETER 1.58 in COLOR yellow
FIN OUTSIDE DIAMETER 3.07 in FIN OUTSIDE DIAMETER 2 3.77 in
FIN OUTSIDE DIAMETER 3 5.34 in FIN OUTSIDE DIAMETER 4 4.72 in
FIN OUTSIDE DIAMETER 5 4.25 in FIN OUTSIDE DIAMETER 6 5.34 in
GENERIC DESCRIPTION Drill Pipe Dart LENGTH 11.89 in
LONG DESCRIPTION Min. Pump-through Drift Dia:2.54"/64.5mm
MAXIMUM TEMPERATURERATING
249.8 degF
MODEL DESIGNATION SSR MB / 837BC PDC DRILLABILITY PDC drillable
PIPE SIZE NOMINAL 5 PLUG CORE MATERIAL duromer
PLUG COVER MATERIAL polyurethane PLUG NOSE DIAMETER 2.492 in
PLUG NOSE TYPE latch-in PLUG TYPE SSR
SPECIAL REQUIREMENTS Wiping Range: 76.2mm/3.00" -131.1mm/5.16"
TYPE top
PDF Created:
2013-07-12 08:53:43 CDT
Weatherford 2013 All rights reservedThis document is copyrighted and whether containing patentable or non-patentable subject matter is and comprises the proprietary and confidentialinformation of Weatherford International Ltd. and by receiving this document therecipient agrees that this document is loaned in confidence with theunderstanding that neither it nor the information in it will be reproduced ordisclosed, in whole or in part for any purpose except the limited purpose for whichit is loaned. This document and any facsimiles hereof shall be returned toWeatherford International Ltd. upon demand.
PDM SYSTEM INFORMATION FOR PART 01285900Dart, top drill pipe MB 5.000 - 5.875
Prop
rieta
ry a
nd C
onfid
entia
l Cop
yrig
ht 2
013
Wea
ther
ford
All R
ight
s Re
serv
ed
Pa
ge 1
of 3
Part = 01285900 C.9
Part 01285900, C (Design) BOM List:
Line Number Number Name Quantity UOM ReferenceDesignator
1 01906002 Poly, dart 5.000 - 5.875 top PUR multi fins 1.0 each
2 00769941 O-ring -226 WE404 (FKM 75 standard) SAE AS568 1.0 each3 00734166 Ring, lock top dart MB aluminium 1.0 each
4 01287346 Nose, top drill pipe dart MB 1.0 each
5 00876819 Fin, front top dart SSR 1.0 each
PDF Created:
2013-07-12 08:53:43 CDT
Weatherford 2013 All rights reservedThis document is copyrighted and whether containing patentable or non-patentable subject matter is and comprises the proprietary and confidentialinformation of Weatherford International Ltd. and by receiving this document therecipient agrees that this document is loaned in confidence with theunderstanding that neither it nor the information in it will be reproduced ordisclosed, in whole or in part for any purpose except the limited purpose for whichit is loaned. This document and any facsimiles hereof shall be returned toWeatherford International Ltd. upon demand.
PDM SYSTEM INFORMATION FOR PART 01285900Dart, top drill pipe MB 5.000 - 5.875
Prop
rieta
ry a
nd C
onfid
entia
l Cop
yrig
ht 2
013
Wea
ther
ford
All R
ight
s Re
serv
ed
Pa
ge 2
of 3
Part = 01285900 C.9
W_A3
REV
C
40 1.5
7[
]
78 3.0
7[
]
63.3
0.1
2.49
20.
003
[]
59.2
0.1
2.33
10.
003
[]
2038.01[ ]
30211.9[ ]
95.8 3.77
[]
108 4.25
2[
]
119.
94.
72[
]
135.
65.
34[
]
135.
65.
339
[]
ITEM QTY DESCRIPTION MATERIAL DOC. NUMBER LEGACY P/N JDE P/N1 1 POLY, DART 5.000 - 5.875 TOP PUR MULTI FINS 03-0168-01 PU-SDT0505-B 19060022 1 O-RING -226 FKM 75D 007699413 1 RING, LOCK TOP DART MB 7075-T6/WN-432 03-0067-01 SIN-SRMB08 7341664 1 NOSE, TOP DRILL PIPE DART MB 7075-T6/WN-432 03-0072-12 SIN-SRMB17 12873465 1 FIN, FRONT TOP DART SSR 03-0099-00 DIN-SDT001 876819
DRAWING UNITS: mm [inch] ELASTOMERS (ALTERNATE)TOLERANCES
(DRIVEN BY METRIC SIZE)
mm inch UNLESS OTHERWISE STATED 1 SURFACE FINISH 3.2m Ra [125 i] 2 BREAK SHARP EDGES 0.50 [0.020]x45$ 3 ALL FILLET RADII 0.800 [0.031] 4 ALL ANGLES 45$ FROM HORIZONTAL 5 T.I.R. 0.25 [0.010]
X #2.0 [#0.08]X.X #1.0 [#0.04]X.XX #0.50 [#0.02]ANGLES X#0.5$ER No: 2378
SIZE [in]MIN. ID MAX. ID
mm mm[in] [in]
5.000 - 5.875 76.2 131.1[3.000] [5.160]
DRAWING VERSION
B.8 DRAWING FILE
C000100168 3RD ANGLE MODEL VERSION
B.6 MODEL FILE
C000100184
NAME
Dart, top drill pipe MB 5.000 - 5.875
Weatherford 2013 All rights reserved This document is copyrighted and whether containing patentable or non-patentable subject matter is and comprises the proprietary and confidential information of Weatherford International Ltd, and by receiving this document the recipient agrees that this document is loaned in confidence with the understanding that neither it nor the information in it will be reproduced or disclosed, in whole or in part for any purpose except the limited purpose for which it is loaned. This document and any facsimiles hereof shall be returned to Weatherford International Ltd upon demand. WEIGHT: 5.8
SCALE : 1:1[.1] SIZE : A3 SHEET : 1 OF 1
1 2 3 4 5
EPMDocument = C000100168 B.8
Prop
rieta
ry a
nd C
onfid
entia
l Cop
yrig
ht 2
013
Wea
ther
ford
All R
ight
s Re
serv
ed
Pa
ge 3
of 3
Part = 01285900 C.9
Recommended