View
248
Download
3
Category
Tags:
Preview:
Citation preview
Cutnell/JohnsonPhysics 7th edition
Classroom Response System Questions
Chapter 5 Dynamics of Uniform Circular Motion
Interactive Lecture Questions
5.1.1. An airplane flying at 115 m/s due east makes a gradual turn while maintaining its speed and follows a circular path to fly south. The turn takes 15 seconds to complete. What is the radius of the circular path?
a) 410 m
b) 830 m
c) 1100 m
d) 1600 m
e) 2200 m
5.1.1. An airplane flying at 115 m/s due east makes a gradual turn while maintaining its speed and follows a circular path to fly south. The turn takes 15 seconds to complete. What is the radius of the circular path?
a) 410 m
b) 830 m
c) 1100 m
d) 1600 m
e) 2200 m
5.2.1. A ball is whirled on the end of a string in a horizontal circle of radius R at constant speed v. By which one of the following means can the centripetal acceleration of the ball be increased by a factor of two?
a) Keep the radius fixed and increase the period by a factor of two.
b) Keep the radius fixed and decrease the period by a factor of two.
c) Keep the speed fixed and increase the radius by a factor of two.
d) Keep the speed fixed and decrease the radius by a factor of two.
e) Keep the radius fixed and increase the speed by a factor of two.
5.2.1. A ball is whirled on the end of a string in a horizontal circle of radius R at constant speed v. By which one of the following means can the centripetal acceleration of the ball be increased by a factor of two?
a) Keep the radius fixed and increase the period by a factor of two.
b) Keep the radius fixed and decrease the period by a factor of two.
c) Keep the speed fixed and increase the radius by a factor of two.
d) Keep the speed fixed and decrease the radius by a factor of two.
e) Keep the radius fixed and increase the speed by a factor of two.
5.2.2. A steel ball is whirled on the end of a chain in a horizontal circle of radius R with a constant period T. If the radius of the circle is then reduced to 0.75R, while the period remains T, what happens to the centripetal acceleration of the ball?
a) The centripetal acceleration increases to 1.33 times its initial value.
b) The centripetal acceleration increases to 1.78 times its initial value.
c) The centripetal acceleration decreases to 0.75 times its initial value.
d) The centripetal acceleration decreases to 0.56 times its initial value.
e) The centripetal acceleration does not change.
5.2.2. A steel ball is whirled on the end of a chain in a horizontal circle of radius R with a constant period T. If the radius of the circle is then reduced to 0.75R, while the period remains T, what happens to the centripetal acceleration of the ball?
a) The centripetal acceleration increases to 1.33 times its initial value.
b) The centripetal acceleration increases to 1.78 times its initial value.
c) The centripetal acceleration decreases to 0.75 times its initial value.
d) The centripetal acceleration decreases to 0.56 times its initial value.
e) The centripetal acceleration does not change.
5.2.3. While we are in this classroom, the Earth is orbiting the Sun in an orbit that is nearly circular with an average radius of 1.50 × 1011 m. Assuming that the Earth is in uniform circular motion, what is the centripetal acceleration of the Earth in its orbit around the Sun?
a) 5.9 × 103 m/s2
b) 1.9 × 105 m/s2
c) 3.2 × 107 m/s2
d) 7.0 × 102 m/s2
e) 9.8 m/s2
5.2.3. While we are in this classroom, the Earth is orbiting the Sun in an orbit that is nearly circular with an average radius of 1.50 × 1011 m. Assuming that the Earth is in uniform circular motion, what is the centripetal acceleration of the Earth in its orbit around the Sun?
a) 5.9 × 103 m/s2
b) 1.9 × 105 m/s2
c) 3.2 × 107 m/s2
d) 7.0 × 102 m/s2
e) 9.8 m/s2
5.3.1. A boy is whirling a stone at the end of a string around his head. The string makes one complete revolution every second, and the tension in the string is FT. The boy increases the speed of the stone, keeping the radius of the circle unchanged, so that the string makes two complete revolutions per second. What happens to the tension in the sting?
a) The tension increases to four times its original value.
b) The tension increases to twice its original value.
c) The tension is unchanged.
d) The tension is reduced to one half of its original value.
e) The tension is reduced to one fourth of its original value.
5.3.1. A boy is whirling a stone at the end of a string around his head. The string makes one complete revolution every second, and the tension in the string is FT. The boy increases the speed of the stone, keeping the radius of the circle unchanged, so that the string makes two complete revolutions per second. What happens to the tension in the sting?
a) The tension increases to four times its original value.
b) The tension increases to twice its original value.
c) The tension is unchanged.
d) The tension is reduced to one half of its original value.
e) The tension is reduced to one fourth of its original value.
5.3.2. An aluminum rod is designed to break when it is under a tension of 600 N. One end of the rod is connected to a motor and a 12-kg spherical object is attached to the other end. When the motor is turned on, the object moves in a horizontal circle with a radius of 6.0 m. If the speed of the motor is continuously increased, at what speed will the rod break? Ignore the mass of the rod for this calculation.
a) 11 m/s
b) 17 m/s
c) 34 m/s
d) 88 m/s
e) 3.0 × 102 m/s
5.3.2. An aluminum rod is designed to break when it is under a tension of 600 N. One end of the rod is connected to a motor and a 12-kg spherical object is attached to the other end. When the motor is turned on, the object moves in a horizontal circle with a radius of 6.0 m. If the speed of the motor is continuously increased, at what speed will the rod break? Ignore the mass of the rod for this calculation.
a) 11 m/s
b) 17 m/s
c) 34 m/s
d) 88 m/s
e) 3.0 × 102 m/s
5.3.3. A ball is attached to a string and whirled in a horizontal circle. The ball is moving in uniform circular motion when the string separates from the ball (the knot wasn’t very tight). Which one of the following statements best describes the subsequent motion of the ball?
a) The ball immediately flies in the direction radially outward from the center of the circular path the ball had been following.
b) The ball continues to follow the circular path for a short time, but then it gradually falls away.
c) The ball gradually curves away from the circular path it had been following.
d) The ball immediately follows a linear path away from, but not tangent to the circular path it had been following.
e) The ball immediately follows a line that is tangent to the circular path the ball had been following
5.3.3. A ball is attached to a string and whirled in a horizontal circle. The ball is moving in uniform circular motion when the string separates from the ball (the knot wasn’t very tight). Which one of the following statements best describes the subsequent motion of the ball?
a) The ball immediately flies in the direction radially outward from the center of the circular path the ball had been following.
b) The ball continues to follow the circular path for a short time, but then it gradually falls away.
c) The ball gradually curves away from the circular path it had been following.
d) The ball immediately follows a linear path away from, but not tangent to the circular path it had been following.
e) The ball immediately follows a line that is tangent to the circular path the ball had been following
5.3.4. A rancher puts a hay bail into the back of her SUV. Later, she drives around an unbanked curve with a radius of 48 m at a speed of 16 m/s. What is the minimum coefficient of static friction for the hay bail on the floor of the SUV so that the hay bail does not slide while on the curve?
a) This cannot be determined without knowing the mass of the hay bail.
b) 0.17
c) 0.33
d) 0.42
e) 0.54
5.3.4. A rancher puts a hay bail into the back of her SUV. Later, she drives around an unbanked curve with a radius of 48 m at a speed of 16 m/s. What is the minimum coefficient of static friction for the hay bail on the floor of the SUV so that the hay bail does not slide while on the curve?
a) This cannot be determined without knowing the mass of the hay bail.
b) 0.17
c) 0.33
d) 0.42
e) 0.54
5.4.1. The maximum speed at which a car can safely negotiate an unbanked curve depends on all of the following factors except
a) the coefficient of kinetic friction between the road and the tires.
b) the coefficient of static friction between the road and the tires.
c) the acceleration due to gravity.
d) the diameter of the curve.
e) the ratio of the static frictional force between the road and the tires and the normal force exerted on the car.
5.4.1. The maximum speed at which a car can safely negotiate an unbanked curve depends on all of the following factors except
a) the coefficient of kinetic friction between the road and the tires.
b) the coefficient of static friction between the road and the tires.
c) the acceleration due to gravity.
d) the diameter of the curve.
e) the ratio of the static frictional force between the road and the tires and the normal force exerted on the car.
5.4.2. A 1000-kg car travels along a straight portion of highway at a constant velocity of 10 m/s, due east. The car then encounters an unbanked curve of radius 50 m. The car follows the curve traveling at a constant speed of 10 m/s while the direction of the car changes from east to south. What is the magnitude of the acceleration of the car as it travels the unbanked curve?
a) zero m/s2
b) 2 m/s2
c) 5 m/s2
d) 10 m/s2
e) 20 m/s2
5.4.2. A 1000-kg car travels along a straight portion of highway at a constant velocity of 10 m/s, due east. The car then encounters an unbanked curve of radius 50 m. The car follows the curve traveling at a constant speed of 10 m/s while the direction of the car changes from east to south. What is the magnitude of the acceleration of the car as it travels the unbanked curve?
a) zero m/s2
b) 2 m/s2
c) 5 m/s2
d) 10 m/s2
e) 20 m/s2
5.4.3. You are riding in the forward passenger seat of a car as it travels along a straight portion of highway. The car continues traveling at a constant speed as it follows a sharp, unbanked curve to the left. You feel the door pushing on the right side of your body. Which of the following forces in the horizontal direction are acting on you?
a) a static frictional force between you and the seat
b) a normal force of the door
c) a force pushing you toward the door
d) answers a and b
e) answers a and c
5.4.3. You are riding in the forward passenger seat of a car as it travels along a straight portion of highway. The car continues traveling at a constant speed as it follows a sharp, unbanked curve to the left. You feel the door pushing on the right side of your body. Which of the following forces in the horizontal direction are acting on you?
a) a static frictional force between you and the seat
b) a normal force of the door
c) a force pushing you toward the door
d) answers a and b
e) answers a and c
5.4.4. A 1000-kg car travels along a straight portion of highway at a constant velocity of 10 m/s, due east. The car then encounters an unbanked curve of radius 50 m. The car follows the curve traveling at a constant speed of 10 m/s while the direction of the car changes from east to south. What is the magnitude of the frictional force between the tires and the road as the car negotiates the unbanked curve?
a) 500 N
b) 1000 N
c) 2000 N
d) 5000 N
e) 10 000 N
5.4.4. A 1000-kg car travels along a straight portion of highway at a constant velocity of 10 m/s, due east. The car then encounters an unbanked curve of radius 50 m. The car follows the curve traveling at a constant speed of 10 m/s while the direction of the car changes from east to south. What is the magnitude of the frictional force between the tires and the road as the car negotiates the unbanked curve?
a) 500 N
b) 1000 N
c) 2000 N
d) 5000 N
e) 10 000 N
5.5.1. A satellite is in a circular orbit around the Earth. If it is at an altitude equal to twice the radius of the Earth, 2RE, how does its speed v relate to the Earth's radius RE, and the magnitude g of the acceleration due to gravity on the Earth's surface?
a)
b)
c)
d)
e)
EgRv31
EgRv21
EgRv 2
EgRv21
EgRv31
5.5.1. A satellite is in a circular orbit around the Earth. If it is at an altitude equal to twice the radius of the Earth, 2RE, how does its speed v relate to the Earth's radius RE, and the magnitude g of the acceleration due to gravity on the Earth's surface?
a)
b)
c)
d)
e)
EgRv31
EgRv21
EgRv 2
EgRv21
EgRv31
5.5.2. It is the year 2094; and people are designing a new space station that will be placed in a circular orbit around the Sun. The orbital period of the station will be 6.0 years. Determine the ratio of the station’s orbital radius about the Sun to that of the Earth’s orbital radius about the Sun. Assume that the Earth’s obit about the Sun is circular.
a) 2.4
b) 3.3
c) 4.0
d) 5.2
e) 6.0
5.5.2. It is the year 2094; and people are designing a new space station that will be placed in a circular orbit around the Sun. The orbital period of the station will be 6.0 years. Determine the ratio of the station’s orbital radius about the Sun to that of the Earth’s orbital radius about the Sun. Assume that the Earth’s obit about the Sun is circular.
a) 2.4
b) 3.3
c) 4.0
d) 5.2
e) 6.0
5.5.3. A space probe is orbiting a planet on a circular orbit of radius R and a speed v. The acceleration of the probe is a. Suppose rockets on the probe are fired causing the probe to move to another circular orbit of radius 0.5R and speed 2v. What is the magnitude of the probe’s acceleration in the new orbit?
a) a/2
b) a
c) 2a
d) 4a
e) 8a
5.5.3. A space probe is orbiting a planet on a circular orbit of radius R and a speed v. The acceleration of the probe is a. Suppose rockets on the probe are fired causing the probe to move to another circular orbit of radius 0.5R and speed 2v. What is the magnitude of the probe’s acceleration in the new orbit?
a) a/2
b) a
c) 2a
d) 4a
e) 8a
5.6.1. A space station is designed in the shape of a large, hollow donut that is uniformly rotating. The outer radius of the station is 460 m. With what period must the station rotate so that a person sitting on the outer wall experiences “artificial gravity,” i.e. an acceleration of 9.8 m/s2?
a) 43 s
b) 76 s
c) 88 s
d) 110 s
e) 230 s
5.6.1. A space station is designed in the shape of a large, hollow donut that is uniformly rotating. The outer radius of the station is 460 m. With what period must the station rotate so that a person sitting on the outer wall experiences “artificial gravity,” i.e. an acceleration of 9.8 m/s2?
a) 43 s
b) 76 s
c) 88 s
d) 110 s
e) 230 s
5.7.1. At a circus, a clown on a motorcycle with a mass M travels along a horizontal track and enters a vertical circle of radius r. Which one of the following expressions determines the minimum speed that the motorcycle must have at the top of the track to remain in contact with the track?
a)
b)
c) v = gR
d) v = 2gR
e) v = MgR
grv 2
grv
5.7.1. At a circus, a clown on a motorcycle with a mass M travels along a horizontal track and enters a vertical circle of radius r. Which one of the following expressions determines the minimum speed that the motorcycle must have at the top of the track to remain in contact with the track?
a)
b)
c) v = gR
d) v = 2gR
e) v = MgR
grv 2
grv
5.7.2. A ball on the end of a rope is moving in a vertical circle near the surface of the earth. Point A is at the top of the circle; C is at the bottom. Points B and D are exactly halfway between A and C. Which one of the following statements concerning the tension in the rope is true?
a) The tension is smallest at point A.
b) The tension is smallest at point C.
c) The tension is smallest at both points B and D.
d) The tension is the same at points A and C.
e) The tension is the same at all four points.
5.7.2. A ball on the end of a rope is moving in a vertical circle near the surface of the earth. Point A is at the top of the circle; C is at the bottom. Points B and D are exactly halfway between A and C. Which one of the following statements concerning the tension in the rope is true?
a) The tension is smallest at point A.
b) The tension is smallest at point C.
c) The tension is smallest at both points B and D.
d) The tension is the same at points A and C.
e) The tension is the same at all four points.
5.7.3. An aluminum rod is designed to break when it is under a tension of 650 N. One end of the rod is connected to a motor and a 12-kg spherical object is attached to the other end. When the motor is turned on, the object moves in a vertical circle with a radius of 6.0 m. If the speed of the motor is continuously increased, what is the maximum speed the object can have at the bottom of the circle without breaking the rod? Ignore the mass of the rod for this calculation.
a) 4.0 m/s
b) 11 m/s
c) 16 m/s
d) 128 m/s
e) 266 m/s
5.7.3. An aluminum rod is designed to break when it is under a tension of 650 N. One end of the rod is connected to a motor and a 12-kg spherical object is attached to the other end. When the motor is turned on, the object moves in a vertical circle with a radius of 6.0 m. If the speed of the motor is continuously increased, what is the maximum speed the object can have at the bottom of the circle without breaking the rod? Ignore the mass of the rod for this calculation.
a) 4.0 m/s
b) 11 m/s
c) 16 m/s
d) 128 m/s
e) 266 m/s
5.7.4. A girl is swinging on a swing in the park. As she wings back and forth, she follows a path that is part of a vertical circle. Her speed is maximum at the lowest point on the circle and temporarily zero m/s at the two highest points of the motion as her direction changes. Which of the following forces act on the girl when she is at the lowest point on the circle?
a) the force of gravity, which is directed downward
b) the force which is directed radially outward from the center of the circle
c) the tension in the chains of the swing, which is directed upward
d) answers b and c only
e) answers a and c only
5.7.4. A girl is swinging on a swing in the park. As she wings back and forth, she follows a path that is part of a vertical circle. Her speed is maximum at the lowest point on the circle and temporarily zero m/s at the two highest points of the motion as her direction changes. Which of the following forces act on the girl when she is at the lowest point on the circle?
a) the force of gravity, which is directed downward
b) the force which is directed radially outward from the center of the circle
c) the tension in the chains of the swing, which is directed upward
d) answers b and c only
e) answers a and c only
Recommended