CSE 5392 Sensor Network Security

CSE 5392 By Dr. Donggang Liu 1

CSE 5392 Sensor Network Security

Introduction to Sensor Networks

CSE 5392 By Dr. Donggang Liu 2

An Application of Sensor Networks

sensor

Communication and processing

module

1. Network protocol (e.g., routing)2. Data management (e.g., aggregation)3. Localization and time synchronization4. Energy management, robustness, etc.

CSE 5392 By Dr. Donggang Liu 3

Sensor Node: Mica2

• Hardware– Processor: Atmega128L 4Mhz, 8-bit– Memory: 4K RAM, 512kB Flash– Communication: 19.2kbps Radio– Power supply: 2 AA Batteries

• Software – TinyOS / NesC Applications– Network management– Power management– Sensor drivers– Security package (TinySec)

CSE 5392 By Dr. Donggang Liu 4

Sensing Capabilities

• Many types of sensors that are able to monitor:– Temperature– Humidity– Light– Pressure– Noise levels– The presence or absence of certain kinds of objects– Movement (speed, direction) of an object

CSE 5392 By Dr. Donggang Liu 5

Military Applications

• Battlefield surveillance

• Monitoring friendly forces, equipment and ammunition

• Reconnaissance of opposing forces and terrain

• Target tracking

• Battle damage assessment

• Nuclear, biological and chemical attack detection and reconnaissance

CSE 5392 By Dr. Donggang Liu 6

Civilian Applications

• Forest fire detection

• Biocomplexity mapping of the environment

• Flood detection

• Precision Agriculture: the pesticides level in the drinking water, soil erosion, and air pollution.

• Smart environment, smart kindergarten, and more

CSE 5392 By Dr. Donggang Liu 7

Features of Sensor Networks

• Fault tolerance

• Scalability

• Production costs

• Hardware constraints

• Sensor network topology

• Transmission media

• Power consumption

CSE 5392 By Dr. Donggang Liu 8

Fault Tolerance

• Failures due to:– lack of power– physical damage in harsh environment– Interference by other objects (e.g. radios) and other

sensors.

• Fault tolerance: the ability to maintain sensor network functionalities in the presence of failures

• The environment is important to the fault tolerance of algorithms and protocols

CSE 5392 By Dr. Donggang Liu 9

Scalability

• Number of sensors: hundreds, thousands, to millions, depending on the applications.

• The density of the network usually depends on the applications

• Typically, people consider a large number of sensor nodes densely deployed in a target field.

CSE 5392 By Dr. Donggang Liu 10

Costs

• Per node cost is important for large sensor networks. It has to be kept low.

• Bluetooth radio system: $5 now, but still too expensive for sensors. PicoNode: targeted to be < 50c.

• More challenging, with large amount of functionalities

• Reality: $150 for one Micaz mote

CSE 5392 By Dr. Donggang Liu 11

Resource Constraints (Mica2)

• Processor: 8-bit 4MHz CPU (no division)

• Limited memory: 4K RAM

• Low bandwidth: 19.2K bps

• Small packet size: 29-byte long payload

• Limited energy supply: Battery powered

• Many traditional techniques are not practical

CSE 5392 By Dr. Donggang Liu 12

Network Topology

• Sensor networks are usually formed in an ad hoc manner• Topology maintenance is a challenging task due to

– Number of nodes, failures, dynamics etc• Pre-deployment and deployment phase

– Reduce the installation cost,– Eliminate the need for any pre-organization and pre-planning– Increase the flexibility of arrangement– Provide better self-organization and fault tolerance.

• Post-deployment phase– Topology may changes are due to node movement, lack of energy,

node malfunctioning, etc• Re-deployment of additional nodes phase

– Adding new sensors

CSE 5392 By Dr. Donggang Liu 13

Transmission media

• Wireless communication– Radio – Infrared – Optical media

• Multi-hop communication– Short distance wireless links

• Unreliable– Low bandwidth, low power

CSE 5392 By Dr. Donggang Liu 14

Power consumption

• The lifetime of a node strongly depends on the battery lifetime

• Sensing, communication, and data processing.– Sensing power: depends on applications– Communication: expensive

• Involves both data transmission and reception

• The active power + the start-up power consumption

– Data processing: not expensive• In-network processing is crucial to minimize power

consumption in a multi-hop sensor network.

CSE 5392 By Dr. Donggang Liu 15

Communication Architecture

CSE 5392 By Dr. Donggang Liu 16

Protocol Stack

CSE 5392 By Dr. Donggang Liu 17

Physical Layer

• Wireless radio signals– Frequency selection– Frequency generation– Signal detection – Modulation.

• Examples:– CC1000 chipset in Mica2

CSE 5392 By Dr. Donggang Liu 18

Data Link Layer

• Media access control– Provide fair and efficient access to the channel– It provide point-to-point link– Example: CC1000RadioIntM.nc

• Error Control– Simple error correction scheme– CRC check– Example: RadioCRCPacket.nc

• Energy aware

CSE 5392 By Dr. Donggang Liu 19

Network Layer

• Routing (infrastructureless network)– Ad hoc routing techniques (e.g., DSR) do not fit

• Power efficiency

• Data centric routing

• Data aggregation

• Example:– Flooding: each node receiving a packet repeats it by

broadcasting (simple flooding versus TTL-based)– Geographic forwarding: forward packets to the nodes close

to the destination node

• Energy aware

CSE 5392 By Dr. Donggang Liu 20

Transport Layer

• An open research issue

• This layer is especially needed when the system is planned to be accessed through Internet or other external networks.

CSE 5392 By Dr. Donggang Liu 21

Application Layer

• An open research issue

• Depends on applications:– Makes the hardware and software of the lower

layers transparent to the applications

CSE 5392 By Dr. Donggang Liu 22

A Simple Protocol Stack

CC1000RadioIntM.nc CC1000ControlM.nc

A simple send/receive application

send receive control

CSE 5392 By Dr. Donggang Liu 23

Active Research Area

• Routing

• Topology management

• Data management

• MAC protocols

• Target tracking, service discovery

• Monitoring and maintenance

• Security and privacy