View
8
Download
0
Category
Preview:
Citation preview
Head OfficeJl. Hayam Wuruk No. 4 E-G-IJakarta 10120Tel. +62 21 386 6228Fax. +62 21 345 6879
FactoryJl. Industri Keroncong No.95Jati Uwung - Tangerang 15134Tel. +62 21 5930 8891 - 93Fax. +62 21 590 1457 - 58
email : pm@pm-electric.comwebsite : www.pm-electric.com
Company Profile
Introduction
David So, SKomFinance & GA Director
Ferri Limputra, BEng MBAManaging Director
Ir. Djury SantosaTechnical & Production Director
Pura Mayungan (PM) is one of the leading integrated solu�on provider in Medium Voltage (MV) and Low Voltage (LV) electrical power distribu�on. We are a proudly Indonesian-owned company who designs, manufactures, markets, and distributes MV & LV switchboards and switchboard components. PM is also a sole authorized partner of various prominent overseas manufacturers of switchboards and components. PM also has a business unit which provides energy efficiency consultancy and solu�ons for implementa�on of ISO 50001:2011 EnMS.
Based in Jakarta, PM was founded in 1975 as a joint efforts between founders IR Suryono Limputra and the late Mr Surianata Suhada. Mr Suryono Limputra has earlier in 1968 founded PT Pura Jaya as a switchboard manufacturer and Mr Surianata Suhada has earlier also founded Mayungan Jaya as an electrical components shop at Pasar Kenari. These merging of words Pura and Mayungan was created with the idea of a pura (a temple) which provides cover and serve like an umbrella (‘payung’), a safe haven for all his stakeholders – his customers, his suppliers and principal partners, his employees, and his shareholders.
PM as a company and all the 350 employees take great pride in contribu�ng to the development of quality and efficient electrical infrastructure in Indonesia and aspire to be a regional SE Asia player in the future. We are serving and building las�ng rela�onship with more than 1000 na�onal and mul�na�onal companies which include PLN, End Users, ME Contractors, switchboard manufacturers, distributors and electrical shops from Sabang to Merauke. PM also works together closely with Consultants, principals, and suppliers to provide great service. PM strives to provide quality products and solu�ons, excellent services, and great customer experience.
01
Introduction 1
Vision, Mission and Values 2
Our Certificates 3
Resources 5
Photovoltaic (Solar Cell) 6
Busduct System 7
Switchboards 8
Solutions for Utility (PLN) 10
Solutions for Industries 14
Solutions for Commercial Building 18
Switchboard Components 22
Energy Efficiency Solution 23
CONTENT
VISION
MISSION
VALUES
Focus on Customers
earningL
ttitudeA
olution orientedS
armonyH
As a valued partner to PLN we complies to their high standard by having SPM for production of LV
switchboards and LV Components.
02. Vision, Mission and Values 03. Our Certificates
ManagementSystem
OHSAS18001:2007
ISO 50001:2011
www.tuv.comID 9105071257
Komite Akreditasi NasionalLembaga Sertifikat Sistem Mutu
LSM-012-IDN009
Focus on Customers
• We understand that sa�sfi ed customers who trust us will be partners
who ensure long term sustainability of our company. Therefore, we
passionately focus on mee�ng the needs and requirements of our
customers
Learning
• We con�nuously strive for Excellence by learning and improving
ourselves to be�er serve our partner customers and stakeholders
Attitude
• We have caring, fair, and trustworthy a�tudes toward our customers,
our suppliers, and each other
Solution oriented
• We always strive to fi nd the best win-win and value-adding solu�on
Harmony
• We work in harmony as one big family with each other, our partner
customers, and with nature
BS OHSAS 18001:2007 ISO 50001:2011 ISO 9001:2008
LMK PHBTR LMK APP TIDAK LANGSUNG LMK APP LANGSUNG
1. Extensive Production and QC Resources
Production & Engineering Resources
► 20,000 m2 of land, ca. 10,000 m2 of produc�on space
► Fully Automated Busbar Cu�ng & Bending Machine
► Powder Coa�ng Oven Pain�ng Facili�es
► Amada CNC Punching Machine
► Amada CNC Bending Machine
► CAD & CAM Systems
► Plasma Cu�ng Machine
► Robo�c Welding Amada
Quality Control
► Insula�on Resistance Tester
► Voltage Injec�on 2.5 KV for Low Voltage
► Over 100 employees of UB Switchboard
► Strong Engineering & Design Team
► Skilled Produc�on Teams
► Customer Service Oriented Marke�ng &
Sales Team
► Responsive Technical Support Team
2. Competent Human Resources
► Switchboard System Simula�on
04. Resources 05. Resources
Quality Control
Production
Engineering
and 50 KV for Medium Voltage
Plasma Machine - ACTECHWelding Robotics - Panasonic TA 1400 Punching Machine - AMADA
06. Photovoltaic 07. Busduct System
Solar CellOur Renewable Energy Solution
1. Unique Structure Design The unique serrated surface design of the housing greatly improves the heat dissipation for the whole busway
system. The design also provides IP 66 rating.
2. Superior & Reliable Insulation - Standart configuration or High-end Feature
- Booth Class B (130°C ) PET and epoxy insulation class F (150°C) are available.
3. Unique Installation Protection Device A Unique installation protection device is designed to prevent potential damage to the busbar in the event of
incorrect conection. With this unique device,the installer cannot connect two section of busway successfully with the incorrect phase orientation.
Copper busway (50Hz, temperature = 20°C)
Aluminum busway (50Hz, temperature = 20°C)
Resistance ( Copper conductor )
Resistance ( Aluminum conductor ) 50% internal ground
NO. -6Rated Current ( A ) Resistance ( 10 Ω/m )
NO. -6Rated Current ( A ) Resistance ( 10 Ω/m ) NO. -6Rated Current ( A ) Resistance ( 10 Ω/m )
NO. -6Rated Current ( A ) Resistance ( 10 Ω/m )
CurrentResistance
( mΩ )Reactance
( mΩ )Impedance
( mΩ )
CurrentResistance
( mΩ )Reactance
( mΩ )Impedance
( mΩ )
Voltage drop per mete ( V )
Power factor cosφ
Voltage drop per mete ( V )
Power factor cosφ
50% internal ground 50% internal ground and 50% housing as ground
50% internal ground and 50% housing as ground
0.086 0.082 0.086 0.089 0.0810.077
The PowerHub busway system housing is manufactured from high quality magnesium aluminum alloy, which complies with the criteria recommended by IEC and IEEE standards for use as the ground for the busway system. The busway is also equiped with a heat dissipa�on structure, which makes the ground or earth capacity more than 50% of
Resistance Reactance Honeywell PowerHub busway has low voltage-values. Minimum reactance (x) is due to very close bar spacings (sandwiched construc�on) and a non-magne�c housing. Values shown are iden�cal for plug-in and feeder.
Prisma iPM
Kit solution for tested and IEC 61439-1 and 61439-2
compliant low voltage electrical distribution switchboard
(certified by CCC and ASEFA Laboratories)
Prisma iPM system L
Solution for wall-mounted enclosures for electrical
switchboard up to 630A, Icw 25 kA rms/1s
Prisma iPM system M
Solution for floor standing cubicles for electrical
switchboards up to 4000A, Icw 100kA rms/1s
Technical Data:
Metal enclosures: steel metal sheet with electrophoresis
treatment + hot-polymerised polyester epoxy powder
Color RAL 7047 (enclosure) and RAL 9002 (functional unit)
Degree of protection IP 30 to IP 54 Degree of protection
against mechanical impact IK07 to IK10
Dimension Prisma iPM system L
Height: 300 mm, 500 mm, 700 mm, 900 mm, 1100
mm, 1300 mm, 1650 mm, 1850 mm
Width: 300 mm, 600 mm
Dimension Prisma iPM system M
Height: 2000 mm
Width: 300 mm, 400 mm, 600 mm, 800 mm
Depth: 400 mm, 600 mm, 800 mm , 1000 mm
Depth: 235 mm, 305 mm
PMSafe
08. Switchboard 09. Switchboard
Wall mounted switchboards up to 630A
Prisma iPM system L
Floor standing switchboards up to 4000A
Prisma iPM system M
Technical Data
Rated voltage
Rated insula�on voltage
Withstand voltage (50 Hz)
Impulse withstand voltage
Rated frequency
oRated normal current (40 C)
Rated short-�me withstand current (3 s)
Overall dimensions
Weight
Degree of protec�on
Compa�ble circuit-breakers and contactors
[kV]
[kV]
[kV]
[kV]
[Hz]
[A]
[kA]
H (mm)
W (mm)
D (mm)
[Kg]
24
24
50
125
50-60
630
1250
1600
2000
2500
25
1680
750/1000
1030
320
IP 3X
HD4, VD4
· Mechanical and electromechanical safety locks to prevent incorrect operations
· Metal l ic shutters with fai l safe device (prevention of manual opening)
· Circuit-breaker/contactor racking in/out with door closed
· Gas insulated circuit-breakers and vacuum circuit-breakers and contactors can be installed
· Earthing switch fitted with interlocks with the circuit-breaker
With ABB Powercube
10. Solution for Utility (PLN) 11.Solution for Utility (PLN)
APP AMR BOXSupplied to
I. PT.PLN (Persero) Distribusi
Jawa Barat & Banten
Area Bandung
Area Bekasi
Area Gunung Putri
Area Banten Utara
Area Majalaya
II. PT. PLN (Persero) Distribusi
Jakarta & Tangerang
Area Teluk Naga
Area Serpong
III. PLN Pusharlis UWS II
Bandung
Compact Substation 2 Floor
PM UB Switchboard has supplied and will continue to work together with PLN - Generation, Transmission, and Distribution to fi nd quality and efficient switchboard solutions.
We started to supply PLN with quality solutions since 2007. We also contribute in discussion duringdevelopment of new standard of LVSB.
Supplied to PT PLN (Persero)Distribusi Jakarta & Tangerang
PT PLN (Persero)Distribusi Jawa Barat & Bandung
Supplied to PT PLN (Persero)Manado - Wilayah Sulutenggo
Mobile Substation
Supplied to PT PLN (Persero)Wilayah SulutenggoWilayah Solok - Sumatra Barat
PHBTR Type PD.630-A-4A-LBSSPLN D3.016-2:2013
PHBTR Type PD.1000-A-6LBSSPLN D3.016-2:2013
12. Solution for Utility (PLN) 13. Solution for Utility (PLN)
PHB-TR 250A 2 jurusan-LBS
Compact Substation 1 FloorPHBTR Type PD.1000-A-8-LBS
SPLN D3.016-2:2013
LV Distribution Switchboard
Supplied to PT PLN (Persero)Distribusi Jawa Barat dan Bandung
Supplied to PT PLN (Persero)Distribusi Jakarta dan Tangerang
Area Cempaka Putih - 2012
Supplied to PLTD Kota FajarAceh Selatan
Supplied to PT PLN (Persero)Wilayah AcehWilayah KaltimaraWilayah Sulutenggo
SPLN D3.016 - 1:2010
PHB-TR Type PL-630A-4-LBS
Supplied to PT PLN (Persero)Wilayah AcehWilayah KaltimaraWilayah Sulutenggo\Wilayah RiauWilayah Papua
SPLN D3.016 - 1:2010
14. Solution for Industries 15. Solution for Industries
LV Distribution Switchboard
LV Distribution Switchboard
FUJI Inverter Switchboard
PM Switchboard has served private sectors industries and
commercial buildings, with premium quality switchboard.
PM feel very strongly about building long term and lasting
relationship with our end user and ME Contractor partner.
We work together with our partners to find best solutions
for their requirements.
Supplied to Biznet TechnoparkGunung Putri
Supplied to PAMA PersadaKalimantan Project
Supplied to Cyber 2 Data CenterJakarta
16. Solution for Industries 17. Solution for Industries
LVDB Switchboard
Supplied to Shinta Prima Feedmill
MV Switchboard LV Capacitor Bank
Fast Switching Capacitor Bank
with MV CapacitorSupplied to Trafindo - Plant 2Jati Uwung - Tangerang
with Janitza & Vishay ComponentsSupplied to ASTRA Daihatsu Motor
Karawang Plant
with VEI Italy SwitchgearSupplied to Thousands of users
18. Solution for Commercial Building 19. Solution for Commercial Building
ABB MV and LV Switchboard
Supplied to Mall Jayapura
PM-EA MV Switchboard & LVDB
LV MCC Switchboard
LVDB
Supplied to Supermall KarawaciTangerang
Supplied to PAHOA SchoolSerpong
Supplied to Tang City MallTangerang
20. Solution for Commercial Building 21. Solution for Commercial Building
LV Switchboard
LV-MDP
LV-MDP
Supplied to RS UNAIRSurabaya
Supplied to G3TVJakarta
Supplied to Swiss BelhotelBali
22. Switchboard Components 23. Energy Efficiency Solution
Energy Management So ftware
Energy Management System
EMS
24. Partners
Contractors
CONSTRUCTION & INVESTMENT
PT WIJAYA KARYA Tbk
MECHANICAL & ELECTRICAL ENGINEERSPT. METAKOM INTI
pt ARNAN PRATAMA CONSULTANTS
MECHANICAL ELECTRICAL CONSULTAN
PT. MALMASS MITRA TEKNIK
MATRIK
ENGINEERING CONSULTANT & SERVICES
SKEMANUSAMECHANICAL & ELECTRICAL ENGINEERING SERVICE
Surya Marga Luhur p.t.air conditioning - mechanical - electrical
engineering & contractor PT. MEGA PERSADA INDONESIA
MECHANICAL & ELECTRICAL ENGINEERS
Metakom Prabata Group
PEN
Premium Switchboard Solution
Consultants
Supplier Partners
ACTIVITIES
Recommended