View
5
Download
0
Category
Preview:
Citation preview
Vibration Insulation
www.berleburger.de
CONSTRUCTION | INDUSTRY Regupol®
TechnicalData forRegupol®BA, SH, PL, HT, XHT, MF
CONSTRUCTION | INDUSTRY
Vibration Absorption and StructureBorne Sound Insulation
The expanded product spectrum for vibration damping with Regupol®includes Regupol® types characterizedby different load bearing characteristics.Regupol® vibration insulation consists ofa number of different polyurethane-bound rubber granulates that effectively
cover load ranges from 0.01 to 1.50N/mm2 in six different material types.The Institute for Structural Dynamics at Dresden Technical University has carried out extensive studies of thesematerial types.Regupol® has been known for many
years for its homogeneity and as a reliable product in the field of vibrationinsulation. With the expanded productspectrum and coverage of higher loadranges, BSW is now upgrading its competence in the area of vibration technology.
Fields of application
Road construction
In track-laying and tunnel construct-ion, as well as in road and bridge construction, BSW materials are usedto damp vibrations and to protectstructures form damaging vibrations.
Foundations
Buildings with load distribution platesrest on Regupol® to protect themagainst ground vibrations.
Structural engineering
Whether in lift motors, pumps, ventilation systems or block-type thermal power stations, Regupol® iseasy to install and has a long useful life.
Industry
In industrial applications, Regupol®
is used for active insulation of machinesand passive insulation of floor plates onwhich fine measuring equipment isinstalled, in laboratory rooms and inmeasuring booths. Both sub-criticalamd hyper-critical mounts are possible.
Standard sizes, on stock:
Thickness:Thicknesses vary according to type.Special thicknesses available onrequest.
Rolls:width 1,250 mmlength 10,000 mmSpecial lengths possibledie-cutting, water-jet cutting,self adhesive possible
Load Ranges
BA SH / PL HT XHT MF
Regupol1.50
0.80
0.25
0.10
0.05
0.00
Load
ran
ge (
N/m
m2)
1 Load Deflection
Spec
ific
load
(N
/mm
2)
Deflection (mm)
Samples: 300 mm x 300 mm
Load Ranges
BA SH / PL HT XHT MF
Regupol BA1.50
0.80
0.25
0.10
0.05
0.00
Load
ran
ge (
N/m
m2)
0,050
0,040
0,030
0,020
0,010
0,000
17 mm
51 mm
34 mm
0 1 2 3 4 5 6 7 8 9 10 11 12
Regupol BA
Samples: 300 mm x 300 mm
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Dis
turb
ing
freq
uenc
y (H
z)
40 dB/99% 30 dB/97%
20 dB/90%
10 dB/69%
0 dB/0%
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration InsulationRegupol BA
Reg
upol
BA
Spec
ific
load
(N
/mm
2)
0.050
0.045
0.040
0.035
0.030
0.025
0.020
0.015
0.010
0.005
0.000
51 mm 34 mm 17 mm
Natural frequency (Hz)
3 Natural FrequencyRegupol BA
Parameter: Power transmission loss (dB), isolation factor in %
Specific load (N/mm2)
Elas
tic m
odul
us (
N/m
m2)
40 Hz
5 Hz
static
Samples: 300 mm x 300 mm x 34 mm
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.00.000 0.005 0.01 0.015 0.020 0.025 0.030 0.035 0.040 0.045 0.050
4 Modulus of ElasticityRegupol BA
5 Dynamic Rigidity
Dyn
amic
rig
idity
(N
/mm
3)
0.06
0.05
0.04
0.03
0.02
0.01
0.00
60
50
40
30
20
10
0
Permanent load (N/mm2)
40 Hz
5 Hz
static
Samples: 300 mm x 300 mm x 34 mm
0.000 0.010 0.02 0.030 0.040 0.050
Dyn
amic
rig
idity
(M
N/m
3)
Regupol BA
10 Hz
10 Hz
Reg
upol
BA
Rel
ativ
e de
flect
ion
(% o
f thi
ckne
ss)
Loading time (hrs)
0.025 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep TestRegupol BA
8
6
4
2
0
Technical Data
Static Modulus Similar Tantgential modulusof Elasticity to EN 826 0.10-0.44 N/mm2 see fig. 4
Dynamic Modulus Similar to Depending on load and frequency,of Elasticity DIN 53513 0.15-1.10 N/mm2 see fig. 4
measured 30 minutes after decompressionCompression Set DIN 53572 approx. 4.10 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.30 N/mm2 Minimum
Elongation at Break DIN 53571 60 % Minimum
Tear-Resistance DIN 53515 3.0 N/mm Minimum
Inflammability DIN 4102 B 2 - Normal inflammable
Standard supply forms ex warehouse:
Thickness: 17 mm, profiled
Rolls:
Stripping/plates:
Width: 1,250 mm
Length: 10,000 mm
On request
Regupol® is made of polyurethane-bound rubber-granulate.
Permanent static load range:0.05 N/mm2
Samples: 300 mm x 300 mm x 34 mm
The information on this data sheet is based on the current state of our knowledge and experience and is subject to changes and production-related variations without notice.
1 Load Deflection
Spec
ific
load
(N
/mm
2)
Deflection (mm)
Samples: 300 mm x 300 mm
Load Ranges
6010 BA 6010 SH / 6010 PL 6010 HT 6010 XHT 6010 MF
Regupol SH1.50
0.80
0.25
0.10
0.05
0.00
Load
ran
ge (
N/m
m2)
0,10
0,09
0,08
0,07
0,06
0,05
0,04
0,03
0,02
0,01
0,00
30 mm15 mm 45 mm
60 mm
0 1 2 3 4 5 6 7 8
Regupol SH
Reg
upol
SH
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Dis
turb
ing
freq
uenc
y (H
z)
40 dB/99% 30 dB/97%
20 dB/90%
10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration InsulationRegupol SH
Spec
ific
load
(N
/mm
2)
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
45 mm
60 mm
30 mm
15 mm
Natural frequency (Hz)
Samples: 300 mm x 300 mm
3 Natural FrequencyRegupol SH
Specific load (N/mm2)
Elas
tic m
odul
us (
N/m
m2)
40 Hz
10 Hz
5 Hz
static
Samples: 300 mm x 300 mm x 30 mm
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
4 Modulus of ElasticityRegupol SH
5 Dynamic Rigidity
Dyn
amic
rig
idity
(N
/mm
3)
0.10
0.08
0.06
0.04
0.02
0.00
100
80
60
40
20
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300 mm x 300 mm x 30 mm
0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Dyn
amic
rig
idity
(M
N/m
3)
Regupol SH
Technical Data
Static Modulus Similar to Tangential modulusof Elasticity DIN 53513 0.8 -0.90 N/mm2 see fig. 4
Dynamic Modulus Similar to Depending on load and frequency,of Elasticity DIN 53513 0.6 -2.20 N/mm2 see fig. 4
Mechanical Loss Factor DIN 53513 - -
measured 30 minutes after decompressionCompression Set DIN 53572 approx. 4.0 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.40 N/mm2 Minimum
Elongation at Break DIN 53571 70 % Minimum
Tear-Resistence DIN 53515 3.40 N/mm Minimum
Inflammability DIN 4102 B 2 - Normal inflammable
Reg
upol
SH
Rel
ativ
e de
flect
ion
(% o
f thi
ckne
ss)
Loading time (hrs)
0.05 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep TestRegupol SH
4
3
2
1
0
Samples: 300 mm x 300 mm x 30 mm
The information on this data sheet is based on the current state of our knowledge and experience and is subject to changes and production-related variations without notice.
Standard supply forms ex warehouse:
Thickness: 15 mm
Rolls:
Stripping/plates:
Width: 1,250 mm
Length: 10,000 mm
On request
Regupol® is made of polyurethane-bound rubber-granulate.
Permanent static load range:0.1 N/mm2
1 Load Deflection
Spec
ific
load
(N
/mm
2)
Samples: 300 mm x 300 mm
Deflection (mm)
Load Ranges
6010 BA 6010 SH / 6010 PL 6010 HT 6010 XHT 6010 MF
Regupol PL1.50
0.80
0.25
0.10
0.05
0.00
Load
ran
ge (
N/m
m2)
0,10
0,09
0,08
0,07
0,06
0,05
0,04
0,03
0,02
0,01
0,00
50 mm 100 mm
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Regupol PL
Reg
upol
PL
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Dis
turb
ing
freq
uenc
y (H
z)
40 dB/99% 30 dB/97%
20 dB/90%
10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration InsulationRegupol PL
Spec
ific
load
(N
/mm
2)
0.10
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
100 mm 50 mm
Natural frequency (Hz)
Samples: 300 mm x 300 mm
3 Natural FrequencyRegupol PL
Specific load (N/mm2)
Elas
tic m
odul
us (
N/m
m2)
40 Hz
10 Hz
5 Hz
static
Samples: 300 mm x 300 mm x 50 mm
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
4 Modulus of ElasticityRegupol PL
5 Dynamic Rigidity
Dyn
amic
rig
idity
(N
/mm
3)
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0.00
70
60
50
40
30
20
10
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300 mm x 300 mm x 50 mm
0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10
Dyn
amic
rig
idity
(M
N/m
3)
Regupol PL
Technical Data
Static Modulus Similar to Tangential modulusof Elasticity DIN 53513 0.25-0.75 N/mm2 see fig. 4
Dynamic Modulus Similar to Depending on load and frequency,of Elasticity DIN 53513 0.60-2.90 N/mm2 see fig. 4
measured 30 minutes after decompressionCompression Set DIN 53572 approx. 5.40 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.33 N/mm2 Minimum (measured on a 10-cm-layer)
Elongation at Break DIN 53571 50 % Minimum (measured on a 10-cm-layer)
Tear-Resistance DIN 53515 2.30 N/mm Minimum (measured on a 10-cm-layer)
Inflammability DIN 4102 B 2 - Normal inflammable
Reg
upol
PL
Rel
ativ
e de
flect
ion
(% o
f thi
ckne
ss)
Loading time (hrs)
0.05 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep TestRegupol PL
6
5
4
3
2
1
0
Samples: 300 mm x 300 mm x 50 mm
The information on this data sheet is based on the current state of our knowledge and experience and is subject to changes and production-related variations without notice.
Standard supply forms ex warehouse:
Thickness: 50 mm
Rolls:
Stripping:
Width: 500 mm
Length: 1,000 mm
On request
Regupol® is made of polyurethane-bound rubber-granulate.
Permanent static load range:0.1 N/mm2
1 Load Deflection
Spec
ific
load
(N
/mm
2)
Deflection (mm)
Samples: 300 mm x 300 mm
Load Ranges
BA SH / PL HT XHT MF
Regupol HT1.50
0.80
0.25
0.10
0.05
0.00
Load
ran
ge (
N/m
m2)
0,25
0,20
0,15
0,10
0,05
0,00
15 mm 30 mm
45 mm
60 mm
0 1 2 3 4 5 6 7 8 9 10 11
Regupol HT
Reg
upol
HT
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Dis
turb
ing
freq
uenc
y (H
z)
40 dB/99% 30 dB/97%
20 dB/90%
10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration InsulationRegupol HT
Spec
ific
load
(N
/mm
2)
0.25
0.20
0.15
0.10
0.05
0.00
60 mm
30 mm
15 mm
45 mm
Natural frequency (Hz)
Samples: 300 mm x 300 mm
3 Natural FrequencyRegupol HT
Specific load (N/mm2)
Elas
tic m
odul
us (
N/m
m2)
40 Hz
10 Hz
5 Hz
static
Samples: 300 mm x 300 mm x 30 mm
6
5
4
3
2
1
0
0.00 0.05 0.10 0.15 0.20 0.25
4 Modulus of ElasticityRegupol HT
5 Dynamic Rigidity
Dyn
amic
rig
idity
(N
/mm
3)
0.20
0.15
0.10
0.05
0.00
200
150
100
50
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 300 mm x 300 mm x 30 mm
0.000 0.025 0.050 0.075 0.100 0.125 0.150 0.175 0.200 0.225 0.250
Regupol HT
Dyn
amic
rig
idity
(M
N/m
3)
Technical Data
Static Modulus Similar to Tangential modulusof Elasticity DIN 53513 1.20-1.90 N/mm2 see fig. 4
Dynamic Modulus Similar to Depending on load and frequency,of Elasticity DIN 53513 1.10-4.40 N/mm2 see fig. 4
measured 30 minutes after decompressionCompression Set DIN 53572 approx. 4.60 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.65 N/mm2 Minimum
Elongation at Break DIN 53571 65 % Minimum
Tear-Resistance DIN 53515 6.0 N/mm Minimum
Inflammability DIN 4102 B 2 - Normal inflammable
Reg
upol
HT
Rel
ativ
e de
flect
ion
(% o
f thi
ckne
ss)
Loading time (hrs)
0.125 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep TestRegupol HT
6
5
4
3
2
1
0
Samples: 300 mm x 300 mm x 30 mm
The information on this data sheet is based on the current state of our knowledge and experience and is subject to changes and production-related variations without notice.
Standard supply forms ex warehouse:
Thickness: 15 mm
Rolls:
Stripping/plates:
Width: 1,250 mm
Length: 10,000 mm
On request
Regupol® is made of polyurethane-bound rubber-granulate.
Permanent static load range:0.25 N/mm2
1 Load Deflection
Spec
ific
load
(N
/mm
2)
Deflection (mm)
Samples: 270 mm x 270 mm
Load Ranges
BA SH / PL HT XHT MF
Regupol XHT1.50
0.80
0.25
0.10
0.05
0.00
Load
ran
ge (
N/m
m2)
0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0,0
10 mm
20 mm 30 mm 40 mm
50 mm
60 mm
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Regupol XHT
Reg
upol
XH
T
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Dis
turb
ing
freq
uenc
y (H
z)
40 dB/99% 30 dB/97%
20 dB/90%
10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration InsulationRegupol XHT
Spec
ific
load
(N
/mm
2)
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
10 mm
20 mm
30 mm40 mm
50 mm
60 mm
Natural frequency (Hz)
Samples: 270 mm x 270 mm
3 Natural FrequencyRegupol XHT
Specific load (N/mm2)
Elas
tic m
odul
us (
N/m
m2)
40 Hz
10 Hz
5 Hz
static
Samples: 270 mm x 270 mm x 20 mm
16
14
12
10
8
6
4
2
0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
4 Modulus of ElasticityRegupol XHT
5 Dynamic Rigidity
Dyn
amic
rig
idity
(N
/mm
3)
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
800
700
600
500
400
300
200
100
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 270 mm x 270 mm x 20 mm
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Dyn
amic
rig
idity
(M
N/m
3)
Regupol XHT
Reg
upol
XH
T
Rel
ativ
e de
flect
ion
(% o
f thi
ckne
ss)
Loading time (hrs)
0.4 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep TestRegupol XHT
4
3
2
1
0
Technical Data
Static Modulus Similar to Tangential modulusof Elasticity EN 826 2.50-5.50 N/mm2 see fig. 4
Dynamic Modulus Similar to Depending on load and frequency,of Elasticity DIN 53513 3.0-8.80 N/mm2 see fig. 4
Mechanical Loss Factor DIN 53513 - -
measured 30 minutes after decompressionCompression Set DIN 53572 approx. 5.90 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 0.90 N/mm2 Minimum
Elongation at Break DIN 53571 85 % Minimum
Tear-Resistance DIN 53515 8.0 N/mm Minimum
Inflammability DIN 4102 B 2 - Normal inflammable
Samples: 270 mm x 270 mm x 30 mm
The information on this data sheet is based on the current state of our knowledge and experience and is subject to changes and production-related variations without notice.
Standard supply forms ex warehouse:
Thickness: 10 mm
Rolls:
Stripping/plates:
Width: 1,250 mm
Length: 8,000 mm
On request
Regupol® is made of polyurethane-bound rubber-granulate.
Permanent static load range:0.8 N/mm2
1 Load Deflection
Spec
ific
load
(N
/mm
2)
Deflection (mm)
Samples: 200 mm x 200 mm
Load Ranges
BA SH / PL HT XHT MF
Regupol MF1.50
0.80
0.25
0.10
0.05
0.00
Load
ran
ge (
N/m
m2)
1,5
1,4
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
0,1
0,00 1 2 3 4 5 6 7 8 9 10
Regupol MF
10 mm
20 mm
30 mm40 mm
50 mm
60 mm
Reg
upol
MF
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Natural frequency of the system (Hz)
Dis
turb
ing
freq
uenc
y (H
z)
40 dB/99% 30 dB/97%
20 dB/90%
10 dB/69%
0 dB/0%
Parameter: Power transmission loss (dB), isolation factor in %
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
2 Vibration InsulationRegupol MF
Spec
ific
load
(N
/mm
2)
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Natural frequency (Hz)
Samples: 200 mm x 200 mm
3 Natural FrequencyRegupol MF
10 mm
20 mm
30 mm40 mm50 mm
60 mm
Specific load (N/mm2)
Elas
tic m
odul
us (
N/m
m2)
40 Hz
5 Hz
static
Samples: 200 mm x 200 mm x 20 mm
40
35
30
25
20
15
10
5
0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
4 Modulus of ElasticityRegupol MF
10 Hz
5 Dynamic Rigidity
Dyn
amic
rig
idity
(N
/mm
3)
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
2000
1800
1600
1400
1200
1000
800
600
400
200
0
Permanent load (N/mm2)
40 Hz
10 Hz
5 Hz
static
Samples: 200 mm x 200 mm x 20 mm
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
Dyn
amic
rig
idity
(M
N/m
3)
Regupol MF
Reg
upol
MF
Rel
ativ
e de
flect
ion
(% o
f thi
ckne
ss)
Loading time (hrs)
0.75 N/mm2
1 10 100 1000 10000 100000
6 Long-term Creep TestRegupol MF
4
3
2
1
0
Technical Data
Static Modulus Similar Tangential modulusof Elasticity to EN 826 9.80-14.0 N/mm2 see fig. 4
Dynamic Modulus Similar to Depending on load and frequency,of Elasticity DIN 53513 4.0-18.50 N/mm2 see fig. 4
measured 30 minutes after decompressionCompression Set DIN 53572 approx. 5.0 % with 50% deformation/23˚C after 72 hrs.
Tensile Strength DIN 53571 2.20 N/mm2 Minimum
Elongation at Break DIN 53571 120 % Minimum
Tear-Resistance DIN 53515 16.0 N/mm Minimum
Inflammability DIN 4102 B 2 - Normal inflammable
Samples: 200 mm x 200 mm x 30 mm
The information on this data sheet is based on the current state of our knowledge and experience and is subject to changes and production-related variations without notice.
Standard supply forms ex warehouse:
Thickness: 10 mm
Rolls:
Stripping/plates:
Width: 1,250 mm
Length: 8,000 mm
On request
Regupol® is made of polyurethane-bound rubber-granulate.
Permanent static load range:1.5 N/mm2
Manufactured in accordancewith highest industrialsafety and environmentalstandards. Award winningmanufacturing process.
Certified according to
DIN EN ISO 9001DIN EN ISO 14001
OHSAS 18001
BSW
DR
GB
01 0
2 0
7
Berleburger Schaumstoffwerk GmbH
Postfach 1180
57301 Bad Berleburg (Germany)
Telephone +49 2751 803-0
Telefax +49 2751 803-109
E-Mail info@berleburger.de
Internet www.berleburger.de
Regupol® is the material from which BSW
GmbH manufactures a wide variety of
materials for vibration insulation as well as
insulation and protection stripping for the
construction industry. Regupol® consists of a
number of different polyurethane-bound rubber
granulates. Regupol® products are highly
adaptable, have a long useful life, can bear
high-level loads and are 100% recyclable.
Object-specific, individual production as well
as customer-specific finishing, packaging and
storage ensure rapid, application-specific
solutions.
Also in the BSW product programme: Regufoam®
The material Regufoam® achieves top levels
in vibration absorption and insulation of
structure-borne noise. This material is a hydro-
lysis-proof and rot-proof polyurethane foam
that is manufactured in six different grades
according to firmness. These different degrees
of hardness are colour-labelled to prevent
confusion. Selection form amongst the
different types depends on the load involved.
They are available in standard thicknesses of
12 and 25 mm and combinations thereof.
Regufoam® shows very low intrinsic frequency
levels within the relevant load ranges, resulting
in high noise insulation values. Another
advantage of this insulation material is its
relatively low compression ratio, combined
with enormous resilience. Regufoam® can be
used in a wide variety of applications. The
material is used wherever structure-borne
sound and vibrations require highly effective
insulation. This includes the fields of structural
and civil engineering and track-laying.
Regufoam® also plays an important role in
mechanical engineering and shipbuilding. The
standard supply form for this material is in
rolls. Stamped parts, cutouts produced with a
water jet and mould-formed articles are also
available on request.
Worldwide consulting and sales:
Germany BSW GmbH
Australia Regupol Australia Pty.
www.berleburger.deSee our website for further information on
our products. At the website, you can also
order product samples online and
communicate directly with your contact
person at BSW.
Regupol®
Regufoam®
Recommended