Checklist for architectural design students

Checklist for Architectural Design drawings

Site Plan

1. Scale and North2. Roads with width3. Compound wall with gate4. Location of vehicular parking5. Roof plan of the building with sciography6. Demarcation of hard and soft areas7. Plantation8. Basic levels9. Section symbols

Floor Plans

1. Scale and North2. Basic Internal layouts of all rooms3. Levels to be mentioned at every level change4. Room Names and Dimensions5. Overall Dimensions of the building6. Dimensions at every plane change7. Toilet fixture layout8. All doors and windows9. Lines to be drawn at every material and level

change

Floor Plans

10. Projection lines above in dotted (chajjas, eaves projections, roof lines)

11. Cutouts above in dotted12. Cutouts below in firm lines13. Section and Elevation symbols

Sections

1. Scale2. Levels in the prescribed format3. Names of spaces4. Heights wherever required5. Distinctly rendered walling and roofing components6. Windows and doors with lintels7. Parapet wall with waterproofing line.8. Chajjas, eaves projections9. Roofing members10. Ground line to stretch across the sheet11. Section name

Elevations

1. Scale2. Levels in the prescribed format3. Materials of the facade4. Sciography5. Chajjas, eaves projections6. Ground line to stretch across the sheet7. Elevation name